Related references
Note: Only part of the references are listed.Numerical analysis of the back interface for high efficiency wide band gap chalcopyrite solar cells
Weimin Li et al.
SOLAR ENERGY (2019)
Effect of thickness and post deposition annealing temperature on the structural and optical properties of thermally evaporated molybdenum oxide films
Dibya Jyoti Borah et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2019)
In-situ fabrication of MoO3 nanobelts decorated with MoO2 nanoparticles and their enhanced photocatalytic performance
Qingyang Xi et al.
APPLIED SURFACE SCIENCE (2019)
Passivation of Deep-Level Defects by Cesium Fluoride Post-Deposition Treatment for Improved Device Performance of Cu(In,Ga)Se2 Solar Cells
Hojin Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Electrical, optical and surface characterization of reactive RF magnetron sputtered molybdenum oxide films for solar cell applications
Haris Mehmood et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2019)
Cd-Free Cu(In,Ga)(Se,S)2 Thin-Film Solar Cell With Record Efficiency of 23.35%
Motoshi Nakamura et al.
IEEE JOURNAL OF PHOTOVOLTAICS (2019)
Improving the Open Circuit Voltage through Surface Oxygen Plasma Treatment and 11.7% Efficient Cu2ZnSnSe4 Solar Cell
Hitoshi Tampo et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Two-stage method to enhance the grain size of Cu(In,Ga)Se-2 absorbers based on sputtering quaternary Cu(In,Ga)Se-2 target
Peng Xiao et al.
MATERIALS LETTERS (2018)
Effect of post-annealing on the properties of thermally evaporated molybdenum oxide films: Interdependence of work function and oxygen to molybdenum ratio
Baichao Han et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2018)
Adjustment of alkali element incorporations in Cu(In,Ga)Se-2 thin films with wet chemistry Mo oxide as a hosting reservoir
Shuping Lin et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
The effect of thermal evaporated MoO3 intermediate layer as primary back contact for kesterite Cu2ZnSnS4 solar cells
Jongsung Park et al.
THIN SOLID FILMS (2018)
The Role of Hydrogen from ALD-Al2O3 in Kesterite Cu2ZnSnS4 Solar Cells: Grain Surface Passivation
Jongsung Park et al.
ADVANCED ENERGY MATERIALS (2018)
Understanding the cell-to-module efficiency gap in Cu(In,Ga) (S,Se)(2) photovoltaics scale-up
Veronica Bermudez et al.
NATURE ENERGY (2018)
Improving the lateral homogeneity of Cu(In, Ga)Se-2 layers fabricated by RF magnetron sputtering from a quaternary ceramic target
Linquan Zhang et al.
CERAMICS INTERNATIONAL (2018)
Formation of MoOx barrier layer under atmospheric based condition to control MoSe2 formation in CIGS thin film solar cell
Kam Hoe Ong et al.
MATERIALS TECHNOLOGY (2018)
Multi-layer strategy to enhance the grain size of CIGS thin film fabricating by single quaternary CIGS target
Xiao Peng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Nanoscopic study of the compositions, structures, and electronic properties of grain boundaries in Cu(InGa)Se2 photovoltaic thin films
Wenjie Li et al.
NANO ENERGY (2017)
Annealing effect on physical properties of evaporated molybdenum oxide thin films for ethanol sensing
S. Touihri et al.
APPLIED SURFACE SCIENCE (2017)
CIGS absorber preparation by non-vacuum particle-based screen printing and RTA densification
Hsiu-Po Kuo et al.
APPLIED ENERGY (2016)
Effects of Mo surface oxidation on Cu(In, Ga)Se2 solar cells fabricated by three-stage process with KF postdeposition treatment
Yukiko Kamikawa et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2016)
Cu(In,Ga)Se2 solar cells fabricated by sputtering from copper-poor and selenium-rich ceramic target with selenium-free post treatment
Liangqi Ouyang et al.
MATERIALS LETTERS (2016)
Effects of heavy alkali elementsin Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%
Philip Jackson et al.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2016)
The oxidation effect of a Mo back contact on Cu(In,Ga)(Se,S)2 thin-film solar modules
Junggyu Nam et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Structure evolution in reactively sputtered molybdenum oxide thin films
Julia M. Pachlhofer et al.
VACUUM (2016)
The importance of back contact modification in Cu2ZnSnSe4 solar cells: The role of a thin MoO2 layer
S. Lopez-Marino et al.
NANO ENERGY (2016)
Surface Passivation of MoO3 Nanorods by Atomic Layer Deposition toward High Rate Durable Li Ion Battery Anodes
B. Ahmed et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Cu(In,Ga)Se-2 solar cell with 16.7% active-area efficiency achieved by sputtering from a quaternary target
Liangqi Ouyang et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2015)
A Temporary Barrier Effect of the Alloy Layer During Selenization: Tailoring the Thickness of MoSe2 for Efficient Cu2ZnSnSe4 Solar Cells
Jianjun Li et al.
ADVANCED ENERGY MATERIALS (2015)
Deposition of binary, ternary and quaternary metal selenide thin films from diisopropyldiselenophosphinato-metal precursors
Sumera Mahboob et al.
JOURNAL OF CRYSTAL GROWTH (2014)
Employing Si solar cell technology to increase efficiency of ultra-thin Cu(In, Ga)Se2 solar cells
Bart Vermang et al.
PROGRESS IN PHOTOVOLTAICS (2014)
The recombination parameter J0
Andres Cuevas
PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS (SILICONPV 2014) (2014)
Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells
Adrian Chirila et al.
NATURE MATERIALS (2013)
Electrical impact of MoSe2 on CIGS thin-film solar cells
Kuo-Jui Hsiao et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Optimization of MoSe2 formation for Cu(In,Ga)Se2-based solar cells by using thin superficial molybdenum oxide barrier layers
A. Duchatelet et al.
THIN SOLID FILMS (2013)
Solution Processed MoO3 Interfacial Layer for Organic Photovoltaics Prepared by a Facile Synthesis Method
Seiichiro Murase et al.
ADVANCED MATERIALS (2012)
Growth of thin films of molybdenum oxide by atomic layer deposition
Madeleine Diskus et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Accurate Band Gaps for Semiconductors from Density Functional Theory
Hai Xiao et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)
n-Type Transition Metal Oxide as a Hole Extraction Layer in PbS Quantum Dot Solar Cells
Jianbo Gao et al.
NANO LETTERS (2011)
Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films
Adrian Chirila et al.
NATURE MATERIALS (2011)
Effects of residual copper selenide on CuInGaSe2 solar cells
Tung-Po Hsieh et al.
SOLID-STATE ELECTRONICS (2011)
Effect of oxygen partial pressure on the structural and optical properties of dc reactive magnetron sputtered molybdenum oxide films
V. Nirupama et al.
CURRENT APPLIED PHYSICS (2010)
Electronic structure of anode interface with molybdenum oxide buffer layer
Kaname Kanai et al.
ORGANIC ELECTRONICS (2010)
Grain boundaries in Cu(In, Ga)(Se, S)2 thin-film solar cells
Uwe Rau et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)
Ordered Mesoporous Metallic MoO2 Materials with Highly Reversible Lithium Storage Capacity
Yifeng Shi et al.
NANO LETTERS (2009)
Properties of oxygen sites at the MoO3(010) surface:: density functional theory cluster studies and photoemission experiments
R Tokarz-Sobieraj et al.
SURFACE SCIENCE (2001)
Electrical properties of the Cu(In,Ga)Se2/MoSe2/Mo structure
N Kohara et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2001)
Share Paper
