Related references
Note: Only part of the references are listed.Efficient solar hydrogen production coupled with organics degradation by a hybrid tandem photocatalytic fuel cell using a silicon-doped TiO2 nanorod array with enhanced electronic properties
Qingyi Zeng et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Electrochemical Phase Evolution of Metal-Based Pre-Catalysts for High-Rate Polysulfide Conversion
Meng Zhao et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)
Towards stable lithium-sulfur battery cathodes by combining physical and chemical confinement of polysulfides in core-shell structured nitrogen-doped carbons
Runyu Yan et al.
CARBON (2020)
One-Pot Fabrication of Crumpled N-Doped Graphene Anchored with Cobalt for High-Performance Lithium-Sulfur Batteries
Mao Wutao et al.
CHEMELECTROCHEM (2020)
β-FeOOH Interlayer With Abundant Oxygen Vacancy Toward Boosting Catalytic Effect for Lithium Sulfur Batteries
Yingying Li et al.
FRONTIERS IN CHEMISTRY (2020)
Interface enhanced well -dispersed Co 9 S 8 nanocrystals as an efficient polysulfide host in lithium?sulfur batteries
Xue Liu et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
Facet-tailoring five-coordinated Ti sites and structure-optimizing electron transfer in a bifunctional cathode with titanium nitride nanowire array to boost the performance of Li2S6-based lithium-sulfur batteries
Chenyang Zha et al.
ENERGY STORAGE MATERIALS (2020)
Strong lithium polysulfides chemical trapping of TiC-TiO2/S composite for long-cycle lithium-sulfur batteries
Zhenqi Cui et al.
ELECTROCHIMICA ACTA (2019)
Freestanding sulfur-graphene oxide/carbon composite paper as a stable cathode for high performance lithium-sulfur batteries
Jinmin Kim et al.
ELECTROCHIMICA ACTA (2019)
Capture and Catalytic Conversion of Polysulfides by In Situ Built TiO2-MXene Heterostructures for Lithium-Sulfur Batteries
Long Jiao et al.
ADVANCED ENERGY MATERIALS (2019)
Construction of Oxygen-Deficient La(OH)3 Nanorods Wrapped by Reduced Graphene Oxide for Polysulfide Trapping toward High-Performance Lithium/Sulfur Batteries
Yuan Tian et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Natural Vermiculite Enables High-Performance in Lithium-Sulfur Batteries via Electrical Double Layer Effects
Feixiang Wu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Hollow Multi-Shelled Structural TiO2-x with Multiple Spatial Confinement for Long-Life Lithium-Sulfur Batteries
Esmail Husein M. Salhabi et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
TiO2 nanoparticles incorporation in carbon nanofiber as a multifunctional interlayer toward ultralong cycle-life lithium-sulfur batteries
Shanshan Yao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Promoting polythionate intermediates formation by oxygen-deficient manganese oxide hollow nanospheres for high performance lithium-sulfur batteries
Jiawen Wu et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Fabrication of Ti3+ doped TiO2 coated Mn3O4 nanorods with voids and channels for lithium storage
Mingyue Wang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Hollow Carbon Nanoballs Coupled with Ultrafine TiO2 Nanoparticles as Efficient Sulfur Hosts for Lithium-Sulfur Batteries
Hangyu Gu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Bi-structural fibers of carbon nanotube coated with nitrogen/oxygen dual-doped porous carbon layer as superior sulfur host for lithium-sulfur batteries
Bo Nie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A three-dimensional conductive cross-linked all-carbon network hybrid as a sulfur host for high performance lithium-sulfur batteries
Mengying Ren et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Large-scaled covalent triazine framework modified separator as efficient inhibit polysulfide shuttling in Li-S batteries
Qing Xuan Shi et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Pitch-derived yolk-shell-structured carbon microspheres as efficient sulfur host materials and their application as cathode material for Li-S batteries
Gi Dae Park et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Nanosized Fe7S8 with high surface area as polysulfide capturer combined with graphene for Li-S battery cathode
Hang Zhang et al.
ELECTROCHIMICA ACTA (2019)
Controllable synthesis of mesoporous carbon microspheres with renewable water glass as a template for lithium-sulfur batteries
Wendi Cai et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Synthesis of carbon coated Fe3O4 grown on graphene as effective sulfur-host materials for advanced lithium/sulfur battery
Haipeng Li et al.
JOURNAL OF POWER SOURCES (2019)
Large-scale fabrication of reduced graphene oxide-sulfur composite films for flexible lithium-sulfur batteries
Yue Liu et al.
JOURNAL OF ENERGY CHEMISTRY (2019)
MOFs-derived nitrogen-doped carbon interwoven with carbon nanotubes for high sulfur content lithium-sulfur batteries
Maru Dessie Walle et al.
APPLIED SURFACE SCIENCE (2019)
Efficient polysulfides anchoring for Li-S batteries: Combined physical adsorption and chemical conversion in V2O5 hollow spheres wrapped in nitrogen-doped graphene network
Xiao-Tian Gao et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Synthesis of nitrogen-doped oxygen-deficient TiO2-x/reduced graphene oxide/sulfur microspheres via spray drying process for lithium-sulfur batteries
Guifeng Chen et al.
ELECTROCHIMICA ACTA (2019)
Interlayer Material Selection for Lithium-Sulfur Batteries
Linlin Fan et al.
JOULE (2019)
Oxygen-deficient titanium dioxide as a functional host for lithium-sulfur batteries
Hong-En Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
A facile and effective sulfur loading method: Direct drop of liquid Li2S8 on carbon coated TiO2 nanowire arrays as cathode towards commercializing lithium-sulfur battery
Chenyang Zha et al.
ENERGY STORAGE MATERIALS (2019)
Promoting polysulfide conversion by catalytic ternary Fe3O4/carbon/graphene composites with ordered microchannels for ultrahigh-rate lithium-sulfur batteries
Meng Ding et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Effective exposure of nitrogen heteroatoms in 3D porous graphene framework for oxygen reduction reaction and lithium-sulfur batteries
Jia-Le Shi et al.
JOURNAL OF ENERGY CHEMISTRY (2018)
Preparation of SnO2@rGO/CNTs/S composite and application for lithium-sulfur battery cathode material
Qingqing Liu et al.
APPLIED SURFACE SCIENCE (2018)
Three-dimensional hierarchical porous TiO2/graphene aerogels as promising anchoring materials for lithium-sulfur batteries
Jia Wang et al.
ELECTROCHIMICA ACTA (2018)
Three-dimensional TiO2-B nanotubes/carbon nanotubes intertwined network as sulfur hosts for high performance lithium - sulfur batteries
Ao Chen et al.
JOURNAL OF POWER SOURCES (2018)
Co3O4-NP embedded mesoporous carbon rod with enhanced electrocatalytic conversion in lithium-sulfur battery
Shaofeng Wang et al.
SCIENTIFIC REPORTS (2018)
Promoting polysulfide redox reactions and improving electronic conductivity in lithium-sulfur batteries via hierarchical cathode materials of graphene-wrapped porous TiO2 microspheres with exposed (001) facets
Chenyang Zha et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Pea-pod-like nitrogen-doped hollow porous carbon cathode hosts decorated with polar titanium dioxide nanocrystals as efficient polysulfide reservoirs for advanced lithium-sulfur batteries
Weiqi Yao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Insight of Enhanced Redox Chemistry for Porous MoO2 Carbon-Derived Framework as Polysulfide Reservoir in Lithium-Sulfur Batteries
Chunli Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
A review of atomic layer deposition providing high performance lithium sulfur batteries
Bo Yan et al.
JOURNAL OF POWER SOURCES (2017)
A thin multifunctional coating on a separator improves the cyclability and safety of lithium sulfur batteries
Guiyin Xu et al.
CHEMICAL SCIENCE (2017)
Nanoarchitecture of MOF-derived nanoporous functional composites for hybrid supercapacitors
Jeonghun Kim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Calendering of free-standing electrode for lithium-sulfur batteries with high volumetric energy density
Pei-Yan Zhai et al.
CARBON (2017)
Hollow carbon spheres with TiO2 encapsulated sulfur and polysulfides for long-cycle lithium-sulfur batteries
Jia Yao et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Graphene-Li2S-Carbon Nanocomposite for Lithium-Sulfur Batteries
Feixiang Wu et al.
ACS NANO (2016)
CaO-Templated Growth of Hierarchical Porous Graphene for High-Power Lithium-Sulfur Battery Applications
Cheng Tang et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Porous CNTs/Co Composite Derived from Zeolitic Imidazolate Framework: A Lightweight, Ultrathin, and Highly Efficient Electromagnetic Wave Absorber
Yichao Yin et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Atomic layer deposited TiO2 on a nitrogen-doped graphene/sulfur electrode for high performance lithium-sulfur batteries
Mingpeng Yu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Powering Lithium-Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Zhe Yuan et al.
NANO LETTERS (2016)
A sulfur host based on titanium monoxide@carbon hollow spheres for advanced lithium-sulfur batteries
Zhen Li et al.
NATURE COMMUNICATIONS (2016)
Graphitic Carbon Conformal Coating of Mesoporous TiO2 Hollow Spheres for High-Performance Lithium Ion Battery Anodes
Hao Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Absorption mechanism of carbon-nanotube paper-titanium dioxide as a multifunctional barrier material for lithium-sulfur batteries
Guiyin Xu et al.
NANO RESEARCH (2015)
Ammonia cation-assisted bubble template for synthesizing hollow TiO2 nanospheres and their application in lithium ion storage
Liuyang Long et al.
RSC ADVANCES (2015)
Lithium Iodide as a Promising Electrolyte Additive for Lithium-Sulfur Batteries: Mechanisms of Performance Enhancement
Feixiang Wu et al.
ADVANCED MATERIALS (2015)
Hierarchical Vine-Tree-Like Carbon Nanotube Architectures: In-Situ CVD Self-Assembly and Their Use as Robust Scaffolds for Lithium-Sulfur Batteries
Meng-Qiang Zhao et al.
ADVANCED MATERIALS (2014)
Aerosol assisted chemical vapor deposition of conductive and photocatalytically active tantalum doped titanium dioxide films
Salem M. Bawaked et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Synthesis of hydrogenated TiO2-reduced-graphene oxide nanocomposites and their application in high rate lithium ion batteries
Jie Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Nanoporous Li2S and MWCNT-linked Li2S powder cathodes for lithium-sulfur and lithium-ion battery chemistries
Feixiang Wu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)