Related references
Note: Only part of the references are listed.Validation of Puck's failure criterion for CFRP composites in the cryogenic regime
Joerg Hohe et al.
CEAS SPACE JOURNAL (2021)
Fatigue of fibre-reinforced plastics due to cryogenic thermal cycling
Caroline Lueders et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
An integrated macro/micro-scale approach for in situ evaluation of matrix cracking in the polymer matrix of cryogenic composite tanks
Ming-fa Ren et al.
COMPOSITE STRUCTURES (2019)
Cryogenic Compression Properties and Failure Mechanism of Lightweight 3D MWK Carbon Fabric Reinforced Epoxy Composites
Dian-sen Li et al.
FIBERS AND POLYMERS (2019)
Micromechanical matrix failure analysis for unidirectional fiber-reinforced composites
Xin Chang et al.
THIN-WALLED STRUCTURES (2019)
High performance epoxy-based composites for cryogenic use: A approach based on synergetic strengthening effects of epoxy grafted polyurethane and MWCNTs-NH2
Liying Jia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Simulation and measurement of cryogenic-interfacial-properties of T700/modified epoxy for composite cryotanks
Meiling Yan et al.
MATERIALS & DESIGN (2019)
Numerical and experimental evaluation of the formation of leakage paths through CFRP cross-ply laminates with leak barrier layers
Hitoshi Hamori et al.
COMPOSITE STRUCTURES (2019)
Evaluation of the mechanical performance of a composite multi-cell tank for cryogenic storage: Part II - Experimental assessment
Nias G. Tapeinos et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Evaluation of the mechanical performance of a composite multi-cell tank for cryogenic storage: Part I - Tank pressure window based on progressive failure analysis
Ilias G. Tapeinos et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Prediction on residual stresses of carbon/epoxy composite at cryogenic temperature
Lei Yang et al.
POLYMER COMPOSITES (2019)
Impact behavior of carbon fiber/epoxy composite tubes reinforced with multi-walled carbon nanotubes at cryogenic environment
Memduh Kara et al.
COMPOSITES PART B-ENGINEERING (2018)
Friction and wear behaviour of polymers in liquid hydrogen
Geraldine Theiler et al.
CRYOGENICS (2018)
World's largest-class flywheel energy storage system using superconducting magnetic bearings [News from Japan]
IEEE ELECTRICAL INSULATION MAGAZINE (2017)
Rotational moulding of PEEK polymer liners with carbon fibre/PEEK over tape-placement for space cryogenic fuel tanks
Brendan R. Murray et al.
MATERIALS & DESIGN (2017)
Cryogenic fracture behavior of epoxy reinforced by a novel graphene oxide/poly(p-phenylenediamine) hybrid
Abdelrahman Hussein et al.
COMPOSITES PART B-ENGINEERING (2017)
Permeability of carbon fibre PEEK composites for cryogenic storage tanks of future space launchers
M. Flanagan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Experimental study on the bending properties and failure mechanism of 3D multi-axial warp knitted composites at room and liquid nitrogen temperatures
Dian-sen Li et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Effects of low temperature on the mechanical properties of glass fibre-epoxy composites: static tension, compression, R=0.1 and R =-1 fatigue of ±45° laminates
Laurent Cormier et al.
WIND ENERGY (2016)
Mechanical Properties of Preliminary Designed Insulation for CFETR CSMC
Huan Jin et al.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2016)
A study on the required performance of a 2G HTS wire for HTS wind power generators
Hae-Jin Sung et al.
SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2016)
Interfacial evaluation of carbon fiber/epoxy composites using electrical resistance measurements at room and a cryogenic temperature
Dong-Jun Kwon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Damage and permeability in tape-laid thermoplastic composite cryogenic tanks
D. M. Grogan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Transverse cracking of cross-ply laminates: A computational micromechanics perspective
Miguel Herraez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Crack growth monitoring of CFRP composites loaded in different environmental conditions using acoustic emission method
Lenka Michalcova et al.
ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL (2015)
An XFEM-based methodology for fatigue delamination and permeability of composites
D. M. Grogan et al.
COMPOSITE STRUCTURES (2014)
Damage characterisation of cryogenically cycled carbon fibre/PEEK laminates
D. M. Grogan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Experimental investigation on the compression properties and failure mechanism of 3D braided composites at room and liquid nitrogen temperature
Dian-sen Li et al.
COMPOSITES PART B-ENGINEERING (2014)
The ITER Pre-Compression Rings - A First in Cryogenic Composite Technology
Hannu Rajainmaki et al.
ADVANCES IN CRYOGENIC ENGINEERING, VOL 60 (2014)
Cryogenic Interlaminar Fracture Properties of Woven Glass/Epoxy Composite Laminates Under Mixed-Mode I/III Loading Conditions
Masaya Miura et al.
APPLIED COMPOSITE MATERIALS (2013)
The effects of glass weave on the low temperature flexure properties of composite laminates
Madhu S. Madhukar et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
Three-dimensional stress analysis of cracked satin woven carbon fiber reinforced/polymer composites under tension at cryogenic temperatures
Tomo Takeda et al.
CRYOGENICS (2012)
Interlaminar fracture characterization of woven glass/epoxy composites under mixed-mode II/III loading conditions at cryogenic temperatures
Masaya Miura et al.
ENGINEERING FRACTURE MECHANICS (2012)
Cryogenic delamination growth in woven glass/epoxy composite laminates under mixed-mode I/II fatigue loading
Yasuhide Shindo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Mechanical characterization of glass fibre-epoxy composite material for ITER pre-compression rings
Fabio Crescenzi et al.
FUSION ENGINEERING AND DESIGN (2011)
Effect of damage on the interlaminar shear properties of hybrid composite laminates at cryogenic temperatures
Masaya Miura et al.
COMPOSITE STRUCTURES (2010)
Effect of Thermal Stresses on the Failure Criteria of Fiber Composites
Martin Leong et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2010)
Evaluation of mechanical properties of advanced polymers for composite cryotank applications
M. M. Pavlick et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures
Yasuhide Shindo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Mode III fatigue delamination growth of glass fiber reinforced polymer woven laminates at cryogenic temperatures
Masaya Miura et al.
CRYOGENICS (2009)
Structural Integrity of Glass/Polyester Composites at Liquid Nitrogen Temperature
M. Surendra Kumar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Microstructural and Mechanical Aspects of Carbon/Epoxy Composites at Liquid Nitrogen Temperature
M. Surendra Kumar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Prediction of stitch crack evolution and gas permeability in multidirectional composite laminates
Jianlong Xu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Mixed-mode interlaminar fracture and damage characterization in woven fabric-reinforced glass/epoxy composite laminates at cryogenic temperatures using the finite element and improved test methods
Yasuhide Shindo et al.
ENGINEERING FRACTURE MECHANICS (2008)
A micromechanical damage model for carbon fiber composites at reduced temperatures
Edward C. Peterson et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Damage analysis of a type 3 cryogenic propellant tank after LN2 storage test
Sang-Guk Kang et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
A continuum damage model for composite laminates:: Part I -: Constitutive model
P. Maimi et al.
MECHANICS OF MATERIALS (2007)
A continuum damage model for composite laminates:: Part II -: Computational implementation and validation
P. Maimi et al.
MECHANICS OF MATERIALS (2007)
An initial and progressive failure analysis for cryogenic composite fuel tank design
Jaehyung Ju et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Modeling of permeation and damage in graphite/epoxy laminates for cryogenic tanks in the presence of delaminations and stitch cracks
Abilash Nair et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Fracture toughness of transverse cracks in graphite/epoxy laminates at cryogenic conditions
Sukjoo Choi et al.
COMPOSITES PART B-ENGINEERING (2007)
Characterization and modeling of fracture and damage behavior of notched woven fabric GFRP laminates under three-point bending at cryogenic temperatures
Kazuaki Sanada et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Prediction of cryogen leak rate through damaged composite laminates
Pravin Peddiraju et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Evaluation of gas leakage through composite laminates with multilayer matrix cracks: Cracking angle effects
Tomohiro Yokozeki et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Residual stress and thermal expansion of graphite epoxy laminates subjected to cryogenic temperatures
Peter Ifju et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Facesheet delamination of composite sandwich materials at cryogenic temperatures
Thomas S. Gates et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Adhesion of glass/epoxy composites influenced by thermal and cryogenic environments
Bankim C. Ray
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Influence of stacking sequence on leakage characteristics through CFRP composite laminates
Hisashi Kumazawa et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Experimental and analytical studies on the damage initiation in composite laminates at cryogenic temperatures
Ran Y. Kim et al.
COMPOSITE STRUCTURES (2006)
Mode III interlaminar fracture behavior of glass fiber reinforced polymer woven laminates at 293 to 4 k
Victor Rizov et al.
APPLIED COMPOSITE MATERIALS (2006)
Mode I fatigue delamination growth in GFRP woven laminates at low temperatures
Yasuhide Shindo et al.
ENGINEERING FRACTURE MECHANICS (2006)
Micromechanical analysis of composite laminates at cryogenic temperatures
Sukjoo Choi et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
Characterization of Mode I fatigue crack growth in GFRP woven laminates at low temperatures
Y Shindo et al.
ACTA MATERIALIA (2005)
Designing of epoxy resin systems for cryogenic use
T Ueki et al.
CRYOGENICS (2005)
Tension-tension fatigue behavior of GFRP woven laminates at low temperatures
S Kumagai et al.
CRYOGENICS (2005)
Cryogenic/elevated temperature cycling induced leakage paths in PMCs
VT Bechel et al.
COMPOSITES PART B-ENGINEERING (2005)
Predictive modeling of microcracking in carbon-fiber/epoxy composites at cryogenic temperatures
JF Timmerman et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Three-dimensional thermoelastic analysis of cracked plain weave glass/epoxy composites at cryogenic temperatures
T Takeda et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Modeling of permeation and damage in graphite/epoxy laminates for cryogenic fuel storage
S Roy et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Low-temperature effects on E-glass/urethane at high strain rates
SJ Song et al.
AIAA JOURNAL (2004)
Experimental and analytical evaluation of the notched tensile fracture of CFRP-woven laminates at low temperatures
S Kumagai et al.
JOURNAL OF COMPOSITE MATERIALS (2004)
Matrix and fiber influences on the cryogenic microcracking of carbon fiber/epoxy composites
JF Timmerman et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Failure analysis of FRP laminates by means of physically based phenomenological models
A Puck et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Statistical analysis of the progression of transverse cracking and delamination in cross-ply laminates
JM Berthelot et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
Share Paper
