Related references
Note: Only part of the references are listed.Dynamic impact behavior of syntactic foam core sandwich composites
P. Breunig et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Effect of thermal loading on syntactic foam sandwich composite
Sunil Waddar et al.
POLYMER COMPOSITES (2020)
Experimental and analytical investigation of the bending behaviour of 3D-printed bio-based sandwich structures composites with auxetic core under cyclic fatigue tests
Khawla Essassi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Large amplitude vibration of sandwich plates with functionally graded auxetic 3D lattice core
Chong Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Mechanical behavior of 3D printed syntactic foam composites
H. S. Bharath et al.
COMPOSITE STRUCTURES (2020)
Dynamic mechanical analysis of 3D printed eco-friendly lightweight composite
Mrityunjay Doddamani
COMPOSITES COMMUNICATIONS (2020)
Three-Dimensional Printed Lightweight Composite Foams
H. S. Bharath et al.
ACS OMEGA (2020)
Chaotic oscillation of a multi-scale hybrid nano-composites reinforced disk under harmonic excitation via GDQM
M. S. H. Al-Furjan et al.
COMPOSITE STRUCTURES (2020)
Effect of wall thickness and cutting parameters on drilling of glass microballoon/epoxy syntactic foam composites
H. S. Ashrith et al.
COMPOSITE STRUCTURES (2019)
Additive Manufacturing of Three-Phase Syntactic Foams Containing Glass Microballoons and Air Pores
Ashish Kumar Singh et al.
JOM (2019)
Buckling and vibration behaviour of syntactic foam core sandwich beam with natural fiber composite facings under axial compressive loads
Sunil Waddar et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical and self-monitoring behaviors of 3D printing smart continuous carbon fiber-thermoplastic lattice truss sandwich structure
Zhenwei Wang et al.
COMPOSITES PART B-ENGINEERING (2019)
Eco-friendly lightweight filament synthesis and mechanical characterization of additively manufactured closed cell foams
Balu Patil et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Compressive behavior of fly ash based 3D printed syntactic foam composite
Balu Padl et al.
MATERIALS LETTERS (2019)
Effect of cenosphere filler surface treatment on the erosion behavior of epoxy matrix syntactic foams
Kiran Shahapurkar et al.
POLYMER COMPOSITES (2019)
Effect of arctic environment on flexural behavior of fly ash cenosphere reinforced epoxy syntactic foams
Carlos D. Garcia et al.
COMPOSITES PART B-ENGINEERING (2018)
Quasi-static compressive response of compression molded glass microballoon/HDPE syntactic foam
M. L. Jayavardhan et al.
COMPOSITES PART B-ENGINEERING (2018)
Hole Quality Assessment in Drilling of Glass Microballoon/Epoxy Syntactic Foams
H. S. Ashrith et al.
JOM (2018)
Influence of axial compressive loads on buckling and free vibration response of surface-modified fly ash cenosphere/epoxy syntactic foams
Sunil Waddar et al.
JOURNAL OF COMPOSITE MATERIALS (2018)
Polypropylene Filled With Glass Spheres in Extrusion-Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Crack monitoring and failure investigation on inkjet printed sandwich structures under quasi-static indentation test
Vishwesh Dikshit et al.
MATERIALS & DESIGN (2018)
3D printing of composite sandwich structures using continuous carbon fiber and fiber tension
Kentaro Sugiyama et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Influence of surface modification on wear behavior of fly ash cenosphere/epoxy syntactic foam
Kiran Shahapurkar et al.
WEAR (2018)
3D printed meta-sandwich structures: Failure mechanism, energy absorption and multi-hit capability
H. Yazdani Sarvestani et al.
MATERIALS & DESIGN (2018)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Development of glass microballoon/HDPE syntactic foams by compression molding
M. L. Jayavardhan et al.
COMPOSITES PART B-ENGINEERING (2017)
Bending behavior of sandwich composite structures with tunable 3D-printed core materials
Tiantian Li et al.
COMPOSITE STRUCTURES (2017)
Bending, buckling and free vibration of laminated composite and sandwich beams: A critical review of literature
Atteshamuddin S. Sayyad et al.
COMPOSITE STRUCTURES (2017)
Buckling and free vibration of shear-flexible sandwich beams using a couple-stress-based finite element
Bruno Reinaldo Goncalves et al.
COMPOSITE STRUCTURES (2017)
Experimental investigation on buckling and free vibration behavior of woven natural fiber fabric composite under axial compression
M. Rajesh et al.
COMPOSITE STRUCTURES (2017)
Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2016)
Effect of cenosphere surface treatment and blending method on the tensile properties of thermoplastic matrix syntactic foams
B. R. Bharath Kumar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Investigation for dimensional accuracy of AMC prepared by FDM assisted investment casting using nylon-6 waste based reinforced filament
Rupinder Singh et al.
MEASUREMENT (2016)
Processing of cenosphere/HDPE syntactic foams using an industrial scale polymer injection molding machine
B. R. Bharath Kumar et al.
MATERIALS & DESIGN (2016)
Large amplitude free vibration of axially loaded beams resting on variable elastic foundation
Alborz Mirzabeigy et al.
ALEXANDRIA ENGINEERING JOURNAL (2016)
Elastoplastic buckling and post-buckling analysis of sandwich columns
Philippe Le Grognec et al.
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2015)
Free Vibration and Buckling Analysis of Sandwich Beams with Functionally Graded Carbon Nanotube-Reinforced Composite Face Sheets
Helong Wu et al.
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2015)
Static and dynamic stability of an axially compressed five-layer sandwich beam
M. J. Smyczynski et al.
THIN-WALLED STRUCTURES (2015)
Elastic buckling of a sandwich beam with variable mechanical properties of the core
M. Grygorowicz et al.
THIN-WALLED STRUCTURES (2015)
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Miquel Domingo-Espin et al.
MATERIALS & DESIGN (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
A specific groove design for individualized healing in a canine partial sternal defect model by a polycaprolactone/hydroxyapatite scaffold coated with bone marrow stromal cells
Yiwen Xuan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)
Morphology, mechanical properties, and dimensional stability of wood particle/high density polyethylene composites: Effect of removal of wood cell wall composition
Rongxian Ou et al.
MATERIALS & DESIGN (2014)
Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
B. M. Tymrak et al.
MATERIALS & DESIGN (2014)
FDM 3D PRINTING TECHNOLOGY IN MANUFACTURING COMPOSITE ELEMENTS
P. Dudek
ARCHIVES OF METALLURGY AND MATERIALS (2013)
Metal matrix syntactic foams produced by pressure infiltration-The effect of infiltration parameters
Imre Norbert Orbulov
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Optimization of Sandwich Composites Fuselages Under Flight Loads
Chongxin Yuan et al.
APPLIED COMPOSITE MATERIALS (2012)
Compressive properties of aluminium matrix syntactic foams
Imre Norbert Orbulov
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Behavior of Sandwich Beams With Functionally Graded Rubber Core in Three Point Bending
M. R. Doddamani et al.
POLYMER COMPOSITES (2011)
Analysis of flexural properties of hollow-particle filled composites
G. Tagliavia et al.
COMPOSITES PART B-ENGINEERING (2010)
Mechanical and thermal characteristics of high density polyethylene-fly ash Cenospheres composites
M. V. Deepthi et al.
MATERIALS & DESIGN (2010)
Hollow glass microsphere HDPE composites for low energy sustainability
S. N. Patankar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Fused deposition modeling of patient-specific polymethylmethacrylate implants
David Espalin et al.
RAPID PROTOTYPING JOURNAL (2010)
Free vibration analysis of sandwich structures with a flexible functionally graded syntactic core
O. Rahmani et al.
COMPOSITE STRUCTURES (2009)
Interface engineering via compatibilization in HDPE composite reinforced with sodium borosilicate hollow glass microspheres
S. N. Patankar et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
New peel stopper concept for sandwich structures
J. Jakobsen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Effect of porosity on the damping properties of modified epoxy composites filled with fly ash
Jian Gu et al.
SCRIPTA MATERIALIA (2007)
Thermoplastic sandwich structure design and manufacturing for the body panel of mass transit vehicle
Haibin Ning et al.
COMPOSITE STRUCTURES (2007)
Comparison of compressive properties of layered syntactic foams having gradient in microballoon volume fraction and wall thickness
Nikhil Gupta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
Analytical and experimental study of free vibration response of soft-core sandwich beams
VS Sokolinsky et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2004)
Compression properties of syntactic foams: effect of cenosphere radius ratio and specimen aspect ratio
N Gupta et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Experimental characterization and numerical simulations of a syntactic-foam/glass-fibre composite sandwich
A Corigliano et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)