4.7 Article

Compression after high-velocity impact behavior of pseudo-elastic shape memory alloy embedded glass/epoxy composite laminates

Journal

COMPOSITE STRUCTURES
Volume 259, Issue -, Pages -

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.compstruct.2020.113519

Keywords

Pseudo-elastic shape memory alloys (PE-SMA); High-velocity impact; Digital image correlation (DIC); Compression after impact (CAI); Glass/epoxy; Composite laminates

Ask authors/readers for more resources

The CAI behavior of PE-SMA embedded glass/epoxy composite laminates manufactured via VARI technique was investigated experimentally after high-velocity impact. Results showed that anchored PE-SMA composites had a higher ballistic limit compared to homogeneous glass/epoxy composites, and the damage tolerance of PE-SMA based composites was better at 70 m/s but lower at higher velocities compared to homogeneous ones.
The compression after high-velocity impact (CAI) behavior of pseudo-elastic shape memory alloy (PE-SMA) embedded glass/epoxy composite laminates manufactured via vacuum-assisted resin infusion (VARI) technique was investigated experimentally. High-velocity impact tests were performed on the glass/epoxy composites using an in-house build gas-gun set-up at four different velocities (70, 85, 95, and 105 m/s). To elucidate, the series of damage events undergone on the composites under the high-velocity impact, a high-speed camera was used. Quasi-static compression-after-impact (CAI) tests were performed to evaluate the damage tolerance of different composites subjected to high-velocity impact. Real-time damage progression during the CAI as well as the extent of damage was characterized by using a 2D Digital Image Correlation (DIC) technique. Three different types of embedment configurations of PE-SMA wire, namely, with length variation (35, 70, and 150 mm) and also with and without anchors, were used. The impact test results show that the ballistic limit of anchored PE-SMA composites with an embedment length of 35 mm is 72.72% higher than that of the homogeneous glass/epoxy composites. CAI results indicate that the PE-SMA based composites have better damage tolerance with respect to the homogeneous ones at 70 m/s. In contrast, at higher velocities, the delamination area decreases in the homogenous glass/epoxy composites due to more localized damage and present a higher compressive strength.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available