Related references
Note: Only part of the references are listed.Numerical evaluation of additively manufactured lattice architectures for heat sink applications
Tisha Dixit et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)
Energy absorption characteristics of additively manufactured plate-lattices under low- velocity impact loading
J. Jefferson Andrew et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)
Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing
M. F. Arif et al.
COMPOSITES PART B-ENGINEERING (2020)
Electrical conductivity of CNT/polymer composites: 3D printing, measurements and modeling
A. Mora et al.
COMPOSITES PART B-ENGINEERING (2020)
3D printed polylactic acid nanocomposite scaffolds for tissue engineering applications
Fahad Alam et al.
POLYMER TESTING (2020)
Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering
Johannes Schneider et al.
POLYMER TESTING (2020)
Bioinspired Compliance Grading Motif of Mortar in Nacreous Materials
Jabir Ubaid et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Additively Manufactured Polyetheretherketone (PEEK) with Carbon Nanostructure Reinforcement for Biomedical Structural Applications
Fahad Alam et al.
ADVANCED ENGINEERING MATERIALS (2020)
Influence of raster orientation on the determination of fracture properties of polypropylene thin components produced by additive manufacturing
M. Lorenzo-Banuelos et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Impact performance enhancement of honeycombs through additive manufacturing-enabled geometrical tailoring
J. Jefferson Andrew et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)
Tunable Energy Absorption Characteristics of Architected Honeycombs Enabled via Additive Manufacturing
S. Kumar et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
The Essential Work of Fracture parameters for 3D printed polymer sheets
I. I. Cuesta et al.
MATERIALS & DESIGN (2019)
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Milena Nadgorny et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Performance enhancement of tubular multilayers via compliance-tailoring: 3D printing, testing and modeling
M. A. Khan et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Digital light processing for the fabrication of 3D intrinsically conductive polymer structures
Andrew T. Cullen et al.
SYNTHETIC METALS (2018)
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
M. F. Arif et al.
MATERIALS & DESIGN (2018)
Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
Nahal Aliheidari et al.
MATERIALS & DESIGN (2018)
Enhanced Bonding via Additive Manufacturing-Enabled Surface Tailoring of 3D Printed Continuous-Fiber Composites
Edem Dugbenoo et al.
ADVANCED ENGINEERING MATERIALS (2018)
Polyvinyl alcohol incorporated buckypaper composites for improved multifunctional performance
Shashikant P. Patole et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Additive manufacturing-enabled shape transformations via FFF 4D printing
Abishera Ravichandra Rajkumar et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Stress Reduction of 3D Printed Compliance-Tailored Multilayers
Shanmugam Kumar et al.
ADVANCED ENGINEERING MATERIALS (2018)
Industrial and Consumer Uses of Additive Manufacturing A Discussion of Capabilities, Trajectories, and Challenges
Haden Edward Quinlan et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
Chuncheng Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
S. Berretta et al.
POLYMER TESTING (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
The impact of print orientation and raster pattern on fracture toughness in additively manufactured ABS
Tait D. McLouth et al.
ADDITIVE MANUFACTURING (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
Fundamentals and applications of 3D printing for novel materials
Jian-Yuan Lee et al.
APPLIED MATERIALS TODAY (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
3D Stereolithography of Polymer Composites Reinforced with Orientated Nanoclay
H. Eng et al.
ICMAT 2017 SYMPOSIUM (M TO Z) (2017)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
A novel approach to improve mechanical properties of parts fabricated by fused deposition modeling
Jianlei Wang et al.
MATERIALS & DESIGN (2016)
3D Printed Block Copolymer Nanostructures
Vincent F. Scalfani et al.
JOURNAL OF CHEMICAL EDUCATION (2015)
A 3D-printed, functionally graded soft robot powered by combustion
Nicholas W. Bartlett et al.
SCIENCE (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Three-Dimensional Printing of Complex Structures: Man Made or toward Nature?
Dong Lin et al.
ACS NANO (2014)
3D Printed Quantum Dot Light-Emitting Diodes
Yong Lin Kong et al.
NANO LETTERS (2014)
Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
B. M. Tymrak et al.
MATERIALS & DESIGN (2014)
Part strength evolution with bonding between filaments in fused deposition modelling This paper studies how coalescence of filaments contributes to the strength of final FDM part
Pavan Kumar Gurrala et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2014)
Post-yield crack toughness behavior of polyamide-6/polypropylene grafted maleic anhydride/nanoclay ternary nanocomposites
Naresh Dayma et al.
MATERIALS & DESIGN (2013)
Evaluation of fracture toughness of ABS polymers via the essential work of fracture (EWF) method
M. Mehrabi Mazidi et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2010)
The Essential Work of Fracture (EWF) method - Analyzing the Post-Yielding Fracture Mechanics of polymers
A. B. Martinez et al.
ENGINEERING FAILURE ANALYSIS (2009)
An Investigation of Failure Criterion for New Orthotropic Ceramic Matrix Composite Materials
Hsien-Yang Yeh et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2008)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Progressive damage modeling in fiber-reinforced materials
Ireneusz Lapczyk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Essential work of fracture (EWF) analysis for polypropylene grafted with maleic anhydride modified polypropylene/calcium carbonate composites
G Gong et al.
POLYMER TESTING (2005)
Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends
KH Tan et al.
BIOMATERIALS (2003)
The application of the essential work of fracture methodology to the plane strain fracture of ABS 3-point bend specimens
P Luna et al.
POLYMER (2003)
Mechanical characterization of parts fabricated using fused deposition modeling
A Bellini et al.
RAPID PROTOTYPING JOURNAL (2003)
Characterisation of injected EPBC plaques using the essential work of fracture (EWF) method
ML Maspoch et al.
POLYMER (2002)
Effect of layer orientation on mechanical properties of rapid prototyped samples
OS Es-Said et al.
MATERIALS AND MANUFACTURING PROCESSES (2000)