Remediation of artificially contaminated soil and groundwater with copper using hydroxyapatite/calcium silicate hydrate recovered from phosphorus-rich wastewater

Excessive copper (Cu) in contaminated soil and groundwater has attracted continuous attentions due to the bioaccumulation and durability. In this study, the feasibility of remediation of heavy metal pollution in soil and groundwater was investigated using hydroxyapatite/calcium silicate hydrate (HAP/C-S-H) recovered from phosphorus-rich wastewater in farmland. The results show that the pH has a strong effect on copper removal from Cu-contaminated groundwater but the impact of ion strength on the removal is weak. In general, high pH and low ion strength give better results in copper removal. Kinetic and isotherm data from the study fit well with Pseudo-second-order kinetic model and Langmuir isotherm model, respectively. The maximum adsorption capacity of HAP/C-S-H (138 mg/g) was higher than that of C-S-H (90.3 mg/g) when pH value, temperature, and ionic strength were 5, 308 K, and 0.01 M, respectively. Thermodynamics results indicate that Cu removal is a spontaneous and endo-thermic process. X-ray diffraction (XRD) results show that the mechanism of copper removal involves physical adsorption, chemical precipitation and ion exchange. For the remediation of Cu-contaminated soil, 76.3% of leachable copper was immobilized by HAP/C-S-H after 28 d. Acid soluble Cu, the main contributor to biotoxicity, decreased significantly while reducible and residual Cu increased. After immobilization, the acid neutralization capacity of the soil increased and the dissolution of copper was substantially reduced in near-neutral pH. It can be concluded that HAP/C-S-H is an effective, low-cost and eco-friendly reagent for in-situ remediation of heavy metal polluted soil and groundwater. (C) 2020 Elsevier Ltd. All rights reserved.

Automated summary

The study investigated the feasibility of using HAP/C-S-H for the remediation of heavy metal pollution in soil and groundwater, showing that high pH and low ion strength are beneficial for copper removal. The maximum adsorption capacity of HAP/C-S-H was found to be higher than that of C-S-H, and the dissolution of copper was significantly reduced at near-neutral pH.