Related references
Note: Only part of the references are listed.Recent Development of Printed Micro-Supercapacitors: Printable Materials, Printing Technologies, and Perspectives
Hongpeng Li et al.
ADVANCED MATERIALS (2020)
Scalable fabrication of printed Zn//MnO2 planar micro-batteries with high volumetric energy density and exceptional safety
Xiao Wang et al.
NATIONAL SCIENCE REVIEW (2020)
Porous carbon nanosheet with high surface area derived from waste poly(ethylene terephthalate) for supercapacitor applications
Yanliang Wen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Sustainable recycling of waste polystyrene into hierarchical porous carbon nanosheets with potential applications in supercapacitors
Changde Ma et al.
NANOTECHNOLOGY (2020)
Defect engineering of MnO2 nanosheets by substitutional doping for printable solid-state micro-supercapacitors
Yang Wang et al.
NANO ENERGY (2020)
Turning Trash into Treasure: Additive Free MXene Sediment Inks for Screen-Printed Micro-Supercapacitors
Sina Abdolhosseinzadeh et al.
ADVANCED MATERIALS (2020)
Exfoliation of 2D Materials for Energy and Environmental Applications
Thanh-Hai Le et al.
CHEMISTRY-A EUROPEAN JOURNAL (2020)
2D Amorphous V2O5/Graphene Heterostructures for High-Safety Aqueous Zn-Ion Batteries with Unprecedented Capacity and Ultrahigh Rate Capability
Xiao Wang et al.
ADVANCED ENERGY MATERIALS (2020)
Two-Dimensional Amorphous SnOx from Liquid Metal: Mass Production, Phase Transfer, and Electrocatalytic CO2 Reduction toward Formic Acid
Tingbiao Yuan et al.
NANO LETTERS (2020)
Liquid-Metal-Templated Synthesis of 2D Graphitic Materials at Room Temperature
Mohannad Mayyas et al.
ADVANCED MATERIALS (2020)
Transforming polystyrene waste into 3D hierarchically porous carbon for high-performance supercapacitors
Changde Ma et al.
CHEMOSPHERE (2020)
A general ink formulation of 2D crystals for wafer-scale inkjet printing
Guohua Hu et al.
SCIENCE ADVANCES (2020)
Graphene-Supported 2D transition metal dichalcogenide van der waals heterostructures
Jalal Azadmanjiri et al.
APPLIED MATERIALS TODAY (2020)
Recent advances and future challenges in printed batteries
C. M. Costa et al.
ENERGY STORAGE MATERIALS (2020)
Bismuthene Metallurgy: Transformation of Bismuth Particles to Ultrahigh-Aspect-Ratio 2D Microsheets
Seyyed Mohsen Beladi-Mousavi et al.
SMALL (2020)
Advancements in Therapeutics via 3D Printed Multifunctional Architectures from Dispersed 2D Nanomaterial Inks
Pritam K. Chakraborty et al.
SMALL (2020)
A general approach towards carbonization of plastic waste into a well-designed 3D porous carbon framework for super lithium-ion batteries
Jiakang Min et al.
CHEMICAL COMMUNICATIONS (2020)
Atomically thin TiO2 nanosheets synthesized using liquid metal chemistry
Turki Alkathiri et al.
CHEMICAL COMMUNICATIONS (2020)
Surface Functionalization of 2D Transition Metal Oxides and Dichalcogenides via Covalent and Non-covalent Bonding for Sustainable Energy and Biomedical Applications
Jalal Azadmanjiri et al.
ACS APPLIED NANO MATERIALS (2020)
Engineering two-dimensional metal oxides via surface functionalization for biological applications
Baiyu Ren et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
From polystyrene waste to porous carbon flake and potential application in supercapacitor
Jiakang Min et al.
WASTE MANAGEMENT (2019)
Room temperature CO2 reduction to solid carbon species on liquid metals featuring atomically thin ceria interfaces
Dorna Esrafilzadeh et al.
NATURE COMMUNICATIONS (2019)
Approaching high-performance potassium-ion batteries via advanced design strategies and engineering
Wenchao Zhang et al.
SCIENCE ADVANCES (2019)
Emergence of Liquid Metals in Nanotechnology
Kourosh Kalantar-Zadeh et al.
ACS NANO (2019)
Sustainable polylysine conversion to nitrogen-containing porous carbon flakes: Potential application in supercapacitors
Jiakang Min et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Additive-free MXene inks and direct printing of micro-supercapacitors
Chuanfang (John) Zhang et al.
NATURE COMMUNICATIONS (2019)
General, Vertical, Three-Dimensional Printing of Two-Dimensional Materials with Multiscale Alignment
Zhiqiang Liang et al.
ACS NANO (2019)
Electronic properties of novel bismuthene nanosheets with adsorption studies of G-series nerve agent molecules - a DFT outlook
R. Bhuvaneswari et al.
PHYSICS LETTERS A (2019)
Dual-phase nanostructuring of layered metal oxides for high-performance aqueous rechargeable potassium ion microbatteries
Ying-Qi Li et al.
NATURE COMMUNICATIONS (2019)
Wafer-Sized Ultrathin Gallium and Indium Nitride Nanosheets through the Ammonolysis of Liquid Metal Derived Oxides
Nitu Syed et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Materials and Designs for Wearable Photodetectors
So Cai et al.
ADVANCED MATERIALS (2019)
2D oxides on metal materials: concepts, status, and perspectives
Giovanni Barcaro et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)
Layered and two dimensional metal oxides for electrochemical energy conversion
Michelle P. Browne et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Atomically thin two-dimensional metal oxide nanosheets and their heterostructures for energy storage
Nasir Mahmood et al.
ENERGY STORAGE MATERIALS (2019)
Colloidal nanoparticle inks for printing functional devices: emerging trends and future prospects
Minxiang Zeng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Atomically Thin Ga2S3 from Skin of Liquid Metals for Electrical, Optical, and Sensing Applications
Manal M. Y. A. Alsaif et al.
ACS APPLIED NANO MATERIALS (2019)
Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices
Yubai Zhang et al.
ACS APPLIED ELECTRONIC MATERIALS (2019)
Control of Gallium Oxide Growth on Liquid Metal Eutectic Gallium/Indium Nanoparticles via Thiolation
Zachary J. Farrell et al.
LANGMUIR (2018)
Current Status and Challenges in Printed Batteries: Toward Form Factor-Free, Monolithic Integrated Power Sources
Keun-Ho Choi et al.
ACS ENERGY LETTERS (2018)
Exploring Two-Dimensional Materials toward the Next-Generation Circuits: From Monomer Design to Assembly Control
Mengqi Zeng et al.
CHEMICAL REVIEWS (2018)
Liquid metals: fundamentals and applications in chemistry
T. Daeneke et al.
CHEMICAL SOCIETY REVIEWS (2018)
2D metal oxide nanoflakes for sensing applications: Review and perspective
A. Petra Dral et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Graphene-supported 2D transition metal oxide heterostructures
Jalal Azadmanjiri et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
An aqueous Zn-MnO2 rechargeable microbattery
Guoqiang Sun et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
2D layered organic-inorganic heterostructures for clean energy applications
Jalal Azadmanjiri et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
High-performance flexible all-solid-state aqueous rechargeable Zn-MnO2 microbatteries integrated with wearable pressure sensors
Bing He et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Two- and three-dimensional graphene-based hybrid composites for advanced energy storage and conversion devices
Jalal Azadmanjiri et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Inkjet printing of δ-MnO2 nanosheets for flexible solid-state micro-supercapacitor
Yang Wang et al.
NANO ENERGY (2018)
Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules
Yehao Deng et al.
NATURE ENERGY (2018)
Controllable Fabrication of Graphene and Related Two-Dimensional Materials on Liquid Metals via Chemical Vapor Deposition
Mengqi Zeng et al.
ACCOUNTS OF CHEMICAL RESEARCH (2018)
Printing two-dimensional gallium phosphate out of liquid metal
Nitu Syed et al.
NATURE COMMUNICATIONS (2018)
Recent Advances in Aqueous Zinc-Ion Batteries
Guozhao Fang et al.
ACS ENERGY LETTERS (2018)
Two-Dimensional Transition Metal Dichalcogenides and Metal Oxide Hybrids for Gas Sensing
Eunji Lee et al.
ACS SENSORS (2018)
Progress in 3D Printing of Carbon Materials for Energy-Related Applications
Kun Fu et al.
ADVANCED MATERIALS (2017)
Analysis of the Efficiency of Surfactant-Mediated Stabilization Reactions of EGaln Nanodroplets
Lauren R. Finkenauer et al.
LANGMUIR (2017)
Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
Daryl McManus et al.
NATURE NANOTECHNOLOGY (2017)
Facile synthesis of porous iron oxide/graphene hybrid nanocomposites and potential application in electrochemical energy storage
Jiakang Min et al.
NEW JOURNAL OF CHEMISTRY (2017)
Scalable exfoliation and dispersion of two-dimensional materials - an update
Hengcong Tao et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)
Metal oxide nanofluids: Review of formulation, thermo-physical properties, mechanisms, and heat transfer performance
K. S. Suganthi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
A liquid metal reaction environment for the room-temperature synthesis of atomically thin metal oxides
Ali Zavabeti et al.
SCIENCE (2017)
Wafer-scale two-dimensional semiconductors from printed oxide skin of liquid metals
Benjamin J. Carey et al.
NATURE COMMUNICATIONS (2017)
Holey two-dimensional transition metal oxide nanosheets for efficient energy storage
Lele Peng et al.
NATURE COMMUNICATIONS (2017)
Emerging 3D-Printed Electrochemical Energy Storage Devices: A Critical Review
Xiaocong Tian et al.
ADVANCED ENERGY MATERIALS (2017)
Liquid exfoliation of interlayer spacing-tunable 2D vanadium oxide nanosheets: High capacity and rate handling Li-ion battery cathodes
Chuanfang (John) Zhang et al.
NANO ENERGY (2017)
Self-catalyzed decomposition of discharge products on the oxygen vacancy sites of MoO3 nanosheets for low-overpotential Li-O2 batteries
Sanpei Zhang et al.
NANO ENERGY (2017)
Designing Liquid Metal Interfaces to Enable Next Generation Flexible and Reconfigurable Electronics
Nahid Ilyas et al.
ADVANCED MATERIALS INTERFACES (2017)
Liquid Metal Phagocytosis: Intermetallic Wetting Induced Particle Internalization
Jianbo Tang et al.
ADVANCED SCIENCE (2017)
Discrete Element Model for Suppression of Coffee-Ring Effect
Ting Xu et al.
SCIENTIFIC REPORTS (2017)
Gallium-Based Liquid Metal Amalgams: Transitional-State Metallic Mixtures (TransM2ixes) with Enhanced and Tunable Electrical, Thermal, and Mechanical Properties
Jianbo Tang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Wafer-Scale Synthesis of Semiconducting SnO Monolayers from Interfacial Oxide Layers of Metallic Liquid Tin
Torben Daeneke et al.
ACS NANO (2017)
3D Printing technologies for drug delivery: a review
Leena Kumari Prasad et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2016)
2D-Crystal-Based Functional Inks
Francesco Bonaccorso et al.
ADVANCED MATERIALS (2016)
Effects of surfactant on stability and thermo-physical properties of metal oxide nanofluids
M. A. Khairul et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Metal oxides for optoelectronic applications
Xinge Yu et al.
NATURE MATERIALS (2016)
Catalysis with two-dimensional materials and their heterostructures
Dehui Deng et al.
NATURE NANOTECHNOLOGY (2016)
Rate-dependent interface capture beyond the coffee-ring effect
Yanan Li et al.
SCIENTIFIC REPORTS (2016)
Nanolaminated composite materials: structure, interface role and applications
Jalal Azadmanjiri et al.
RSC ADVANCES (2016)
Two-dimensional modeling of the self-limiting oxidation in silicon and tungsten nanowires
Mingchao Liu et al.
THEORETICAL AND APPLIED MECHANICS LETTERS (2016)
Liquid-Phase Metal Inclusions for a Conductive Polymer Composite
Andrew Fassler et al.
ADVANCED MATERIALS (2015)
Exfoliated MoO3 nanosheets for high-capacity lithium storage
Huijuan Zhang et al.
ELECTROCHEMISTRY COMMUNICATIONS (2015)
An oxygen cathode with stable full discharge-charge capability based on 2D conducting oxide
Kaiming Liao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
High-Resolution Patterning of Graphene by Screen Printing with a Silicon Stencil for Highly Flexible Printed Electronics
Woo Jin Hyun et al.
ADVANCED MATERIALS (2015)
Liquid Metal/Metal Oxide Frameworks
Wei Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Break-up of Two-Dimensional MnO2 Nanosheets Promotes Ultrasensitive pH-Triggered Theranostics of Cancer
Yu Chen et al.
ADVANCED MATERIALS (2014)
Mixed Transition-Metal Oxides: Design, Synthesis, and Energy-Related Applications
Changzhou Yuan et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
Two dimensional nanomaterials for flexible supercapacitors
Xu Peng et al.
CHEMICAL SOCIETY REVIEWS (2014)
Development of MnO2 cathode inks for flexographically printed rechargeable zinc-based battery
Zuoqian Wang et al.
JOURNAL OF POWER SOURCES (2014)
Facile synthesis of reduced graphene oxide/WO3 nanoplates composites with enhanced photocatalytic activity
Bo Chai et al.
MATERIALS LETTERS (2014)
Two dimensional α-MoO3 nanoflakes obtained using solvent-assisted grinding and sonication method: Application for H2 gas sensing
Manal M. Y. A. Alsaif et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Generalized self-assembly of scalable two-dimensional transition metal oxide nanosheets
Ziqi Sun et al.
NATURE COMMUNICATIONS (2014)
Two dimensional TiO2 nanosheets: in vivo toxicity investigation
Sha-Sha Song et al.
RSC ADVANCES (2014)
Facile room temperature methods for growing ultra thin films of graphene nanosheets, nanoparticulate tin oxide and preliminary assessment of graphene-tin oxide stacked layered composite structure for supercapacitor application
Sagar Patil et al.
RSC ADVANCES (2014)
A review on hybrid nanolaminate materials synthesized by deposition techniques for energy storage applications
Jalal Azadmanjiri et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Ambient hydrolysis deposition of TiO2 in nanoporous carbon and the converted TiN-carbon capacitive electrode
Xingfeng Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Two-dimensional heterostructures of V2O5 and reduced graphene oxide as electrodes for high energy density asymmetric supercapacitors
D. H. Nagaraju et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
被撤回的出版物: Black mesoporous anatase TiO2 nanoleaves: a high capacity and high rate anode for aqueous Al-ion batteries (Publication with Expression of Concern. See vol. 7, pg. 2922, 2019) (Retracted article. See vol. 7, pg. 20443, 2019)
Ying Juan He et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Recovery of Nonwetting Characteristics by Surface Modification of Gallium-Based Liquid Metal Droplets Using Hydrochloric Acid Vapor
Daeyoung Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Quantifying Thiol Ligand Density of Self-Assembled Monolayers on Gold Nanoparticles by Inductively Coupled Plasma-Mass Spectrometry
Helmut Hinterwirth et al.
ACS NANO (2013)
Thermodynamic investigations of (Bi+Ni) system - Part II
Renu Agarwal et al.
JOURNAL OF CHEMICAL THERMODYNAMICS (2013)
Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage
Maher F. El-Kady et al.
NATURE COMMUNICATIONS (2013)
Flexible asymmetric supercapacitors based on ultrathin two-dimensional nanosheets with outstanding electrochemical performance and aesthetic property
Shan Shi et al.
SCIENTIFIC REPORTS (2013)
Inkjet-Printed Graphene Electronics
Felice Torrisi et al.
ACS NANO (2012)
Inkjet Printing High-Resolution, Large-Area Graphene Patterns by Coffee-Ring Lithography
Lei Zhang et al.
ADVANCED MATERIALS (2012)
Tuning suspension rheology using capillary forces
Erin Koos et al.
SOFT MATTER (2012)
Highly Flexible, Printed Alkaline Batteries Based on Mesh-Embedded Electrodes
Abhinav M. Gaikwad et al.
ADVANCED MATERIALS (2011)
Directing Substrate Morphology via Self-Assembly: Ligand-Mediated Scission of Gallium-Indium Microspheres to the Nanoscale
J. Nathan Hohman et al.
NANO LETTERS (2011)
Wolfgang von Ohnesorge
Gareth H. McKinley et al.
PHYSICS OF FLUIDS (2011)
Graphene Analogues of BN: Novel Synthesis and Properties
Angshuman Nag et al.
ACS NANO (2010)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Self-organization of ink-jet-printed triisopropylsilylethynyl pentacene via evaporation-induced flows in a drying droplet
Jung Ah Lim et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Marangoni effect reverses coffee-ring depositions
H Hu et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2006)
Viscosity effect on GaInSn studied by XPS
F Scharmann et al.
SURFACE AND INTERFACE ANALYSIS (2004)
Surface layering of liquids: The role of surface tension
O Shpyrko et al.
PHYSICAL REVIEW B (2004)
Share Paper
