Related references
Note: Only part of the references are listed.Clean and low-alkalinity one-part geopolymeric cement: Effects of sodium sulfate on microstructure and properties
Cong Ma et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Effect of curing condition and carbonization enhancement on mechanical properties of fly ash -desulfurization gypsum - steel slag blocks
Siyu Duan et al.
JOURNAL OF CO2 UTILIZATION (2020)
Mix design and mechanical properties of geopolymer and alkali activated concrete: Review of the state-of-the-art and the development of a new unified approach
Tianyu Xie et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Sustainable alkaline activation of fly ash, aluminium anodising sludge and glass powder blends with a recycled alkaline cleaning solution
Nuno Cristelo et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Chemico-microstructural changes in earthen building materials containing calcium carbide residue and rice husk ash
Philbert Nshimiyimana et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Pozzolanic reaction on alkali-activated Class F fly ash for ambient condition curable structural materials
Sung-Hoon Kang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mix composition and characterisation of one-part geopolymers with different activators
Mahya Askarian et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Investigation into the effect of calcium on the existence form of geopolymerized gel product of fly ash based geopolymers
Xianhui Zhao et al.
CEMENT & CONCRETE COMPOSITES (2019)
Strength development and durability of alkali-activated fly ash mortar with calcium carbide residue as additive
Sakonwan Hanjitsuwan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Sustainable alkali activated materials: Precursor and activator derived from industrial wastes
Ana Fernandez-Jimenez et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Mechanical and microstructural characterization of alkali sulfate activated high volume fly ash binders
Akash Dakhane et al.
MATERIALS & DESIGN (2017)
Compressive strength and microstructure of fly ash based geopolymer blended with silica fume under thermal cycle
Ping Duan et al.
CEMENT & CONCRETE COMPOSITES (2017)
Comparative study using Portland cement and calcium carbide residue as a promoter in bottom ash geopolymer mortar
Sakonwan Hanjitsuwan et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effect of fly ash characteristics on delayed high-strength development of geopolymers
J. G. Jang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Development of greener alkali-activated cement: utilisation of sodium carbonate for activating slag and fly ash mixtures
Ahmed F. Abdalqader et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Influence of silica fume on the microstructure of cement pastes: New insights from H-1 NMR relaxometry
A. C. A. Muller et al.
CEMENT AND CONCRETE RESEARCH (2015)
Sodium silicate-free geopolymers as coating materials: Effects of Na/Al and water/solid ratios on adhesion strength
M. Irfan Khan et al.
CERAMICS INTERNATIONAL (2015)
Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration
C. D. Atis et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Influence of coal ash properties on compressive behaviour of FA- and BA-based GPC
Tianyu Xie et al.
MAGAZINE OF CONCRETE RESEARCH (2015)
Strength and resistance to sulfate and sulfuric acid of ground fluidized bed combustion fly ash-silica fume alkali-activated composite
Prinya Chindaprasirt et al.
ADVANCED POWDER TECHNOLOGY (2014)
Strength of sustainable non-bearing masonry units manufactured from calcium carbide residue and fly ash
Suksun Horpibulsuk et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Life cycle assessment of caustic soda production: a case study in China
Jinglan Hong et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Bayer-geopolymers: An exploration of synergy between the alumina and geopolymer industries
Arie van Riessen et al.
CEMENT & CONCRETE COMPOSITES (2013)
Geopolymer synthetized from bottom coal ash and calcined paper sludge
Rozineide A. Antunes Boca Santa et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Engineering Properties of Silty Clay Stabilized with Calcium Carbide Residue
Apichit Kampala et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)
Strength, water permeability, and heat evolution of high strength concrete made from the mixture of calcium carbide residue and fly ash
Kittiphong Amnadnua et al.
MATERIALS & DESIGN (2013)
Use of calcium carbide residue and bagasse ash mixtures as a new cementitious material in concrete
Chaiyanunt Rattanashotinunt et al.
MATERIALS & DESIGN (2013)
Systematic study on the basic characteristics of alkali-activated slag-fly ash cementitious material system
Luo Xin et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Soil Stabilization by Calcium Carbide Residue and Fly Ash
Suksun Horpibulsuk et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Utilization of silica fume in concrete: Review of hardened properties
Rafat Siddique
RESOURCES CONSERVATION AND RECYCLING (2011)
Effect of alkalis on fresh C-S-H gels. FTIR analysis
I. Garcia Lodeiro et al.
CEMENT AND CONCRETE RESEARCH (2009)
Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers
Dimitrios Panias et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)
(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement
I. Lecomte et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)
The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation
CK Yip et al.
CEMENT AND CONCRETE RESEARCH (2005)
Share Paper
