Related references
Note: Only part of the references are listed.Delamination formation and suppression during rotary ultrasonic elliptical machining of CFRP
Daxi Geng et al.
COMPOSITES PART B-ENGINEERING (2020)
The effects of elliptical ultrasonic vibration in surface machining of CFRP composites using rotary ultrasonic machining
Hui Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A cutting force prediction model for rotary ultrasonic side grinding of CFRP composites considering coexistence of brittleness and ductility
Haiyan Shi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A feeding-directional cutting force model for end surface grinding of CFRP composites using rotary ultrasonic machining with elliptical ultrasonic vibration
Hui Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)
Delamination in rotary ultrasonic machining of CFRP composites: finite element analysis and experimental implementation
Dongzhe Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A novel investigation on horizontal and 3D elliptical ultrasonic vibrations in rotary ultrasonic surface machining of carbon fiber reinforced plastic composites
Hui Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
A mechanistic cutting force model based on ductile and brittle fracture material removal modes for edge surface grinding of CFRP composites using rotary ultrasonic machining
Hui Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Review of ultrasonic vibration-assisted machining in advanced materials
Zhichao Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)
Delamination formation, evaluation and suppression during drilling of composite laminates: A review
Daxi Geng et al.
COMPOSITE STRUCTURES (2019)
A mechanistic model on feeding-directional cutting force in surface grinding of CFRP composites using rotary ultrasonic machining with horizontal ultrasonic vibration
Hui Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Evaluation of surface roughness based on sampling array for rotary ultrasonic machining of carbon fiber reinforced polymer composites
Haiyan Shi et al.
MEASUREMENT (2019)
Rotary ultrasonic machining of carbon fiber-reinforced plastic composites: effects of ultrasonic frequency
Hui Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Rotary ultrasonic machining of carbon fiber reinforced plastic composites: a study on fiber material removal mechanism through single-grain scratching
Fuda Ning et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Feasibility study on ultrasonic-assisted drilling of CFRP/Ti stacks by single-shot under dry condition
Zhenyu Shao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Experimental study on drilling load and hole quality during rotary ultrasonic helical machining of small-diameter CFRP holes
Daxi Geng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Scratching-induced surface characteristics and material removal mechanisms in rotary ultrasonic surface machining of CFRP
Hui Wang et al.
ULTRASONICS (2019)
Edge surface grinding of CFRP composites using rotary ultrasonic machining: comparison of two machining methods
Yuanchen Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Joining of Carbon Fiber Reinforced Plastic to Aluminum Alloy by Reactive Multilayer Films and Low Power Semiconductor Laser Heating
Ying Ma et al.
APPLIED SCIENCES-BASEL (2019)
Finite element analysis and simulation study on micromachining of hybrid composite stacks using Micro Ultrasonic Machining process
Sagil James et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Parametric Study of Micro Ultrasonic Machining Process of Hybrid Composite Stacks using Finite Element Analysis
Sagil James et al.
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)
Parameters effects analysis of rotary ultrasonic machining on carbon fiber reinforced plastic (CFRP) composite using an interactive RSM Method
A. Slimane et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2019)
A Recent Investigations: Effect of Surface Grinding on CFRP using Rotary Ultrasonic Machining
R. Balaji et al.
MATERIALS TODAY-PROCEEDINGS (2019)
A study on the effects of machining variables in surface grinding of CFRP composites using rotary ultrasonic machining
Hui Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Surface grinding of CFRP composites using rotary ultrasonic machining: a comparison of workpiece machining orientations
Hui Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Grey fuzzy optimization of ultrasonic-assisted EDM process parameters for deburring CFRP composites
S. Thirumalai Kumaran et al.
MEASUREMENT (2018)
Effects of abrasive material and particle shape on machining performance in micro ultrasonic machining
Jingsi Wang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Vibration assisted drilling of CFRP/metal stacks at low frequencies and high amplitudes
Friedrich Bleicher et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2018)
Effect of cutting fluid delivery method on ultrasonic assisted edge trimming of multidirectional CFRP composites at different machining conditions
Mohamed O. Helmy et al.
19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)
Rotary ultrasonic face grinding of carbon fiber reinforced plastic (CFRP): a study on cutting force model
Shuliang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Surface grinding of CFRP composites with rotary ultrasonic machining: a mechanistic model on cutting force in the feed direction
Fuda Ning et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Modeling of tool blockage condition in cutting tool design for rotary ultrasonic machining of composites
Songmei Yuan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Cutting temperature and resulting influence on machining performance in rotary ultrasonic elliptical machining of thick CFRP
Daxi Geng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Rotary ultrasonic machining of woven CFRP composite in a cryogenic environment
S. Thirumalai Kumaran et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Measurement of burr removal rate and analysis of machining parameters in ultrasonic assisted dry EDM (US-EDM) for deburring drilled holes in CFRP composite
Rendi Kurniawan et al.
MEASUREMENT (2017)
A mechanistic ultrasonic vibration amplitude model during rotary ultrasonic machining of CFRP composites
Fuda Ning et al.
ULTRASONICS (2017)
Feasibility study of ultrasonic elliptical vibration-assisted reaming of carbon fiber reinforced plastics/titanium alloy stacks
Daxi Geng et al.
ULTRASONICS (2017)
Experimental and numerical study of ultrasonically-assisted drilling
Mohammad Lotfi et al.
ULTRASONICS (2017)
Analysis of Tool Wear, Cutting Force, Surface Roughness and Machining Temperature During Finishing Operation of Ultrasonic Assisted Milling (UAM) of Carbon Fibre Reinforced Plastic (CFRP)
Nor Farah Huda Abd Halim et al.
ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)
Rotary Ultrasonic Surface Machining of CFRP Composites: A Comparison with Conventional Surface Grinding
Fuda Ning et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Mechanics of fibre deformation and fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites
Weixing Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Novel drill structure for damage reduction in drilling CFRP composites
Zhenyuan Jia et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
The interaction between the cutting force and induced sub-surface damage in machining of carbon fiber-reinforced plastics
Zhenyuan Jia et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Rotary Ultrasonic Machining: A Review
Ravi Pratap Singh et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Rotary ultrasonic machining of CFRP: A comparison with grinding
F. D. Ning et al.
ULTRASONICS (2016)
Ultrasonically assisted drilling of carbon fibre reinforced plastics and Ti6Al4V
Alejandro Sanda et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Surface grinding of carbon fiber-reinforced plastic composites using rotary ultrasonic machining: Effects of tool variables
Hui Wang et al.
ADVANCES IN MECHANICAL ENGINEERING (2016)
Experimental Investigation and Optimization of Machining Characteristics in Ultrasonic Machining of WC-Co Composite Using GRA Method
Ravinder Kataria et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Machinability study of ultrasonic assisted machining (UAM) of carbon fibre reinforced plastic (CFRP) with multifaceted tool
A. H. Nor Farah Huda et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
CFRP drilling: Fundamental study of local feed force and consequences on hole exit damage.
Cedric Bonnet et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Effect of speed ratio in edge routing of carbon fiber-reinforced plastics by rotary ultrasonic elliptical machining
Daxi Geng et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Rotary ultrasonic elliptical machining for side milling of CFRP: Tool performance and surface integrity
Daxi Geng et al.
ULTRASONICS (2015)
Comparison of drill wear mechanism between rotary ultrasonic elliptical machining and conventional drilling of CFRP
Daxi Geng et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Rotary ultrasonic machining of optical K9 glass using compressed air as coolant: A feasibility study
Chenglong Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Rotary ultrasonic machining of CFRP: A mechanistic predictive model for cutting force
W. L. Cong et al.
ULTRASONICS (2014)
Preliminary study on rotary ultrasonic machining of CFRP/Ti stacks
W. L. Cong et al.
ULTRASONICS (2014)
Rotary ultrasonic machining of CFRP/Ti stacks using variable feedrate
W. L. Cong et al.
COMPOSITES PART B-ENGINEERING (2013)
An analytical model of rotary ultrasonic milling
Erich Bertsche et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
ULTRASONIC MACHINING-A COMPREHENSIVE REVIEW
Jatinder Kumar
MACHINING SCIENCE AND TECHNOLOGY (2013)
Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich
Redouane Zitoune et al.
COMPOSITES PART B-ENGINEERING (2012)
Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP)
Jing Liu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Rotary ultrasonic machining of carbon fiber-reinforced plastic composites: using cutting fluid vs. cold air as coolant
W. L. Cong et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Rotary ultrasonic machining of carbon fiber reinforced plastic composites: An experimental study on cutting temperature
W. L. Cong et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Rotary ultrasonic machining of CFRP: A comparison with twist drilling
W. L. Cong et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
ROTARY ULTRASONIC MACHINING OF CARBON FIBER-REINFORCED POLYMER: FEASIBILITY STUDY
Q. Feng et al.
MACHINING SCIENCE AND TECHNOLOGY (2012)
Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics
A. Krishnamoorthy et al.
MEASUREMENT (2012)
Rotary ultrasonic machining of CFRP composites: A study on power consumption
W. L. Cong et al.
ULTRASONICS (2012)
Occurrence and propagation of delamination during the machining of carbon fibre reinforced plastics (CFRPs) - An experimental study
Wolfgang Hintze et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Rotary ultrasonic machining of CFRP using cold air as coolant: feasible regions
W. L. Cong et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Study of drilling of composite material and aluminium stack
Redouane Zitoune et al.
COMPOSITE STRUCTURES (2010)
Rotary ultrasonic machining of ceramic matrix composites: feasibility study and designed experiments
ZC Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Burr size reduction in drilling by ultrasonic assistance
SSF Chang et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2005)
Ultrasonically assisted turning of aviation materials: simulations and experimental study
VI Babitsky et al.
ULTRASONICS (2004)
Drill wear monitoring using cutting force signals
HM Ertunc et al.
MECHATRONICS (2004)
Modeling of material removal rate in rotary ultrasonic machining: designed experiments
P Hu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Modeling of material removal in mechanical type advanced machining processes: a state-of-art review
NK Jain et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Share Paper
