Related references
Note: Only part of the references are listed.Optimization and analysis of process parameters for flank wear, cutting forces and vibration in turning of AISI 5140: A comprehensive study
Abdullah Aslan
MEASUREMENT (2020)
Optimization and Analysis of Surface Roughness, Flank Wear and 5 Different Sensorial Data via Tool Condition Monitoring System in Turning of AISI 5140
Mustafa Kuntoglu et al.
SENSORS (2020)
Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel
Mustafa Kuntoglu et al.
MATERIALS (2020)
Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
Emin Salur et al.
COMPOSITES PART B-ENGINEERING (2019)
Investigation of progressive tool wear for determining of optimized machining parameters in turning
Mustafa Kuntoglu et al.
MEASUREMENT (2019)
Effect of inorganic nanofillers on the impact behavior and fracture probability of industrial high-density polyethylene nanocomposite
Harun Sepet et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
Hydrostatic and blast initiated implosion of environmentally degraded Carbon-Epoxy composite cylinders
Carlos Javier et al.
COMPOSITE STRUCTURES (2018)
Seawater ageing of glass fiber reinforced epoxy nanocomposites based on silylated clays
Bikramjit Sharma et al.
POLYMER DEGRADATION AND STABILITY (2018)
Effect of Aging Process in Different Solutions on Kenaf Fibre Structure and Its Interfacial Adhesion in Epoxy Composites
A. Shalwan et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2018)
Effects of water, alkali solution and temperature ageing on water absorption, morphology and mechanical properties of natural FRP composites: Plant based jute vs. mineral-based basalt
Gao Ma et al.
COMPOSITES PART B-ENGINEERING (2018)
Influence of Thickness and Lateral Size of Graphene Nanoplatelets on Water Uptake in Epoxy/Graphene Nanocomposites
Silvia G. Prolongo et al.
APPLIED SCIENCES-BASEL (2018)
Microstructural reorganization in model epoxy network during cyclic hygrothermal ageing
G. Bouvet et al.
POLYMER (2017)
Effect of carbon nano-filler addition on the degradation of epoxy adhesive joints subjected to hygrothermal aging
Panta Jojibabu et al.
POLYMER DEGRADATION AND STABILITY (2017)
Origin of epoxies embrittlement during oxidative ageing
Esteve Ernault et al.
POLYMER TESTING (2017)
Influence of cryogenic treatment on mechanical and interfacial properties of carbon nanotube fiber/bisphenol-F epoxy composite
Yiqin Shao et al.
COMPOSITES PART B-ENGINEERING (2017)
Hygrothermal ageing behaviour of a glass/epoxy composite used in wind turbine blades
I. B. C. M. Rocha et al.
COMPOSITE STRUCTURES (2017)
Monitoring of seawater immersion degradation in glass fibre reinforced polymer composites using quantum dots
Yuan Fang et al.
COMPOSITES PART B-ENGINEERING (2017)
Accelerated aging effects on carbon fiber/epoxy composites
Ana P. Cysne Barbosa et al.
COMPOSITES PART B-ENGINEERING (2017)
Accelerated thermal ageing of epoxy resin and 3-D carbon fiber/epoxy braided composites
Man Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Hot-cured epoxy-nanoparticulate-filled nanocomposites: Fracture toughness behavior
F. Ghadami et al.
ENGINEERING FRACTURE MECHANICS (2016)
Determination of the mechanical, thermal and physical properties of nano-CaCO3 filled high-density polyethylene nanocomposites produced in an industrial scale
Harun Sepet et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Investigation of mechanical, thermal and surface properties of nanoclay/HDPE nanocomposites produced industrially by melt mixing approach
Harun Sepet et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Effects of the media and ageing condition on the tensile properties and fracture toughness of epoxy resin
Sugiman Sugiman et al.
POLYMER DEGRADATION AND STABILITY (2016)
Effect of side-wall functionalisation of multi-walled carbon nanotubes on the thermo-mechanical properties of epoxy composites
Raneesh Konnola et al.
RSC ADVANCES (2016)
Effect of Sea Water and Natural Ageing on Residual Strength of Epoxy Laminates, Reinforced with Glass and Carbon Woven Fabrics
Andrzej Komorek et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2016)
Effect of CNTs debonding on mode I fracture toughness of polymeric nanocomposites
M. M. Shokrieh et al.
MATERIALS & DESIGN (2016)
Characterization of sea water ageing effects on mechanical properties of carbon/epoxy composites for tidal turbine blades
N. Tual et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Durability study of pultruded CFRP plates immersed in water and seawater under sustained bending: Water uptake and effects on the mechanical properties
Innocent Kafodya et al.
COMPOSITES PART B-ENGINEERING (2015)
Effect of water, seawater and alkaline solution ageing on mechanical properties of flax fabric/epoxy composites used for civil engineering applications
Libo Yan et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Synthesis and application of epoxy resins: A review
Fan-Long Jin et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)
Fracture toughness of hydrothermally aged epoxy systems with different crosslink density
Sabina Alessi et al.
XXIII ITALIAN GROUP OF FRACTURE MEETING, IGFXXIII (2015)
Quantitative Analysis of Curing Mechanisms of Epoxy Resin by Mid- and Near-Fourier Transform Infra Red Spectroscopy
Sagar T. Cholake et al.
DEFENCE SCIENCE JOURNAL (2014)
Lap Shear Strength and Thermal Stability of Diglycidyl Ether of Bisphenol A/ Epoxy Novolac Adhesives with Nanoreinforcing Fillers
Mohammad Mansourian-Tabaei et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Environmental Effects on Mechanical Properties of Glass-Epoxy Composites
Ramazan Karakuzu et al.
MATERIALS TESTING (2014)
Rapid evaluation of thermal aging of a carbon fiber laminated epoxy composite
Wei Fan et al.
POLYMER COMPOSITES (2014)
Epoxy functionalized multi-walled carbon nanotubes for improved adhesives
Stefanie A. Sydlik et al.
CARBON (2013)
Failure pressure and impact response of glass-epoxy pipes exposed to seawater
Mehmet Emin Deniz et al.
COMPOSITES PART B-ENGINEERING (2013)
Environmental effect on fatigue life of glass-epoxy composite pipes subjected to impact loading
Mehmet Emin Deniz et al.
COMPOSITES PART B-ENGINEERING (2013)
The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites
Song Hee Han et al.
COMPOSITES PART B-ENGINEERING (2013)
A study of the impact of humid aging on the strength of industrial adhesive joints
R. Leger et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Corrosion inhibition effectiveness of zeolite ZSM-5 coating on mild steel against various organic acids and its antimicrobial activity
Mayuri N. Katariya et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)
Characteristics of natural rubber hybrid composites based on marble sludge/carbon black and marble sludge/rice husk derived silica
Khalil Ahmed et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)
Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines
Md Shamsuddoha et al.
MATERIALS & DESIGN (2013)
The influence of ions on water transport in nylon 6 films
N. J. W. Reuvers et al.
POLYMER (2013)
Protection of epoxy coatings containing polyaniline modified ultra-short glass fibers
Yongsheng Hao et al.
PROGRESS IN ORGANIC COATINGS (2013)
Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites
S. Chatterjee et al.
CARBON (2012)
Kinetics and isotherm studies of methylene blue adsorption onto polyaniline nanotubes base/silica composite
Mohamad M. Ayad et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2012)
Photooxidation of polymers: Relating material properties to chemical changes
J. -F. Larche et al.
POLYMER DEGRADATION AND STABILITY (2012)
Anticorrosion properties of smart coating based on polyaniline nanoparticles/epoxy-ester system
Reza Arefinia et al.
PROGRESS IN ORGANIC COATINGS (2012)
Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes
Long-cheng Tang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Degradation of basalt fibre and glass fibre/epoxy resin composites in seawater
Bin Wei et al.
CORROSION SCIENCE (2011)
Effect of carbon nanotubes on the strength of adhesive lap joints of C/C and C/C-SiC ceramic fibre composites
V. K. Srivastava
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)
Accelerated ageing due to moisture absorption of thermally cured epoxy resin/polyethersulphone blends. Thermal, mechanical and morphological behaviour
S. Alessi et al.
POLYMER DEGRADATION AND STABILITY (2011)
Thermal-oxidative aging of DGEBA/EPN/LMPA epoxy system: Chemical structure and thermal-mechanical properties
Yan-min Pei et al.
POLYMER DEGRADATION AND STABILITY (2011)
Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol-gel epoxy system
M. May et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2010)
Effects of harsh weather and seawater on glass fiber reinforced epoxy composite
N. Merah et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Tensile behavior contrast of basalt and glass fibers after chemical treatment
Bin Wei et al.
MATERIALS & DESIGN (2010)
Investigation of water absorption in clay-reinforced polypropylene nanocomposites
Aouatef Ladhari et al.
POLYMER DEGRADATION AND STABILITY (2010)
Epoxy coating destruction as a result of sulphuric acid aqueous solution action
Danuta Kotnarowska
PROGRESS IN ORGANIC COATINGS (2010)
Application of natural fiber reinforced composites to trenchless rehabilitation of underground pipes
Ha Na Yu et al.
COMPOSITE STRUCTURES (2008)
Fabrication of shape-controllable polyaniline micro/nanostructures on organic polymer surfaces: Obtaining spherical particles, wires, and ribbons
Wenbin Zhong et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2007)
Accelerated aging versus realistic aging in aerospace composite materials. II. Chemistry of thermal aging in a structural composite
B. Dao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
The effect of nanoparticles on the adhesion of epoxy adhesive
Lanlan Zhai et al.
MATERIALS LETTERS (2006)
Epoxy nanocomposites - fracture and toughening mechanisms
Bernd Wetzel et al.
ENGINEERING FRACTURE MECHANICS (2006)
Effects of hygrothennal aging on epoxy-based anisotropic conductive film
Y. C. Lin et al.
MATERIALS LETTERS (2006)
Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites - A comparative study
FH Gojny et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Fourier transform IR and differential scanning calorimetry study of curing of trifunctional amino-epoxy resin
F Carrasco et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Toughening structural adhesives via nano- and micro-phase inclusions
AJ Kinloch et al.
JOURNAL OF ADHESION (2003)
Oxidation induced shrinkage for thermally aged epoxy networks
J Decelle et al.
POLYMER DEGRADATION AND STABILITY (2003)
Low-temperature hygrothermal degradation of ambient cured E-glass/vinylester composites
VM Karbhari et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Hygrothermal diffusion behavior in bismaleimide resin
YM Li et al.
POLYMER (2001)
Accelerated ageing of organic coating systems by thermal treatment
A Miszczyk et al.
CORROSION SCIENCE (2001)
Accelerated testing of plain and epoxy-coated reinforcement in simulated seawater and chloride solutions
S Erdogdu et al.
CEMENT AND CONCRETE RESEARCH (2001)