Related references
Note: Only part of the references are listed.Low viscosity metakaolinite based geopolymer binders
Petr Koutnik et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Formulation of an alkali-activated grout based on Callovo-Oxfordian argillite for an application in geological radioactive waste disposal
C. Dupuy et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Metakaolin-based geopolymer beads: Production methods and characterization
Valentina Medri et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Properties of one-part geopolymer incorporating wollastonite as partial replacement of geopolymer precursor or sand
Shin Hau Bong et al.
MATERIALS LETTERS (2020)
Influence of the wollastonite and glass fibers on geopolymer composites workability and mechanical properties
J. Archez et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
High strength inorganic-organic polymer composites (IOPC) manufactured by mold pressing of geopolymers
Shunfeng Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Metakaolin-based geopolymer: Formation of new phases influencing the setting time with the use of additives
C. Dupuy et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Reuse of mining waste as aggregates in fly ash-based geopolymers
I. Capasso et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Geopolymer synthetized using reactive or unreactive aluminosilicate. understanding of reactive mixture
M. Arnoult et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Efficiency of Different Superplasticizers and Retarders on Properties of 'One-Part' Fly Ash-Slag Blended Geopolymers with Different Activators
Shin Hau Bong et al.
MATERIALS (2019)
Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
Shin Hau Bong et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Ductility of 3D printed concrete reinforced with short straight steel fibers
F. P. Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Suvash Chandra Paul et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
Sarah Al-Qutaifi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of surface moisture on inter-layer strength of 3D printed concrete
Jay G. Sanjayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
How to control the geopolymer setting time with the alkaline silicate solution
M. Arnoult et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)
Thermal resistance of argillite-based alkali-activated materials. Part 1: Effect of calcination processes and alkali cation
Colin Dupuy et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
Effective mechanical reinforcement of inorganic polymers using glass fibre waste
Rui M. Novais et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Direct ink writing of geopolymeric inks
Giorgia Franchin et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
Low carbon building: Experimental insight on the use of fly ash and glass fibre for making geopolymer concrete
Thangaraj Sathanandam et al.
SUSTAINABLE ENVIRONMENT RESEARCH (2017)
Workability Enhancement of Geopolymer Concrete through The Use of Retarder
B. Sri Umniati et al.
GREEN CONSTRUCTION AND ENGINEERING EDUCATION FOR SUSTAINABLE FUTURE (2017)
Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger
Erwin Mairitsch et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Feasibility of producing geopolymer binder based on a brick clay mixture
Julie Peyne et al.
CERAMICS INTERNATIONAL (2017)
The Brittleness and Chemical Stability of Optimized Geopolymer Composites
Michaela Steinerova et al.
MATERIALS (2017)
The microstructural and mechanical properties of geopolymer composites containing glass microfibres
Thamer Alomayri
CERAMICS INTERNATIONAL (2017)
Durability performances of wollastonite, tremolite and basalt fiber-reinforced metakaolin geopolymer composites under sulfate and chloride attack
Daming Ren et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study
Ahmet B. Kizilkanat et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Effect of the reactivity of alkaline solution and metakaolin on geopolymer formation
A. Gharzouni et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)
THERMAL EFFECT ON FLEXURAL STRENGTH OF GEOPOLYMER MATRIX COMPOSITE WITH ALUMINA AND WOLLASTONITE AS FILLERS
Dwi Marta Nurjaya et al.
INTERNATIONAL JOURNAL OF TECHNOLOGY (2015)
Rheological characterization of fly ash-based suspensions
M. Romagnoli et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Strategies to control the high temperature shrinkage of fly ash based geopolymers
Les Vickers et al.
THERMOCHIMICA ACTA (2014)
Properties of Fresh and Hardened Glass Fiber Reinforced Fly Ash Based Geopolymer Concrete
Behzad Nematollahi et al.
ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II (2014)
Role of the silica source on the geopolymerization rate: A thermal analysis study
A. Autef et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2013)
Properties of waste-based geopolymer building blocks
Fenghui Huang et al.
ARCHITECTURE, BUILDING MATERIALS AND ENGINEERING MANAGEMENT, PTS 1-4 (2013)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Feasibility of manufacturing geopolymer bricks using circulating fluidized bed combustion bottom ash
Chen Chen et al.
ENVIRONMENTAL TECHNOLOGY (2012)
Effect of Natural Wollastonite Microfibers on Early-Age Behavior of UHPC
A. M. Soliman et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Thermal properties of spray-coated geopolymer-type compositions
J. Temuujin et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Rheology of fiber reinforced cementitious materials: classification and prediction
Laetitia Martinie et al.
CEMENT AND CONCRETE RESEARCH (2010)
Investigations on Pastes and Mortars of Ordinary Portland Cement Admixed with Wollastonite and Microsilica
G. D. Ransinchung et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2010)
Workability and strength of coarse high calcium fly ash geopolymer
P. Chindaprasirt et al.
CEMENT & CONCRETE COMPOSITES (2007)
Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing
T Bakharev
CEMENT AND CONCRETE RESEARCH (2006)
Short fiber reinforced geopolymer composites manufactured by extrusion
ZJ Li et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2005)
Fibre reinforcement and fracture response in geopolymeric mortars
FJ Silva et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2003)
The geopolymerisation of alumino-silicate minerals
H Xu et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2000)
Share Paper
