Related references
Note: Only part of the references are listed.A thin dielectric ceramic coating with good absorbing properties composed by tungsten carbide and alumina
Tengqiang Shao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Dry sliding wear behaviour of HVOF thermal sprayed WC-Co-Cr and WC-CrxCy-Ni coatings
Bo Song et al.
WEAR (2020)
Preparation of WC/CoCrFeNiAl0.2 high-entropy-alloy composites by high-gravity combustion synthesis
Guan-nan Zhang et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)
Microwave sintering of ceramic reinforced metal matrix composites and their properties: a review
S. A. A. Alem et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Preparation of ultrafine cemented carbides with uniform structure and high properties by microwave sintering
Zhiwei Zhao et al.
MATERIALS LETTERS (2020)
Effect of WC content on microstructures and mechanical properties of FeCoCrNi high-entropy alloy/WC composite coatings by plasma cladding
Yingbo Peng et al.
SURFACE & COATINGS TECHNOLOGY (2020)
In-situ metal binder-phase formation to make WC-FeNi Cermets with spark plasma sintering from WC, Fe, Ni, and carbon powders
Corson L. Cramer et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Chromium carbide, carbon nano tubes and carbon fibers reinforced magnesium matrix hybrid composites prepared by spark plasma sintering
Ehsan Ghasali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The effects of metallic additives on the microstructure and mechanical properties of WC-Co cermets prepared by microwave sintering
Ehsan Ghasali et al.
CERAMICS INTERNATIONAL (2020)
Compressive creep of coarse-grain WC-Co and WC-TaC-Co hardmetals with uniform microstructure comprising rounded WC grains
A. A. Zaitsev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of Y2O3 on microstructure and mechanical properties of WC-Co-cemented carbides prepared via solid-liquid doping method and spark plasma sintering
Yong-Qiang Qin et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Spark plasma sinterability and dry sliding-wear resistance of WC densified with Co, Co plus Ni, and Co plus Ni plus Cr
Aniss-Rabah Boukantar et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Effect of chromium and carbon contents on the sintering of WC-Fe-Ni-Co-Cr multicomponent alloys
T. Soria-Biurrun et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Study of the potential effect of spark plasma sintering on the preparation of complex FGM/laminated WC-based cermet
Ehsan Ghasali et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
A novel TiC-based composite co-strengthened with AlN particulates and graphene nano-platelets
Van-Huy Nguyen et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Super hard carbon microtubes derived from natural cotton for development of high performance titanium composites
Kamyar Shirvanimoghaddam et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Corrosion behavior and in-vitro bioactivity of porous Mg/Al2O3 and Mg/Si3N4 metal matrix composites fabricated using microwave sintering process
Ehsan Ghasali et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Cemented carbide microstructures: a review
Jose Garcia et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Unexpected SiC nanowires growth during spark plasma sintering of WC-10Si: A comparative study on phase formation and microstructure properties against WC-10Co cermet
Ehsan Ghasali et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Preparation of Ti-based laminated composites through spark plasma sintering with different carbon sources as the bonding layer
Ehsan Ghasali et al.
CERAMICS INTERNATIONAL (2019)
Microstructure and Properties of CoCrFeNi(WC) High-Entropy Alloy Coatings Prepared Using Mechanical Alloying and Hot Pressing Sintering
Juan Xu et al.
COATINGS (2019)
Investigation on in-situ formed Al3V-Al-VC nano composite through conventional, microwave and spark plasma sintering
Ehsan Ghasali et al.
HELIYON (2019)
Spark plasma sintering of WC-based cermets/titanium and vanadium added composites: A comparative study on the microstructure and mechanical properties
Ehsan Ghasali et al.
CERAMICS INTERNATIONAL (2018)
Preparation of mullite/B4C composites: A comparative heating methods study on the effect of heating methods
Ehsan Ghasali et al.
CERAMICS INTERNATIONAL (2018)
Microstructures and wear behaviour of (FeCoCrNi)(1-x)(WC)(x) high entropy alloy composites
Rui Zhou et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Grain growth inhibition of hardmetals during initial heat-up
J. Poetschke et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
NbC grain growth control and mechanical properties of Ni bonded NbC cermets prepared by vacuum liquid phase sintering
S. G. Huang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
The influence of grain growth inhibitors on the microstructure and properties of submicron, ultrafine and nano-structured hardmetals - A review
S. Farag et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Ultra-low temperature fabrication of vanadium carbide reinforced aluminum nano composite through spark plasma sintering
Ehsan Ghasali et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effects of partial substitution of copper for cobalt on the microstructure and properties of ultrafine-grained WC-Co cemented carbides
Jianfeng Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Porous and non-porous alumina reinforced magnesium matrix composite through microwave and spark plasma sintering processes
Ehsan Ghasali et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Experimental Investigations to Study the Effects of Microwave Treatment Strategy on Tool Performance in Turning Operation
Durwesh Jhodkar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Microstructure and Corrosion Resistance of WC-Based Cermet/Fe-Based Amorphous Alloy Composite Coatings
Liping Xu et al.
COATINGS (2018)
Microwave Sintering of Advanced Composites Materials: A Review
Chirag Singhal et al.
MATERIALS TODAY-PROCEEDINGS (2018)
The effect of volume fraction of WC particles on wear behavior of in-situ WC/Fe composites by spark plasma sintering
Zhanzhan Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Mechanical properties and microstructure of WC-Fe-Ni-Co cemented carbides prepared by vacuum sintering
Yang Gao et al.
VACUUM (2017)
Fabrication of hard cermets by in-situ synthesis and infiltration of metal melts into WC powder compacts
Guanghua Liu et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)
Effect of Heating Method on Microstructure and Mechanical Properties of Zircon Reinforced Aluminum Composites
Hudsa Majidian et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2016)
Influence of Grain Growth Inhibitors and Powder Size on the Properties of Ultrafine and Nanostructured Cemented Carbides Sintered in Hydrogen
Tamara Aleksandrov Fabijanic et al.
METALS (2016)
The history of the technological progress of hardmetals
Hugo M. Ortner et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Study on the sintered characteristics and properties of nanostructured WC-15 wt% (Fe-Ni-Co) and WC-15 wt% Co hard metal alloys
Shih-Hsien Chang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
WC-Co Particles Reinforced Aluminum Matrix by Conventional and Microwave Sintering
Ehsan Ghasali et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Statistical analysis and multiobjective optimization of process parameters in plasma spraying of partially stabilized zirconia
Amir Hossein Pakseresht et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Densification and alloying of microwave sintering WC-8 wt.%Co composites
Rui Bao et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Functionally graded WC-Ti(C,N)-(Ta,Nb)C-Co hardmetals: Metallurgy and performance
J. Gluehmann et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)
Microwave Sintering: Fundamentals and Modeling
Kirill I. Rybakov et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)
Microwave sintering of nanocrystalline WC-12Co: Challenges and perspectives
B. Ratna Sunil et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
Nanostructured thin layers of vanadium oxides doped with cobalt, prepared by pulsed laser ablation: chemistry, local atomic structure, morphology and magnetism
C. M. Teodorescu et al.
JOURNAL OF EXPERIMENTAL NANOSCIENCE (2010)
Carbide phases formed in WC-M (M = Fe/Ni/Cr) systems
C. M. Femandes et al.
CERAMICS INTERNATIONAL (2009)
NbC as grain growth inhibitor and carbide in WC-Co hardmetals
S. G. Huang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2008)
Comparison between microwave and conventional sintering of WC/Co composites
E Breval et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
A thermodynamic assessment of the Co-V system
J Bratberg et al.
JOURNAL OF PHASE EQUILIBRIA (2003)
Share Paper
