Related references
Note: Only part of the references are listed.Stretchable strain sensors based on polyaniline/thermoplastic polyurethane blends
Iqra Abdul Rashid et al.
POLYMER BULLETIN (2020)
Scalable and multifunctional carbon nanotube-based textile as distributed sensors for flow and cure monitoring
Hongbo Dai et al.
CARBON (2020)
Graphene-based wearable piezoresistive physical sensors
Qingbin Zheng et al.
MATERIALS TODAY (2020)
In situ-grown carbon nanotubes enhanced cement-based materials with multifunctionality
Mimi Zhan et al.
CEMENT & CONCRETE COMPOSITES (2020)
Highly Sensitive Graphene/Polydimethylsiloxane Composite Films near the Threshold Concentration with Biaxial Stretching
Anqi Liu et al.
POLYMERS (2020)
Processing and out-of-plane properties of composites with embedded graphene paper for EMI shielding applications
I. Ud Din et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Micro-flow sensor for continuous resin fluidity monitoring between fibers
Yongxi He et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Electrical characterization of carbon-based fibers and their application for sensing relaxation-induced piezoresistivity in polymer composites
A. Can-Ortiz et al.
CARBON (2019)
Real-time impact damage sensing and localization in composites through embedded aligned carbon nanotube sheets
Karim Aly et al.
COMPOSITES PART B-ENGINEERING (2019)
Polyaniline-NBR blends by in situ polymerization: application as stretchable strain sensors
Muhammad Shafiq Irfan et al.
SMART MATERIALS AND STRUCTURES (2019)
Highly conductive ultra-sensitive SWCNT-coated glass fiber reinforcements for laminate composites structural health monitoring
Lazaros Tzounis et al.
COMPOSITES PART B-ENGINEERING (2019)
Carbon nanomaterials enabled fiber sensors: A structure-oriented strategy for highly sensitive and versatile in situ monitoring of composite curing process
Sida Luo et al.
COMPOSITES PART B-ENGINEERING (2019)
Piezoresistive Response of Spray-coated Multiwalled Carbon Nanotube/Glass Fiber/Epoxy Composites under Flexural Loading
J. A. Rodriguez-Gonzalez et al.
FIBERS AND POLYMERS (2019)
Hollow-structured MXene-PDMS composites as flexible, wearable and highly bendable sensors with wide working range
Dekui Song et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Multifunctional Skin-Inspired Flexible Sensor Systems for Wearable Electronics
Kaichen Xu et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Temperature Dependent Strain/Damage Monitoring of Glass/Epoxy Composites with Graphene as a Piezoresistive Interphase
Haroon Mahmood et al.
FIBERS (2019)
Hybrid spray-coating, laser-scribing and ink-dispensing of graphene sensors/arrays with tunable piezoresistivity for in situ monitoring of composites
Sida Luo et al.
CARBON (2018)
Structure dependent properties of carbon nanomaterials enabled fiber sensors for in situ monitoring of composites
Guantao Wang et al.
COMPOSITE STRUCTURES (2018)
Electrical resistance change vs damage state in cracked symmetric laminates: A closed form solution
Francesco Panozzo et al.
COMPOSITE STRUCTURES (2018)
Mechanical properties and strain monitoring of glass-epoxy composites with graphene-coated fibers
Haroon Mahmood et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
In-situ monitoring of woven glass fiber reinforced composites under flexural loading through embedded aligned carbon nanotube sheets
Karim Aly et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
Real time monitoring of the curing degree and the manufacturing process of fiber reinforced composites with a carbon nanotube buckypaper sensor
Shaowei Lu et al.
RSC ADVANCES (2018)
Carbon Nanomaterials Based Smart Fabrics with Selectable Characteristics for In-Line Monitoring of High-Performance Composites
Guantao Wang et al.
MATERIALS (2018)
Influence of seawater ageing on the mechanical and damage self-sensing capability of glass fiber-MWCNT/epoxy laminates subjected to flexural loading by means of the electrical resistance approach
J. A. Rodriguez-Gonzalez et al.
SMART MATERIALS AND STRUCTURES (2018)
Influence of the Hybrid Combination of Multiwalled Carbon Nanotubes and Graphene Oxide on Interlaminar Mechanical Properties of Carbon Fiber/Epoxy Laminates
J. A. Rodriguez-Gonzalez et al.
APPLIED COMPOSITE MATERIALS (2018)
Graphene coated piezo-resistive fabrics for liquid composite molding process monitoring
Muhammad A. Ali et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Design of Electrically Conductive Structural Composites by Modulating Aligned CVD-Grown Carbon Nanotube Length on Glass Fibers
Delong He et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Carbon nanotubes grown on carbon fiber yarns by a low temperature CVD method: A significant enhancement of the interfacial adhesion between carbon fiber/epoxy matrix hierarchical composites
Marcos Felisberto et al.
COMPOSITES COMMUNICATIONS (2017)
A Comparative Study on the Textile Processing of Carbon and Multifunctional Glass Fiber Sensor Yarns for Structural Health Monitoring
Niclas Wiegand et al.
ADVANCED ENGINEERING MATERIALS (2016)
In situ process monitoring of hierarchical micro-/nano-composites using percolated carbon nanotube networks
Joel Renaud Ngouanom Gnidakouong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Comparative study on monitoring structural damage in fiber-reinforced polymers using glass fibers with carbon nanotubes and graphene coating
Bin Hao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
A Novel Methodology for Spatial Damage Detection and Imaging Using a Distributed Carbon Nanotube-Based Composite Sensor Combined with Electrical Impedance Tomography
Hongbo Dai et al.
JOURNAL OF NONDESTRUCTIVE EVALUATION (2016)
CNT-grafted glass fibers as a smart tool for epoxy cure monitoring, UV-sensing and thermal energy harvesting in model composites
L. Tzounis et al.
RSC ADVANCES (2016)
A methodology to reduce variability during vacuum infusion with optimized design of distribution media
Hatice S. Sas et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg
Han Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Integrated Damage Sensing in Fibre-Reinforced Composites with Extremely Low Carbon Nanotube Loadings
Han Zhang et al.
JOURNAL OF NANOMATERIALS (2015)
Recent development in 2D materials beyond graphene
Ankur Gupta et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Processing and Characterization of a Novel Distributed Strain Sensor Using Carbon Nanotube-Based Nonwoven Composites
Hongbo Dai et al.
SENSORS (2015)
Easy Preparation of Self-Assembled High-Density Buckypaper with Enhanced Mechanical Properties
Jun Young Oh et al.
NANO LETTERS (2015)
Graphite Nanoplatelet Enabled Embeddable Fiber Sensor for in Situ Curing Monitoring and Structural Health Monitoring of Polymeric Composites
Sida Luo et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
SWCNT-thin-film-enabled fiber sensors for lifelong structural health monitoring of polymeric composites - From manufacturing to utilization to failure
Sida Luo et al.
CARBON (2014)
The interphase microstructure and electrical properties of glass fibers covalently and non-covalently bonded with multiwall carbon nanotubes
Lazaros Tzounis et al.
CARBON (2014)
Health monitoring of structural composites with embedded carbon nanotube coated glass fiber sensors
J. Sebastian et al.
CARBON (2014)
A Single Glass Fiber with Ultrathin Layer of Carbon Nanotube Networks Beneficial to In-Situ Monitoring of Polymer Properties in Composite Interphases
Jie Zhang et al.
SOFT MATERIALS (2014)
A methodology for flow-front estimation in LCM processes based on pressure sensors
Claudio Di Fratta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
The electrical response of carbon nanotube-based thin film sensors subjected to mechanical and environmental effects
Bryan R. Loyola et al.
SMART MATERIALS AND STRUCTURES (2013)
Out-of-autoclave cure cycle study of a resin film infusion process using in situ process monitoring
C. Garschke et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Cross-sectional monitoring of resin impregnation using an area-sensor array in an RIM process
Ryosuke Matsuzaki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Full-field monitoring of resin flow using an area-sensor array in a VaRTM process
Ryosuke Matsuzaki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Life cycle monitoring of large-scale CFRP VARTM structure by fiber-optic-based distributed sensing
Shu Minakuchi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Glass Fibers with Carbon Nanotube Networks as Multifunctional Sensors
Shang-lin Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Functional interphases with multi-walled carbon nanotubes in glass fibre/epoxy composites
Jie Zhang et al.
CARBON (2010)
Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites
Peng-Cheng Ma et al.
CARBON (2010)
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Peng-Cheng Ma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Health monitoring in continuous glass fibre reinforced thermoplastics: Tailored sensitivity and cyclic loading of CNT-based interphase sensors
J. Rausch et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Health monitoring in continuous glass fibre reinforced thermoplastics: Manufacturing and application of interphase sensors based on carbon nanotubes
J. Rausch et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Carbon nanotube-based hierarchical composites: a review
Hui Qian et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology (VERITy) process
Nitesh Gupta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
A grid of dielectric sensors to monitor mold filling and resin cure in resin transfer molding
Bekir Yenilmez et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Full field monitoring of the resin flow and laminate properties during the resin infusion process
Q. Govignon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Load and health monitoring in glass fibre reinforced composites with an electrically conductive nanocomposite epoxy matrix
Lars Boeger et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Fabrication and multifunctional properties of a hybrid laminate with aligned carbon nanotubes grown In Situ
Enrique J. Garcia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Correlations between percolation threshold, dispersion state, and aspect ratio of carbon nanotubes
Jing Li et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Effects of silane functionalization on the properties of carbon nanotube/epoxy nanocomposites
Peng Cheng Ma et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Percolation threshold of conducting polymer composites containing 3D randomly distributed graphite nanoplatelets
Jing Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Monitoring of resin flow in the resin transfer molding (RTM) process using point-voltage sensors
Murat Danisman et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Constraints on monitoring resin flow in the resin transfer molding (RTM) process by using thermocouple sensors
Goker Tuncol et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Functionalization of carbon nanotubes using a silane coupling agent
Peng Cheng Ma et al.
CARBON (2006)
Real time monitoring of cure and gelification of a thermoset matrix
V. Antonucci et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Viscoelastic response of dry and wet fibrous materials during infusion processes
PA Kelly et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Remote monitoring of resin transfer molding processes by distributed dielectric sensors
MC Hegg et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Process and performance evaluation of the vacuum-assisted process
W Li et al.
JOURNAL OF COMPOSITE MATERIALS (2004)
The implications of fiber compaction and saturation on fully coupled VARTM simulation
JA Acheson et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Flow monitoring in Liquid Composite Molding based on Linear Direct Current sensing technique
T Luthy et al.
POLYMER COMPOSITES (2003)
Dielectric cure monitoring for glass/polyester prepreg composites
HG Kim et al.
COMPOSITE STRUCTURES (2002)
Linear direct current sensing system for flow monitoring in Liquid Composite Moulding
T Luthy et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Ionic doping of low conductivity structural resins for improved direct current sensing
KM England et al.
JOURNAL OF COMPOSITE MATERIALS (2001)
Assessment of flow and cure monitoring using direct current and alternating current sensing in vacuum-assisted resin transfer molding
UK Vaidya et al.
SMART MATERIALS & STRUCTURES (2000)