Related references
Note: Only part of the references are listed.Big data algorithms and applications in intelligent transportation system: A review and bibliometric analysis
Sepideh Kaffash et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2021)
Dynamic modeling and experimental investigation of self-powered sensor nodes for freight rail transport
Mingyuan Gao et al.
APPLIED ENERGY (2020)
Regenerative active suspension system with residual energy for in-wheel motor driven electric vehicle
Guimin Long et al.
APPLIED ENERGY (2020)
Coordinated control strategy of electro-hydraulic braking for energy regeneration
Pei Xiaofei et al.
CONTROL ENGINEERING PRACTICE (2020)
Development and performance of a piezoelectric energy conversion structure applied in pavement
Shuai Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
The applications of energy regeneration and conversion technologies based on hydraulic transmission systems: A review
Xiangyu He et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Vehicle communication network in intelligent transportation system based on Internet of Things
Hong Zhang et al.
COMPUTER COMMUNICATIONS (2020)
Multi-frequency energy harvesting method for vehicle induced vibration of rail transit continuous rigid bridges
Wenqi Hou et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Parametric design and regenerative braking control of a parallel hydraulic hybrid vehicle
Shilei Zhou et al.
MECHANISM AND MACHINE THEORY (2020)
A dual vibration reduction structure-based self-powered active suspension system with PMSM-ball screw actuator via an improved H2/H∞ control
Shi-An Chen et al.
ENERGY (2020)
An electro-mechanical braking energy recovery system based on coil springs for energy saving applications in electric vehicles
Lingfei Qi et al.
ENERGY (2020)
Enhanced energy-generation performance of a landfilled road-capable piezoelectric harvester to scavenge energy from passing vehicles
Seong Do Hong et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Dynamic interaction between rail vehicles and vibration-attenuating slab tracks
Liang Ling et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Analysis of energy characteristic and working performance of novel controllable hydraulic accumulator with simulation and experimental methods
Yanxiong Liu et al.
ENERGY CONVERSION AND MANAGEMENT (2020)
Effect of additional anti-vibration sleeper track considering sleeper spacing and track support stiffness on reducing low-frequency vibrations
Deokyong Sung et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Electric vehicle charging optimization to minimize marginal greenhouse gas emissions from power generation
Ran Tu et al.
APPLIED ENERGY (2020)
Field measurement of rail corrugation influence on environmental noise and vibration: A case study in China
Tao Xin et al.
MEASUREMENT (2020)
Numerical analysis of a new piezoelectric-based energy harvesting pavement system: Lessons from laboratory-based and field-based simulations
Lukai Guo et al.
APPLIED ENERGY (2019)
e-Road: The largest energy supply of the future?
Jianzhong Pei et al.
APPLIED ENERGY (2019)
A theoretical study on the train-induced vibrations of a semi-active magneto-rheological steel-spring floating slab track
Kai Wei et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Energy transfer and utilization efficiency of regenerative braking with hybrid energy storage system
Wanzhong Zhao et al.
JOURNAL OF POWER SOURCES (2019)
Modelling and ride analysis of a hydraulic interconnected suspension based on the hydraulic energy regenerative shock absorbers
Junyi Zou et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Modeling and field-test of a compact electromagnetic energy harvester for railroad transportation
Yu Pan et al.
APPLIED ENERGY (2019)
Modeling and onboard test of an electromagnetic energy harvester for railway cars
Yu Pan et al.
APPLIED ENERGY (2019)
Performance of a speed bump piezoelectric energy harvester for an automatic cellphone charging system
Gyeong Ju Song et al.
APPLIED ENERGY (2019)
Harvesting kinetic energy from roadway pavement through an electromagnetic speed bump
Mohammadreza Gholikhani et al.
APPLIED ENERGY (2019)
A portable renewable wind energy harvesting system integrated S-rotor and H-rotor for self-powered applications in high-speed railway tunnels
Hongye Pan et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Applicability evaluation of embedded piezoelectric energy harvester applied in pavement structures
Chaohui Wang et al.
APPLIED ENERGY (2019)
A high-efficiency multidirectional wind energy harvester based on impact effect for self-powered wireless sensors in the grid
Minfeng Tang et al.
SMART MATERIALS AND STRUCTURES (2019)
Development of a pavement block piezoelectric energy harvester for self-powered walkway applications
Gyeong Ju Song et al.
APPLIED ENERGY (2019)
On the target frequency for harvesting energy from track vibrations due to passing trains
V. G. Cleante et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Optimization of using recuperative braking energy on a double-track railway line
Michal Urbaniak et al.
13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON SUSTAINABLE, MODERN AND SAFE TRANSPORT (TRANSCOM 2019) (2019)
Pendulum systems for harvesting vibration energy from railroad tracks and sleepers during the passage of a high-speed train: A feasibility evaluation
Franco E. Dotti et al.
THEORETICAL AND APPLIED MECHANICS LETTERS (2019)
Design and analysis of a parallel hydraulic - pneumatic regenerative braking system for heavy-duty hybrid vehicles
Rafael Rivelino Silva Bravo et al.
APPLIED ENERGY (2018)
Development and application of China provincial road transport energy demand and GHG emissions analysis model
Tianduo Peng et al.
APPLIED ENERGY (2018)
Design, simulation and experiment of a novel high efficiency energy harvesting paver
Mingyi Liu et al.
APPLIED ENERGY (2018)
Modeling and field testing of an electromagnetic energy harvester for rail tracks with anchorless mounting
Teng Lin et al.
APPLIED ENERGY (2018)
Decarbonization of China's transportation sector: In light of national mitigation toward the Paris Agreement goals
Xunzhang Pan et al.
ENERGY (2018)
A high-efficiency energy regenerative shock absorber using helical gears for powering low-wattage electrical device of electric vehicles
Waleed Salman et al.
ENERGY (2018)
The influence of accessory energy consumption on evaluation method of braking energy recovery contribution rate
Ning Li et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
A high-efficiency road energy harvester based on a chessboard sliding plate using semi-metal friction materials for self-powered applications in road traffic
Lingfei Qi et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Electric vehicle range extension strategies based on improved AC system in cold climate - A review
Ziqi Zhang et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2018)
Railway vehicle induced vibration energy harvesting and saving of rail transit segmental prefabricated and assembling bridges
Wenqi Hou et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Vibration and noise characteristics of an elevated box girder paved with different track structures
Xiaozhen Li et al.
JOURNAL OF SOUND AND VIBRATION (2018)
Performance-oriented controls of a novel rocker-pushrod electromagnetic active vehicle suspension
Cheng Gu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Damping-tunable energy-harvesting vehicle damper with multiple controlled generators: Design, modeling and experiments
Longhan Xie et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Vibration control of an energy regenerative seat suspension with variable external resistance
Donghong Ning et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Efficient electromagnetic energy harvester for railroad transportation
Teng Lin et al.
MECHATRONICS (2018)
Analysis of energy efficiency in China's transportation sector
Chao Feng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Energy harvesting from vehicular traffic over speed bumps: a review
Gonzalo del Castillo-Garcia et al.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENERGY (2018)
Optimization design and experimental investigation of piezoelectric energy harvesting devices for pavement
Chaohui Wang et al.
APPLIED ENERGY (2018)
A renewable low-frequency acoustic energy harvesting noise barrier for high-speed railways using a Helmholtz resonator and a PVDF film
Yuan Wang et al.
APPLIED ENERGY (2018)
Condition monitoring of urban rail transit by local energy harvesting
Mingyuan Gao et al.
INTERNATIONAL JOURNAL OF DISTRIBUTED SENSOR NETWORKS (2018)
Contributions to sector-level carbon intensity change: An integrated decomposition analysis
Qunwei Wang et al.
ENERGY ECONOMICS (2018)
Influences of the electromagnetic regenerative dampers on the vehicle suspension performance
Peng Li et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2017)
Energy conversion mechanism and regenerative potential of vehicle suspensions
Yuxin Zhang et al.
ENERGY (2017)
A portable solar-powered air-cooling system based on phase-change materials for a vehicle cabin
Lingfei Qi et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Analysis, Prototyping, and Experimental Characterization of an Adaptive Hybrid Electromagnetic Damper for Automotive Suspension Systems
Ehsan Asadi et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2017)
Electromagnetic Energy-Harvesting Damper With Multiple Independently Controlled Transducers: On-Demand Damping and Optimal Energy Regeneration
Longhan Xie et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2017)
Design, Modeling, Lab, and Field Tests of a Mechanical-Motion-Rectifier-Based Energy Harvester Using a Ball-Screw Mechanism
Yilun Liu et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2017)
Self-powered suspension criterion and energy regeneration implementation scheme of motor-driven active suspension
Shuai Yan et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)
Train-induced field vibration measurements of ground and over-track buildings
Chao Zou et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2017)
Feasibility study of impact-based piezoelectric road energy harvester for wireless sensor networks in smart highways
Chan Ho Yang et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Design, Modeling, and Analysis of a Novel Hydraulic Energy-Regenerative Shock Absorber for Vehicle Suspension
Junyi Zou et al.
SHOCK AND VIBRATION (2017)
Modeling a new energy harvesting pavement system with experimental verification
Lukai Guo et al.
APPLIED ENERGY (2017)
Smart monitoring of underground railway by local energy generation
Mingyuan Gao et al.
UNDERGROUND SPACE (2017)
A renewable energy harvesting system using a mechanical vibration rectifier (MVR) for railroads
Xingtian Zhang et al.
APPLIED ENERGY (2017)
A portable renewable solar energy-powered cooling system based on wireless power transfer for a vehicle cabin
Hongye Pan et al.
APPLIED ENERGY (2017)
Design of a hydraulic servo-actuation fed by a regenerative braking system
L. Pugi et al.
APPLIED ENERGY (2017)
Design, modelling and practical tests on a high-voltage kinetic energy harvesting (EH) system for a renewable road tunnel based on linear alternators
Zutao Zhang et al.
APPLIED ENERGY (2016)
Piezoelectric energy harvester for public roadway: On-site installation and evaluation
Haocheng Xiong et al.
APPLIED ENERGY (2016)
Energy harvesting from asphalt pavement roadways vehicle-induced stresses: A feasibility study
Hossein Roshani et al.
APPLIED ENERGY (2016)
A high-efficiency energy regenerative shock absorber using supercapacitors for renewable energy applications in range extended electric vehicle
Zutao Zhang et al.
APPLIED ENERGY (2016)
Analysis of a flywheel energy storage system for light rail transit
A. Rupp et al.
ENERGY (2016)
Energetic optimization of regenerative braking for high speed railway systems
Amedeo Frilli et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
A portable high-efficiency electromagnetic energy harvesting system using supercapacitors for renewable energy applications in railroads
Xingtian Zhang et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Harvesting energy from the vibration of a passing train using a single-degree-of-freedom oscillator
G. Gatti et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)
A low-carbon transport infrastructure in Taiwan based on the implementation of energy-saving measures
Shyi-Min Lu
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Analysis of road transportation energy consumption demand in China
Jian Chai et al.
TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2016)
Performance evaluation and parameter sensitivity of energy-harvesting shock absorbers on different vehicles
Sijing Guo et al.
VEHICLE SYSTEM DYNAMICS (2016)
Energy harvesting on road pavements: state of the art
Francisco Duarte et al.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENERGY (2016)
On the use of train braking energy regarding the electrical consumption optimization in railway station
Lilia Galai-Dol et al.
TRANSPORT RESEARCH ARENA TRA2016 (2016)
Energy Harvesting from Roadways
A. T. Papagiannakis et al.
7TH INTERNATIONAL CONFERENCE ON AMBIENT SYSTEMS, NETWORKS AND TECHNOLOGIES (ANT 2016) / THE 6TH INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY INFORMATION TECHNOLOGY (SEIT-2016) / AFFILIATED WORKSHOPS (2016)
Usage of Road Weather Sensors for automatic traffic control on motorways
Andrea Haug et al.
INTERNATIONAL SYMPOSIUM ON ENHANCING HIGHWAY PERFORMANCE (ISEHP), (7TH INTERNATIONAL SYMPOSIUM ON HIGHWAY CAPACITY AND QUALITY OF SERVICE, 3RD INTERNATIONAL SYMPOSIUM ON FREEWAY AND TOLLWAY OPERATIONS) (2016)
Energy generation from weights of moving vehicles: A case study at Alaeddin Keykubad Campus-Konya/Turkey
Omari Mashi Khalfan et al.
ENERGY (2015)
Novel control algorithm of braking energy regeneration system for an electric vehicle during safety-critical driving maneuvers
Chen Lv et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Mechanism analysis and evaluation methodology of regenerative braking contribution to energy efficiency improvement of electrified vehicles
Chen Lv et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
China's transportation energy consumption and CO2 emissions from a global perspective
Xiang Yin et al.
ENERGY POLICY (2015)
Power Electronics Control of an Energy Regenerative Mechatronic Damper
Yaser M. Roshan et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)
Regenerative Shock Absorber Using a Two-Leg Motion Conversion Mechanism
Amir Maravandi et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2015)
Study on a novel hydraulic pumping regenerative suspension for vehicles
Yuxin Zhang et al.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2015)
Using speed bump for power generation - Experimental study
Mohamad Ramadan et al.
CLEAN, EFFICIENT AND AFFORDABLE ENERGY FOR A SUSTAINABLE FUTURE (2015)
Piezoelectric and ferroelectric materials and structures for energy harvesting applications
C. R. Bowen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
A systems approach to reduce urban rail energy consumption
A. Gonzalez-Gil et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Design and Optimization of a Tubular Linear Electromagnetic Vibration Energy Harvester
Xiudong Tang et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2014)
Energy Regenerative Suspension Using an Algebraic Screw Linkage Mechanism
Reza Sabzehgar et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2014)
Integration of shock absorption and energy harvesting using a hydraulic rectifier
Chuan Li et al.
JOURNAL OF SOUND AND VIBRATION (2014)
Optimal placement of omnidirectional sensors in a transportation network for effective emergency response and crash characterization
Tejswaroop Geetla et al.
TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES (2014)
Harvesting energy from automobile brake in contact and non-contact mode by conjunction of triboelectrication and electrostatic-induction processes
Chang Bao Han et al.
NANO ENERGY (2014)
Sustainable urban rail systems: Strategies and technologies for optimal management of regenerative braking energy
Arturo Gonzalez-Gil et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Novel Speed-Bump Design and Optimization for Energy Harvesting From Traffic
Andrea Pirisi et al.
IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS (2013)
Electromagnetic Energy-Harvesting Shock Absorbers: Design, Modeling, and Road Tests
Zhongjie Li et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2013)
An approach to energy savings and improved environmental impact through restructuring Jordan's transport sector
A. Al-Ghandoor
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
The influence of speed bumps heights to the decrease of the vehicle speed - Belgrade experience
Boris Antic et al.
SAFETY SCIENCE (2013)
Fabrication and testing of an energy-harvesting hydraulic damper
Chuan Li et al.
SMART MATERIALS AND STRUCTURES (2013)
Efficiency improvement in a vibration power generator for a linear MR damper: numerical study
Bogdan Sapinski et al.
SMART MATERIALS AND STRUCTURES (2013)
A Novel Road Energy Harvester System Based on Sliding Deceleration Design and Model
Zhifeng Chao et al.
ENERGY AND POWER TECHNOLOGY, PTS 1 AND 2 (2013)
Developing a mechanical roadway system for waste energy capture of vehicles and electric generation
Chen-Ching Ting et al.
APPLIED ENERGY (2012)
Novel Speed Bumps Design and Optimization for Vehicles' Energy Recovery in Smart Cities
Andrea Pirisi et al.
ENERGIES (2012)
Review of Power Conditioning for Kinetic Energy Harvesting Systems
Gyorgy D. Szarka et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2012)
A real vibration database for kinetic energy harvesting application
Igor Neri et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2012)
Opportunities and challenges for a sustainable energy future
Steven Chu et al.
NATURE (2012)
Design of active and energy-regenerative controllers for DC-motor-based suspension
Guoguang Zhang et al.
MECHATRONICS (2012)
Cooperative control of regenerative braking and hydraulic braking of an electrified passenger car
Junzhi Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2012)
A self-sensing magnetorheological damper with power generation
Chao Chen et al.
SMART MATERIALS AND STRUCTURES (2012)
Global energy consumption due to friction in passenger cars
Kenneth Holmberg et al.
TRIBOLOGY INTERNATIONAL (2012)
Decomposition analysis of energy consumption in Chinese transportation sector
Ming Zhang et al.
APPLIED ENERGY (2011)
Efficiency of a Regenerative Direct-Drive Electromagnetic Active Suspension
Bart L. J. Gysen et al.
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2011)
Fractal-Inspired Multifrequency Structures for Piezoelectric Harvesting of Ambient Kinetic Energy
D. Castagnetti
JOURNAL OF MECHANICAL DESIGN (2011)
A review on global fuel economy standards, labels and technologies in the transportation sector
A. E. Atabani et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Feasibility Study on Active Control of Hydraulic Electromagnetic Energy-regenerative Absorber
Lin Xu et al.
MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3 (2011)
Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies-State of the Art
Alireza Khaligh et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2010)
Design and characterization of an electromagnetic energy harvester for vehicle suspensions
Lei Zuo et al.
SMART MATERIALS AND STRUCTURES (2010)
Design Aspects of an Active Electromagnetic Suspension System for Automotive Applications
Bart L. J. Gysen et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2009)
Electro-mechanical suspension system considering energy consumption and vehicle manoeuvre
Y. Kawamoto et al.
VEHICLE SYSTEM DYNAMICS (2008)
Design considerations for a semi-active electromagnetic suspension system
Johannes J. H. Paulides et al.
IEEE TRANSACTIONS ON MAGNETICS (2006)
Self-powered active vibration control using a single electric actuator
K Nakano et al.
JOURNAL OF SOUND AND VIBRATION (2003)
Self-powered active vibration control using continuous control input
K Nakano et al.
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING (2000)