Related references
Note: Only part of the references are listed.Performance evaluation of latent heat TES system-case study: Dimensions improvements of annular fins exchanger
Z. Elmaazouzi et al.
ENERGY REPORTS (2020)
Thermal properties characterization of chloride salts/nanoparticles composite phase change material for high-temperature thermal energy storage
Dongmei Han et al.
APPLIED ENERGY (2020)
Numerical investigation of natural convection behavior of molten PCM in an enclosure having rectangular and tree-like branching fins
Cagatay Yildiz et al.
ENERGY (2020)
Editorial: Organic Rankine Cycle for Efficiency Improvement of Industrial Processes and Urban Systems
Enhua Wang et al.
FRONTIERS IN ENERGY RESEARCH (2020)
Comprehensive analysis of preparation strategies for phase change nanocomposites and nano fluids with brief overview of safety equipment
Miso Jurcevic et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Thermal energy storage with phase change materials: Application on coaxial heat exchanger with fins
Zakaria Elmaazouzi et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Advanced thermal systems driven by paraffin-based phase change materials - A review
Raza Gulfam et al.
APPLIED ENERGY (2019)
Investigation of organic Rankine cycle integrated with double latent thermal energy storage for engine waste heat recovery
Xiaoli Yu et al.
ENERGY (2019)
Recent developments in phase change materials for energy storage applications: A review
Hassan Nazir et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
A review of performance investigation and enhancement of shell and tube thermal energy storage device containing molten salt based phase change materials for medium and high temperature applications
Qi Li et al.
APPLIED ENERGY (2019)
Latent Heat Thermal Energy Storage Systems with Solid-Liquid Phase Change Materials: A Review
Nan Zhang et al.
ADVANCED ENGINEERING MATERIALS (2018)
Cyclic performance of cascaded and multi-layered solid-PCM shell-and-tube thermal energy storage systems: A case study of the 19.9 MWe Gemasolar CSP plant
S. Saeed Mostafavi Tehrani et al.
APPLIED ENERGY (2018)
A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges
Kun Du et al.
APPLIED ENERGY (2018)
Thermal power fluctuations in waste heat to power systems: An overview on the challenges and current solutions
Manuel Jimenez-Arreola et al.
APPLIED THERMAL ENGINEERING (2018)
Dynamic performance analysis of solar organic Rankine cycle with thermal energy storage
Shuai Li et al.
APPLIED THERMAL ENGINEERING (2018)
Numerical comparison between single PCM and multi-stage PCM based high temperature thermal energy storage for CSP tower plants
K. E. Elfeky et al.
APPLIED THERMAL ENGINEERING (2018)
Phase-change materials (PCM) for automotive applications: A review
Joris Jaguemont et al.
APPLIED THERMAL ENGINEERING (2018)
An overview of thermal energy storage systems
Guruprasad Alva et al.
ENERGY (2018)
Experimental study on thermal performance of high-temperature molten salt cascaded latent heat thermal energy storage system
Fan Yuan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Effects of nanoparticle-enhanced phase change material (NPCM) on solar still productivity
D. Dsilva Winfred Rufuss et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: A review
Gaosheng Wei et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage
Yaxue Lin et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
A review of phase change material and performance enhancement method for latent heat storage system
Y. B. Tao et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Application of high temperature phase change materials for improved efficiency in waste-to-energy plants
Fabio Dal Magro et al.
WASTE MANAGEMENT (2018)
Mobilized thermal energy storage: Materials, containers and economic evaluation
Shaopeng Guo et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Simulation on PCM melting enhancement with double-fin length arrangements in a rectangular enclosure induced by natural convection
Chenzhen Ji et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Numerical investigation of PCM solidification in a finned rectangular heat exchanger including natural convection
Imen Jmal et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Review on Heat Transfer Enhancement of Phase Change Materials (PCMs)
P. Sivasamy et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Coupling waste heat extraction by phase change materials with superheated steam generation in the steel industry
Fabio Dal Magro et al.
ENERGY (2017)
Preparation and thermal properties of short carbon fibers/erythritol phase change materials
Qiang Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Review on transportable phase change material in thermal energy storage systems
N. H. S. Tay et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Thermal energy storage materials and systems for solar energy applications
Guruprasad Alva et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
A critical review of eutectic salt property prediction for latent heat energy storage systems
Ralf Raud et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
A review for phase change materials (PCMs) in solar absorption refrigeration systems
Mohammed Mumtaz A. Khan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review
Nasiru I. Ibrahim et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
A review on current status and challenges of inorganic phase change materials for thermal energy storage systems
Shamseldin A. Mohamed et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Phase change materials and carbon nanostructures for thermal energy storage: A literature review
C. Amaral et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Thermophysical properties enhancement of ternary carbonates with carbon materials for high-temperature thermal energy storage
Zhaoli Zhang et al.
SOLAR ENERGY (2017)
Considerations for the use of metal alloys as phase change materials for high temperature applications
A. Ines Fernandez et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Improving energy recovery efficiency by retrofitting a PCM-based technology to an ORC system operating under thermal power fluctuations
Fabio Dal Magro et al.
APPLIED ENERGY (2017)
A small-scale solar organic Rankine cycle combined heat and power system with integrated thermal energy storage
J. Freeman et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical analysis on the energy storage efficiency of phase change material embedded in finned metal foam with graded porosity
Feng Zhu et al.
APPLIED THERMAL ENGINEERING (2017)
Exergy analysis and parameter optimization of heat pipe receiver with integrated latent heat thermal energy storage for space station in charging process
Hong-jie Song et al.
APPLIED THERMAL ENGINEERING (2017)
Techno-economic assessment of mobilized thermal energy storage for distributed users: A case study in China
Shaopeng Guo et al.
APPLIED ENERGY (2017)
Thermal energy storage for low and medium temperature applications using phase change materials - A review
Jose Pereira da Cunha et al.
APPLIED ENERGY (2016)
Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer
Philip D. Myers et al.
APPLIED ENERGY (2016)
Modelling and simulation of phase change material latent heat storages applied to a solar-powered Organic Rankine Cycle
Giampaolo Manfrida et al.
APPLIED ENERGY (2016)
Experimental characterization and simulation of a fin-tube latent heat storage using high density polyethylene as PCM
Christoph Zauner et al.
APPLIED ENERGY (2016)
Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review
Laia Miro et al.
APPLIED ENERGY (2016)
Cyclic behaviors of the molten-salt packed-bed thermal storage system filled with cascaded phase change material capsules
Ming Wu et al.
APPLIED THERMAL ENGINEERING (2016)
Thermal stress analysis of PCM containers for temperature smoothing of waste gas
F. Dal Magro et al.
APPLIED THERMAL ENGINEERING (2016)
Industrial surplus heat transportation for use in district heating
J. N. W. Chiu et al.
ENERGY (2016)
Discharging process of a finned heat pipe-assisted thermal energy storage system with high temperature phase change material
Saeed Tiari et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Numerical investigation of PCM melting process in sleeve tube with internal fins
Peilun Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Study on phase change interface for erythritol with nano-copper in spherical container during heat transport
Xuelai Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Experimental investigation of Mg-Zn-Al metal alloys for latent heat storage application
Elena Risueno et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Thermal energy storage: Recent developments and practical aspects
Huili Zhang et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2016)
Thermal energy storage system integration forms for a sustainable future
Gang Li et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Materials and system requirements of high temperature thermal energy storage systems: A review. Part 2: Thermal conductivity enhancement techniques
Jaume Gasia et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Nano-enhanced phase change materials for improved building performance
Zhenjun Ma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Development of graphite foam infiltrated with MgCl2 for a latent heat based thermal energy storage (LHTES) system
Dileep Singh et al.
RENEWABLE ENERGY (2016)
Thermal conductivity enhancement of recycled high density polyethylene as a storage media for latent heat thermal energy storage
C. Yang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Preparation and thermal energy storage properties of D-Mannitol/expanded graphite composite phase change material
Tao Xu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Heat transfer characteristics of a molten-salt thermal energy storage unit with and without heat transfer enhancement
P. Zhang et al.
APPLIED ENERGY (2015)
Effects of natural convection on latent heat storage performance of salt in a horizontal concentric tube
Y. B. Tao et al.
APPLIED ENERGY (2015)
Industrial waste heat recovery technologies: An economic analysis of heat transformation technologies
Sarah Brueckner et al.
APPLIED ENERGY (2015)
Effect of surface active agent on thermal properties of carbonate salt/carbon nanomaterial composite phase change material
Y. B. Tao et al.
APPLIED ENERGY (2015)
Thermal energy charging behaviour of a heat exchange device with a zigzag plate configuration containing multi-phase-change-materials (m-PCMs)
Peilun Wang et al.
APPLIED ENERGY (2015)
Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: A review to recent developments
Ben Xu et al.
APPLIED ENERGY (2015)
High thermal conductivity phase change composite with percolating carbon fiber network
Takahiro Nomura et al.
APPLIED ENERGY (2015)
Experimental study on solving the blocking for the direct contact mobilized thermal energy storage container
Shaopeng Guo et al.
APPLIED THERMAL ENGINEERING (2015)
Thermal properties measurement and heat storage analysis of paraffinnanoparticles composites phase change material: Comparison and optimization
Aziz Babapoor et al.
APPLIED THERMAL ENGINEERING (2015)
Study on the thermal storage performance of a gravity-assisted heat-pipe thermal storage unit with granular high-temperature phase-change materials
Zhen-hua Liu et al.
ENERGY (2015)
Fundamental research on the gravity assisted heat pipe thermal storage unit (GAHP-TSU) with porous phase change materials (PCMs) for medium temperature applications
Bo-wen Hu et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Enhancing energy recovery in the steel industry: Matching continuous charge with off-gas variability smoothing
Fabio Dal Magro et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Three-dimensional simulation of high temperature latent heat thermal energy storage system assisted by finned heat pipes
Saeed Tiari et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Experimental and numerical study of heat transfer performance of nitrate/expanded graphite composite PCM for solar energy storage
X. Xiao et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Preparation and thermal properties characterization of carbonate salt/carbon nanomaterial composite phase change material
Y. B. Tao et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Numerical study of finned heat pipe-assisted thermal energy storage system with high temperature phase change material
Saeed Tiari et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Experimental Investigation of a Cascaded Latent Heat Storage System for Diesel Engine Waste Heat Recovery
M. Chinnapandian et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2015)
Numerical study on performance enhancement of shell-and-tube latent heat storage unit
Y. B. Tao et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)
Simulation of heat pipe-assisted latent heat thermal energy storage with simultaneous charging and discharging
Nourouddin Sharifi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Lithium in thermal energy storage: A state-of-the-art review
Luisa F. Cabeza et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Mapping and discussing Industrial Waste Heat (IWH) potentials for different countries
Laia Miro et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Experimental evaluation at pilot plant scale of multiple PCMs (cascaded) vs. single PCM configuration for thermal energy storage
Gerard Peiro et al.
RENEWABLE ENERGY (2015)
Analysis of a graphite foam-NaCl latent heat storage system for supercritical CO2 power cycles for concentrated solar power
Dileep Singh et al.
SOLAR ENERGY (2015)
Graphite nanoplates loading into eutectic mixture of Adipic acid and Sebacic acid as phase change material
Yoldas Seki et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Metallic phase change material thermal storage for dish Stirling
C. E. Andraka et al.
INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS, SOLARPACES 2014 (2015)
Design of a latent thermal energy storage system with embedded heat pipes
K. Nithyanandam et al.
APPLIED ENERGY (2014)
Thermal property measurement and heat storage analysis of LiNO3/KCl - expanded graphite composite phase change material
Zhaowen Huang et al.
APPLIED ENERGY (2014)
Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin-tube heat exchanger
Jungwook Shon et al.
APPLIED ENERGY (2014)
A review of phase change materials for vehicle component thermal buffering
Nicholas R. Jankowski et al.
APPLIED ENERGY (2014)
PCM-based energy recovery from electric arc furnaces
Gioacchino Nardin et al.
APPLIED ENERGY (2014)
Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES)
Weilong Wang et al.
APPLIED ENERGY (2014)
Development of a thermal oil operated waste heat exchanger within the off-gas of an electric arc furnace at steel mills
Christian Brandt et al.
APPLIED THERMAL ENGINEERING (2014)
Development of highly conductive KNO3/NaNO3 composite for TES (thermal energy storage)
Y. J. Zhao et al.
ENERGY (2014)
Influence of nanomaterials on properties of latent heat solar thermal energy storage materials - A review
G. Raam Dheep et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Theoretical and experimental investigation of plate screen mesh heat pipe solar collector
Taoufik Brahim et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Exergetic analysis of a solar thermal power system with PCM storage
M. H. Mahfuz et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Modeling of Thermal Energy Storage Shell-and-Tube Heat Exchanger
Andrew J. Parry et al.
HEAT TRANSFER ENGINEERING (2014)
Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage
Feng Ye et al.
PARTICUOLOGY (2014)
Phase change materials for thermal energy storage
Kinga Pielichowska et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Phase change material with graphite foam for applications in high-temperature latent heat storage systems of concentrated solar power plants
Weihuan Zhao et al.
RENEWABLE ENERGY (2014)
Numerical study on the thermal behavior of phase change materials (PCMs) embedded in porous metal matrix
Zhuo Li et al.
SOLAR ENERGY (2014)
Preparation and thermal properties of porous heterogeneous composite phase change materials based on molten salts/expanded graphite
Limin Zhong et al.
SOLAR ENERGY (2014)
Computational studies on a latent thermal energy storage system with integral heat pipes for concentrating solar power
K. Nithyanandam et al.
APPLIED ENERGY (2013)
Numerical simulation study on optimizing charging process of the direct contact mobilized thermal energy storage
Shaopeng Guo et al.
APPLIED ENERGY (2013)
Economic assessment of the mobilized thermal energy storage (M-TES) system for distributed heat supply
Hailong Li et al.
APPLIED ENERGY (2013)
Ca(NO3)2-NaNO3-KNO3 Molten Salt Mixtures for Direct Thermal Energy Storage Systems in Parabolic Trough Plants
Judith C. Gomez et al.
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2013)
High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques
Bruno Cardenas et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Thermal stability of phase change materials used in latent heat energy storage systems: A review
Manish K. Rathod et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Numerical analysis and parameters optimization of shell-and-tube heat storage unit using three phase change materials
Y. Q. Li et al.
RENEWABLE ENERGY (2013)
Thermal energy storage for solar-powered organic Rankine cycle engines
E. Casati et al.
SOLAR ENERGY (2013)
Experimental study on thermophysical properties of nanofluids as phase-change material (PCM) in low temperature cool storage
Qinbo He et al.
ENERGY CONVERSION AND MANAGEMENT (2012)
Review of thermal energy storage for air conditioning systems
Abduljalil A. Al-Abidi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes
Y. B. Tao et al.
SOLAR ENERGY (2012)
Heat transfer and exergy analysis of cascaded latent heat storage with gravity-assisted heat pipes for concentrating solar power applications
Hamidreza Shabgard et al.
SOLAR ENERGY (2012)
Selection of materials for high temperature latent heat energy storage
Sameer Khare et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Experimental investigation on heat recovery from diesel engine exhaust using finned shell and tube heat exchanger and thermal storage system
V. Pandiyarajan et al.
APPLIED ENERGY (2011)
Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials
D. Zhou et al.
APPLIED THERMAL ENGINEERING (2011)
Second law analysis of a diesel engine waste heat recovery with a combined sensible and latent heat storage system
V. Pandiyarajan et al.
ENERGY POLICY (2011)
Analysis and optimization of a latent thermal energy storage system with embedded heat pipes
K. Nithyanandam et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
Multicomponent Molten Salt Mixtures Based on Nitrate/Nitrite Anions
Joseph G. Cordaro et al.
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Experimental investigations of porous materials in high temperature thermal energy storage systems
Z. G. Wu et al.
SOLAR ENERGY (2011)
Economic evaluation of latent heat thermal energy storage using embedded thermosyphons for concentrating solar power applications
Christopher W. Robak et al.
SOLAR ENERGY (2011)
Thermal energy storage for direct steam generation
Doerte Laing et al.
SOLAR ENERGY (2011)
Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite
C. Y. Zhao et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Thermal analysis of phase change materials in the temperature range 120-150°C
D. Haillot et al.
THERMOCHIMICA ACTA (2011)
Analysis of the experimental behaviour of a 100 kWth latent heat storage system for direct steam generation in solar thermal power plants
Rocio Bayon et al.
APPLIED THERMAL ENGINEERING (2010)
Heat transfer efficient thermal energy storage for steam generation
R. Adinberg et al.
ENERGY CONVERSION AND MANAGEMENT (2010)
High temperature latent heat thermal energy storage using heat pipes
H. Shabgard et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)
Development of PCM Reactor for Methane Steam Reforming
Nobuhiro Maruoka et al.
ISIJ INTERNATIONAL (2010)
State of the art on high temperature thermal energy storage for power generation. Part 1-Concepts, materials and modellization
Antoni Gil et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
State of the art on high-temperature thermal energy storage for power generation. Part 2-Case studies
Marc Medrano et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
High-temperature phase change materials for thermal energy storage
Murat M. Kenisarin
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)
Francis Agyenim et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Waste heat transportation system, using phase change material (PCM) from steelworks to chemical plant
Takahiro Nomura et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
Reducing cold-start emission from internal combustion engines by means of thermal energy storage system
M. Gumus
APPLIED THERMAL ENGINEERING (2009)
Development of PCM Storage for Process Heat and Power Generation
Wolf-Dieter Steinmann et al.
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Review on thermal energy storage with phase change materials and applications
Atul Sharma et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins
Francis Agyenim et al.
SOLAR ENERGY (2009)
Numerical simulation and parametric study on new type of high temperature latent heat thermal energy storage system
Chaxiu Guo et al.
ENERGY CONVERSION AND MANAGEMENT (2008)
Elaboration of conductive thermal storage composites made of phase change materials and graphite for solar plant
S. Pincemin et al.
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs
R. V. Seeniraj et al.
SOLAR ENERGY (2008)
Highly conductive composites made of phase change materials and graphite for thermal storage
S. Pincemin et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)
Solar energy storage using phase change materials
Murat Kenisarin et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2007)
Emerging energy-efficient technologies for hybrid electric vehicles
K. T. Chau et al.
PROCEEDINGS OF THE IEEE (2007)
Thermal reliability test of Al-34%Mg-6%Zn alloy as latent heat storage material and corrosion of metal with respect to thermal cycling
J. Q. Sun et al.
ENERGY CONVERSION AND MANAGEMENT (2007)
Cascaded latent heat storage for parabolic trough solar power plants
Horst Michels et al.
SOLAR ENERGY (2007)
Experimental research on a kind of novel high temperature phase change storage heater
Xin Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2006)
Exergy recovery from steelmaking off-gas by latent heat storage for methanol production
Nobuhiro Maruoka et al.
ENERGY (2006)
An experimental study on heat transfer characteristics of heat pipe heat exchanger with latent heat storage. Part 1: Charging only and discharging only modes
ZL Liu et al.
ENERGY CONVERSION AND MANAGEMENT (2006)
An experimental study on the heat transfer characteristics of a heat pipe heat exchanger with latent heat storage. Part II: Simultaneous charging/discharging modes
ZL Liu et al.
ENERGY CONVERSION AND MANAGEMENT (2006)
Feasibility study for recovering waste heat in the steelmaking industry using a chemical recuperator
N Maruoka et al.
ISIJ INTERNATIONAL (2004)
Thermal performance analysis for a heat receiver using multiple phase change materials
HT Cui et al.
APPLIED THERMAL ENGINEERING (2003)
Thermal stress analysis of PCM encapsulation for heat recovery of high temperature waste heat
N Maruoka et al.
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2003)
Review on thermal energy storage with phase change:: materials, heat transfer analysis and applications
B Zalba et al.
APPLIED THERMAL ENGINEERING (2003)
Development of PCM for recovering high temperature waste heat and utilization for producing hydrogen by reforming reaction of methane
N Maruoka et al.
ISIJ INTERNATIONAL (2002)
A study on latent heat storage exchangers with the high-temperature phase-change material
Q He et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2001)
Latent heat storage modules for preheating internal combustion engines: application to a bus petrol engine
LL Vasiliev et al.
APPLIED THERMAL ENGINEERING (2000)
Share Paper
