Related references
Note: Only part of the references are listed.Printability and Critical Insight into Polymer Properties during Direct-Extrusion Based 3D Printing of Medical Grade Polylactide and Copolyesters
Shubham Jain et al.
BIOMACROMOLECULES (2020)
Multimaterial Dual Gradient Three-Dimensional Printing for Osteogenic Differentiation and Spatial Segregation
Brandon T. Smith et al.
TISSUE ENGINEERING PART A (2020)
Development of 3D Printed Tablets by Fused Deposition Modeling Using Polyvinyl Alcohol as Polymeric Matrix for Rapid Drug Release
Can Wei et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Engineering considerations on extrusion-based bioprinting: interactions of material behavior, mechanical forces and cells in the printing needle
Julia Emmermacher et al.
BIOFABRICATION (2020)
Biochemical and structural cues of 3D-printed matrix synergistically direct MSC differentiation for functional sweat gland regeneration
Bin Yao et al.
SCIENCE ADVANCES (2020)
Materials design for bone-tissue engineering
Gerry L. Koons et al.
NATURE REVIEWS MATERIALS (2020)
3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration
Fiona E. Freeman et al.
SCIENCE ADVANCES (2020)
3D Printing of Poly(propylene fumarate) Oligomers: Evaluation of Resin Viscosity, Printing Characteristics and Mechanical Properties
Yuanyuan Luo et al.
BIOMACROMOLECULES (2019)
Poly(propylene fumarate)-based materials: Synthesis, functionalization, properties, device fabrication and biomedical applications
Zhongyu Cai et al.
BIOMATERIALS (2019)
Progress in three-dimensional printing with growth factors
Gerry L. Koons et al.
JOURNAL OF CONTROLLED RELEASE (2019)
Growth factor delivery: Defining the next generation platforms for tissue engineering
Lilith M. Caballero Aguilar et al.
JOURNAL OF CONTROLLED RELEASE (2019)
Effect of melt extrudability and melt binding efficiency of polyvinyl caprolactam polyvinyl acetate polyethylene glycol graft copolymer (Soluplus®) on release pattern of hydrophilic and high dose drugs
Tousif K. Ayyub et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
3D bioprinting via an in situ crosslinking technique towards engineering cartilage tissue
Jonathan H. Galarraga et al.
SCIENTIFIC REPORTS (2019)
Polyester-based ink platform with tunable bioactivity for 3D printing of tissue engineering scaffolds
Shen Ji et al.
BIOMATERIALS SCIENCE (2019)
Advances in surgical applications of growth factors for wound healing
Sho Yamakawa et al.
BURNS & TRAUMA (2019)
Effect of different sustained bone morphogenetic protein-2 release kinetics on bone formation in poly(propylene fumarate) scaffolds
Maurits G. L. Olthof et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications
Jesse K. Placone et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Boron nitride nanotubes and nanoplatelets as reinforcing agents of polymeric matrices for bone tissue engineering
Behzad Farshid et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)
Polymer degradation and drug delivery in PLGA-based drug-polymer applications: A review of experiments and theories
Yihan Xu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)
Controlled Delivery of Tissue Inductive Factors in a Cardiovascular Hybrid Biomaterial Scaffold
Laura G. Bracaglia et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Controlled Delivery of Tissue Inductive Factors in a Cardiovascular Hybrid Biomaterial Scaffold
Laura G. Bracaglia et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Heterogeneous hydrolytic degradation of poly(lactic-co-glycolic acid) microspheres: Mathematical modeling
Carlos Busatto et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
'Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art
Stuart Kyle et al.
ADVANCED HEALTHCARE MATERIALS (2017)
A highly printable and biocompatible hydrogel composite for direct printing of soft and perfusable vasculature-like structures
Ratima Suntornnond et al.
SCIENTIFIC REPORTS (2017)
Growth factor-eluting technologies for bone tissue engineering
Ethan Nyberg et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2016)
Engineering a growth factor embedded nanofiber matrix niche to promote vascularization for functional cardiac regeneration
Rajesh Lakshmanan et al.
BIOMATERIALS (2016)
A Mechanistic Model for Acidic Drug Release Using Microspheres Made of PLGA 50:50
Kevser Sevim et al.
MOLECULAR PHARMACEUTICS (2016)
Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design
Jordan E. Trachtenberg et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Extrusion-Based 3D Printing of Poly(propylene fumarate) in a Full-Factorial Design
Jordan E. Trachtenberg et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)
Micro-precise spatiotemporal delivery system embedded in 3D printing for complex tissue regeneration
Solaiman Tarafder et al.
BIOFABRICATION (2016)
Effect of Selective Heparin Desulfation on Preservation of Bone Morphogenetic Protein-2 Bioactivity after Thermal Stress
Song P. Seto et al.
BIOCONJUGATE CHEMISTRY (2015)
Evaluating Changes in Structure and Cytotoxicity During In Vitro Degradation of Three-Dimensional Printed Scaffolds
Martha O. Wang et al.
TISSUE ENGINEERING PART A (2015)
Tailoring Stimuli Responsiveness using Dynamic Covalent Cross-Linking of Poly(vinyl alcohol)-Heparin Hydrogels for Controlled Cell and Growth Factor Delivery
Justine J. Roberts et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)
Tailoring Stimuli Responsiveness using Dynamic Covalent Cross-Linking of Poly(vinyl alcohol)-Heparin Hydrogels for Controlled Cell and Growth Factor Delivery
Justine J. Roberts et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2015)
Retention of insulin-like growth factor I bioactivity during the fabrication of sintered polymeric scaffolds
Amanda Clark et al.
BIOMEDICAL MATERIALS (2014)
Effects of Antibiotic Physicochemical Properties on Their Release Kinetics from Biodegradable Polymer Microparticles
Sarita R. Shah et al.
PHARMACEUTICAL RESEARCH (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
A Review of Bioactive Release from Nerve Conduits as a Neurotherapeutic Strategy for Neuronal Growth in Peripheral Nerve Injury
Poornima Ramburrun et al.
BIOMED RESEARCH INTERNATIONAL (2014)
Evaluation of the In Vitro Cytotoxicity of Cross-Linked Biomaterials
Martha O. Wang et al.
BIOMACROMOLECULES (2013)
Osteochondral tissue regeneration using a bilayered composite hydrogel with modulating dual growth factor release kinetics in a rabbit model
Kyobum Kim et al.
JOURNAL OF CONTROLLED RELEASE (2013)
Sequential delivery of BMP-2 and IGF-1 using a chitosan gel with gelatin microspheres enhances early osteoblastic differentiation
Sungwoo Kim et al.
ACTA BIOMATERIALIA (2012)
Role of Solvation Effects in Protein Denaturation: From Thermodynamics to Single Molecules and Back
Jeremy L. England et al.
ANNUAL REVIEW OF PHYSICAL CHEMISTRY, VOL 62 (2011)
The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells
Kyobum Kim et al.
BIOMATERIALS (2011)
Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres
Jin Woo Lee et al.
BIOMATERIALS (2011)
The effects of carrier nature and pH on rhBMP-2-induced ectopic bone formation
Ludmila Luca et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Osteogenic Differentiation of Mesenchymal Stem Cells on Pregenerated Extracellular Matrix Scaffolds in the Absence of Osteogenic Cell Culture Supplements
Richard A. Thibault et al.
TISSUE ENGINEERING PART A (2010)
Synthesis of poly(propylene fumarate)
F. Kurtis Kasper et al.
NATURE PROTOCOLS (2009)
Retention of in vitro and in vivo BMP-2 bioactivities in sustained delivery vehicles for bone tissue engineering
Diederik H. R. Kempen et al.
BIOMATERIALS (2008)
Degradation and biocompatibility of a poly(propylene fumarate)-based/alumoxane nanocomposite for bone tissue engineering
A. S. Mistry et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Controlled drug release from a novel injectable biodegradable micro sphere/scaffold composite based on poly(propylene fumarate)
DHR Kempen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)
The effects of heat on the biological activity of recombinant human bone morphogenetic protein-2
H Ohta et al.
JOURNAL OF BONE AND MINERAL METABOLISM (2005)
In vitro release of transforming growth factor-β1 from gelatin microparticles encapsulated in biodegradable, injectable oligo(poly(ethylene glycol) fumarate) hydrogels
TA Holland et al.
JOURNAL OF CONTROLLED RELEASE (2003)
In vitro cytotoxicity of injectable and biodegradable poly(propylene fumarate)-based networks: Unreacted macromers, cross-linked networks, and degradation products
MD Timmer et al.
BIOMACROMOLECULES (2003)
Share Paper
