Related references
Note: Only part of the references are listed.Microstructural design and thermal characterization of composite diatomite-vermiculite paraffin-based form-stable PCM for cementitious mortars
Jose Airton Cunha Costa et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Low cost and eco-friendly wood fiber-based composite phase change material: Development, characterization and lab-scale thermoregulation performance for thermal energy storage
Ahmet Sari et al.
ENERGY (2020)
Form-Stabilized Polyethylene Glycol/Palygorskite Composite Phase Change Material: Thermal Energy Storage Properties, Cycling Stability, and Thermal Durability
Ahmet Sari et al.
POLYMER ENGINEERING AND SCIENCE (2020)
Incorporation of phase change material and carbon nanofibers into lightweight aggregate concrete for thermal energy regulation in buildings
Miao Ren et al.
ENERGY (2020)
Improvement of thermal inertia effect in buildings using shape stabilized PCM wallboard based on the enthalpy-temperature function
Seunghwan Wi et al.
SUSTAINABLE CITIES AND SOCIETY (2020)
Study of a novel ceramsite-based shape-stabilized composite phase change material (PCM) for energy conservation in buildings
Yingying Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
A novel form stable PCM based bio composite material for solar thermal energy storage applications
Dudul Das et al.
JOURNAL OF ENERGY STORAGE (2020)
Effect of pre-treatment methods on natural raw materials-based phase change material composites for building applications
Yeliz Konuklu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Thermal properties of composite organic phase change materials (PCMs): A critical review on their engineering chemistry
Dimberu G. Atinafu et al.
APPLIED THERMAL ENGINEERING (2020)
Thermal performance of a solar energy storage concrete panel incorporating phase change material aggregates developed for thermal regulation in buildings
Sarra Drissi et al.
RENEWABLE ENERGY (2020)
Low-cost, shape-stabilized fly ash composite phase change material synthesized by using a facile process for building energy efficiency
Lei Liu et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Preparation, characterization, thermal energy storage properties and temperature control performance of form-stabilized sepiolite based composite phase change materials
Ahmet Sari et al.
ENERGY AND BUILDINGS (2019)
Development of pentadecane/diatomite and pentadecane/sepiolite nanocomposites fabricated by different compounding methods for thermal energy storage
Yeliz Konuklu et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)
Energetic and exergetic performance evaluation of a solar cooling and heating system assisted with thermal storage
Barbara Mendecka et al.
ENERGY (2019)
Investigation of thermal properties and enhanced energy storage/release performance of silica fume/myristic acid composite doped with carbon nanotubes
Ahmet Sari et al.
RENEWABLE ENERGY (2019)
Potential of macroencapsulated PCM for thermal energy storage in buildings: A comprehensive review
Pushpendra Kumar Singh Rathore et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effects of carbon nanotubes additive on thermal conductivity and thermal energy storage properties of a novel composite phase change material
Ahmet Sari et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Elaboration and properties of a composite bio-based PCM for an application in building envelopes
Lisa Boussaba et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Octadecane/C-decorated diatomite composite phase change material with enhanced thermal conductivity as aggregate for developing structural-functional integrated cement for thermal energy storage
Tingting Qian et al.
ENERGY (2018)
Preparation, characterization and thermal regulation performance of cement based-composite phase change material
Ahmet Sari et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Laboratory assessment of residential building walls containing pipe-encapsulated phase change materials for thermal management
Xiaoqin Sun et al.
ENERGY (2018)
Evaluation of a novel solar driven sorption cooling/heating system integrated with PCM storage compartment
Mohammadreza Behi et al.
ENERGY (2018)
Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials
Yaxue Lin et al.
ENERGY (2018)
Experimental study on thermal performance of phase change material passive and active combined using for building application in winter
Xiangfei Kong et al.
APPLIED ENERGY (2017)
The role of synthesis parameters on the workability, setting and strength properties of binary binder based geopolymer paste
Sajad Yaseri et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Thermal energy storage enhancement of lightweight cement mortars with the application of phase change materials
Sayanthan Ramakrishnan et al.
INTERNATIONAL HIGH-PERFORMANCE BUILT ENVIRONMENT CONFERENCE - A SUSTAINABLE BUILT ENVIRONMENT CONFERENCE 2016 SERIES (SBE16), IHBE 2016 (2017)
Partial substitution of silica fume with fine glass powder in UHPC: Filling the micro gap
N. A. Soliman et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Preparation and thermal characteristics of eutectic fatty acids/Shorea javanica composite for thermal energy storage
Hadi Fauzi et al.
APPLIED THERMAL ENGINEERING (2016)
Preparation and characterization of sepiolite-based phase change material nanocomposites for thermal energy storage
Yeliz Konuklu et al.
APPLIED THERMAL ENGINEERING (2016)
Influence of adding phase change materials on the physical and mechanical properties of cement mortars
Sandra Cunha et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Development and thermal performance of pumice/organic PCM/gypsum composite plasters for thermal energy storage in buildings
Ali Karaipekli et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Building Energy Storage Panel Based on Paraffin/Expanded Perlite: Preparation and Thermal Performance Study
Xiangfei Kong et al.
MATERIALS (2016)
Effects of the form-stable expanded perlite/paraffin composite on cement manufactured by extrusion technique
Zeyu Lu et al.
ENERGY (2015)
Thermal cycle test of binary mixtures of some fatty acids as phase change materials for building applications
Atul Sharma et al.
ENERGY AND BUILDINGS (2015)
Review on using microencapsulated phase change materials (PCM) in building applications
Yeliz Konuklu et al.
ENERGY AND BUILDINGS (2015)
Application of phase change materials to improve the thermal performance of cementitious material
Naser P. Sharifi et al.
ENERGY AND BUILDINGS (2015)
Study on functional and mechanical properties of cement mortar with graphite-modified microencapsulated phase-change materials
Hongzhi Cui et al.
ENERGY AND BUILDINGS (2015)
Energy efficient Bio-based PCM with silica fume composites to apply in concrete for energy saving in buildings
Yujin Kang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Preparation, Mechanical and Thermal Properties of Cement Board with Expanded Perlite Based Composite Phase Change Material for Improving Buildings Thermal Behavior
Rongda Ye et al.
MATERIALS (2015)
Thermo-physical stability of fatty acid eutectic mixtures subjected to accelerated aging for thermal energy storage (TES) application
Hadi Fauzi et al.
APPLIED THERMAL ENGINEERING (2014)
Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites
Biwan Xu et al.
ENERGY (2014)
Simulation of a ventilated cavity to enhance the effectiveness of PCM wallboards for summer thermal comfort in buildings
G. Evola et al.
ENERGY AND BUILDINGS (2014)
Heat storage properties of the cement mortar incorporated with composite phase change material
Min Li et al.
APPLIED ENERGY (2013)
Preparation, characterization and thermal properties of Lauryl alcohol/Kaolin as novel form-stable composite phase change material for thermal energy storage in buildings
Shazim Ali Memon et al.
APPLIED THERMAL ENGINEERING (2013)
Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete
Su-Gwang Jeong et al.
ENERGY AND BUILDINGS (2013)
Optimal preparation of PCM/diatomite composites for enhancing thermal properties
Su-Gwang Jeong et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material
Zhengguo Zhang et al.
RENEWABLE ENERGY (2013)
Use of microencapsulated PCM in buildings and the effect of adding awnings
Pablo Arce et al.
ENERGY AND BUILDINGS (2012)
Preparation and thermal performance of gypsum boards incorporated with microencapsulated phase change materials for thermal regulation
Huanzhi Zhang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Comparison of methods for arresting hydration of cement
Jie Zhang et al.
CEMENT AND CONCRETE RESEARCH (2011)
Hydration characteristics of hydrothermal treated cement kiln dust-sludge-silica fume pastes
M. S. Amin et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Stearic acid/silica fume composite as form-stable phase change material for thermal energy storage
Yi Wang et al.
ENERGY AND BUILDINGS (2011)
Review on thermal energy storage with phase change materials and applications
Atul Sharma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
Effect of silica fume on mechanical properties of high-strength concrete
M Mazloom et al.
CEMENT & CONCRETE COMPOSITES (2004)
Control aspects of latent heat storage and recovery in concrete
T Lee et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2000)
Share Paper
