Related references
Note: Only part of the references are listed.Experimental and numerical approach to study mechanical and fracture properties of high-density polyethylene carbon nanotubes composite
Gaurav Arora et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Tensile properties of carbon nanotubes reinforced aluminum matrix composites: A review
M. Jagannatham et al.
CARBON (2020)
Development of Metal Matrix Composites and Nanocomposites Via Double-Pressing Double-Sintering (DPDS) Method
S. A. A. Alem et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Extremely large oscillation and nonlinear frequency of a multi-scale hybrid disk resting on nonlinear elastic foundation
Ali Shariati et al.
THIN-WALLED STRUCTURES (2020)
Effects of carbon nanotubes on open-hole carbon fiber reinforced polymer composites
Kang-ning Han et al.
MATERIALS TODAY COMMUNICATIONS (2020)
A multi-scale finite element approach to mechanical performance of polyurethane/CNT nanocomposite foam
Mehdi Javid et al.
MATERIALS TODAY COMMUNICATIONS (2020)
The key role of processing in tuning nonlinear viscoelastic properties and microwave absorption in CNT-based polymer nanocomposites
Milad Kamkar et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Microstructure and Mechanical Properties of MWCNT/Ti6Al4V Composites Consolidated by Vacuum Sintering
Doan Dinh Phuong et al.
SCIENCE OF SINTERING (2020)
Forced Axial Vibration of a Single-Walled Carbon Nanotube Embedded in Elastic Medium under Various Moving Forces
Farshad Khosravi et al.
JOURNAL OF NANO RESEARCH (2020)
Microstructure, Mechanical Properties and Machinability Studies of Al7075/SiC/h-BN Hybrid Nanocomposite Fabricated via Ultrasonic-assisted Squeeze Casting
Sourabh Kumar Soni et al.
FME TRANSACTIONS (2020)
Properties and behavior of carbon nanomaterials when interfacing neuronal cells: How far have we come?
Rossana Rauti et al.
CARBON (2019)
Morphological, electrical, mechanical and thermal properties of high-density polyethylene/multiwall carbon nanotube nanocomposites: effect of aspect ratio
Tuba Evgin et al.
MATERIALS RESEARCH EXPRESS (2019)
Tailoring and characterization of carbon nanotube dispersity in CNT/6061Al composites
Malin Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
A review on the production of metal matrix composites through stir casting - Furnace design, properties, challenges, and research opportunities
Ramanathan Arunachalam et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Introducing bone-shaped carbon nanotubes to reinforce polymer nanocomposites: A molecular dynamics investigation
Georgios Giannopoulos
MATERIALS TODAY COMMUNICATIONS (2019)
Nanoindentation studies of the mechanical behaviours of spark plasma sintered multiwall carbon nanotubes reinforced Ti6Al4V nanocomposites
Avwerosuoghene Moses Okoro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Dry sliding wear behaviour of multi walled carbon nanotubes reinforced aluminium composites produced by powder metallurgy technique
H. T. Shivaramu et al.
MATERIALS RESEARCH EXPRESS (2019)
Regulation of interface between carbon nanotubes-aluminum and its strengthening effect in CNTs reinforced aluminum matrix nanocomposites
Xin Zhang et al.
CARBON (2019)
Influence of TiO2 and MWCNT nanoparticles dispersion on microstructure and mechanical properties of Al6061 matrix hybrid nanocomposites
Sourabh Kumar Soni et al.
MATERIALS RESEARCH EXPRESS (2019)
Alumina-MWCNT composites: microstructural characterization and mechanical properties
Nidhi Sharma et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2019)
Recent advances in the use of carbon nanotubes as smart biomaterials
Beatriz Rossi Canuto de Menezes et al.
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Structural, mechanical and corrosion properties of CNT-304 stainless steel nanocomposites
A. Radhamani et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2019)
Fabrication and machinability analysis of squeeze cast Al 7075/h-BN/graphene hybrid nanocomposite
Parakh Agarwal et al.
ENGINEERING RESEARCH EXPRESS (2019)
Mechanisms and applications of carbon nanotubes in terahertz devices: A review
Ruiqian Wang et al.
CARBON (2018)
Densification, hardness and tribological characteristics of MWCNTs reinforced Ti6Al4V compacts consolidated by spark plasma sintering
Adewale Oladapo Adegbenjo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Improvement of interfacial interaction and mechanical properties in copper matrix composites reinforced with copper coated carbon nanotubes
Hu Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Synthesis of carbon nanomaterials from different pyrolysis techniques: a review
Muhammad Umer Zahid et al.
MATERIALS RESEARCH EXPRESS (2018)
CNT-reinforced metal and steel nanocomposites: A comprehensive assessment of progress and future directions
A. V. Radhamani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
A review on electrochemically modified carbon nanotubes (CNTs) membrane for desalination and purification of water
Zaira Zaman Chowdhury et al.
MATERIALS RESEARCH EXPRESS (2018)
Mechanical and Tribological Behavior of Multiwalled Carbon Nanotubes-Reinforced AA7075 Composites Prepared by Powder Metallurgy and Hot Extrusion
M. Jagannatham et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Collagen/aminated MWCNTs nanocomposites for biomedical applications
Ali Nabipour Chakoli et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Dispersion of pristine and polyaniline functionalized carbon nanotubes in designed solvent mixtures by Hansen solubility parameters
Jing Ma et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Fabrication and mechanical properties of CNTs/Mg composites prepared by combining friction stir processing and ultrasonic assisted extrusion
Junhao Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Mechanical properties and microstructure characterization of well-dispersed carbon nanotubes reinforced copper matrix composites
Hui Deng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites
Xiaoqing Liu et al.
MATERIALS CHARACTERIZATION (2017)
Novel synthesizing and characterization of copper matrix composites reinforced with carbon nanotubes
Hu Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and mechanical properties of carbon nanotubes reinforced titanium matrix composites fabricated via spark plasma sintering
Khurram S. Munir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Physicomechanical properties of spark plasma sintered carbon nanotube-reinforced metal matrix nanocomposites
Abolfazl Azarniya et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Carbon nanotube synthesis via the catalytic chemical vapor deposition of methane in the presence of iron, molybdenum, and iron-molybdenum alloy thin layer catalysts
Arash Yahyazadeh et al.
RESULTS IN PHYSICS (2017)
Copper matrix composites reinforced by aligned carbon nanotubes: Mechanical and tribological properties
Zixin Huang et al.
MATERIALS & DESIGN (2017)
Influence of carbon nano tubes on mechanical, metallurgical and tribological behavior of magnesium nanocomposites
S. T. Selvamani et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2017)
Improvement of modulus, strength and fracture toughness of CNT/Epoxy nanocomposites through the functionalization of carbon nanotubes
Jaemin Cha et al.
COMPOSITES PART B-ENGINEERING (2017)
Multifunctional polymer composites reinforced by carbon nanotubes-Alumina hybrids with urchin-like structure
Delong He et al.
MATERIALS TODAY COMMUNICATIONS (2017)
Balanced strength and ductility in CNT/A1 composites achieved by flake powder metallurgy via shift-speed ball milling
Run Xu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Corrosion behaviour of Aluminium Metal Matrix reinforced with Multi-wall Carbon Nanotube
P. S. Samuel Ratna Kumar et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)
Boron- and nitrogen-doped single-walled carbon nanohorns with graphite-like thin sheets prepared by CO2 laser ablation method
Ryota Yuge et al.
CARBON (2017)
Effect of different nano-carbon reinforcements on microstructure and properties of TiO2 composites prepared by spark plasma sintering
B. Debalina et al.
CERAMICS INTERNATIONAL (2016)
Synthesis and modification of carbon nanomaterials via AC arc and dielectric barrier discharge plasma
D. L. Sun et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Carbon nanotube-reinforced aluminum composite produced by induction melting
Muhammad Mansoor et al.
Journal of Applied Research and Technology (2016)
Synthesis of carbon nanotubes by catalytic chemical vapour deposition: A review on carbon sources, catalysts and substrates
Khurshed A. Shah et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2016)
Polymer Nanocomposites-A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Mrinal Bhattacharya
MATERIALS (2016)
Sustained arc temperature: better marker for phase transformation of carbon black to multiwalled carbon nanotubes in arc discharge method
Neha Arora et al.
MATERIALS RESEARCH EXPRESS (2016)
Fabrication of CNT/Al composites with low damage to CNTs by a novel solution-assisted wet mixing combined with powder metallurgy processing
Z. Y. Liu et al.
MATERIALS & DESIGN (2016)
Carbon nanotube/alumina and graphite/alumina composite coatings on stainless steel for tribological applications
Karim Hentour et al.
MATERIALS TODAY COMMUNICATIONS (2016)
Fabrication of copper/single-walled carbon nanotube composite film with homogeneously dispersed nanotubes by electroless deposition
Susumu Arai et al.
MATERIALS TODAY COMMUNICATIONS (2016)
Carbon nanotube functionalized with dodecylamine for the effective dispersion in solvents
Filipe Vargas Ferreira et al.
APPLIED SURFACE SCIENCE (2015)
Carbon nanomaterials synthesized by arc discharge hot plasma
Yanjie Su et al.
CARBON (2015)
Influence of dispersion/mixture time on mechanical properties of Al-CNTs nanocomposites
Sonia Simoes et al.
COMPOSITE STRUCTURES (2015)
Synthesis of thin bundled single walled carbon nanotubes and nanohorn hybrids by arc discharge technique in open air atmosphere
Joseph A. Berkmans et al.
DIAMOND AND RELATED MATERIALS (2015)
Microstructure and mechanical behavior of copper coated multiwall carbon nanotubes reinforced aluminum composites
M. Jagannatham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Synthesis of CNT-reinforced AZ31 magnesium alloy composites with uniformly distributed CNTs
Guoqiang Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Synthesis of carbon nanotubes by the laser ablation method: Effect of laser wavelength
Justyna Chrzanowska et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2015)
Synthesis of single-walled carbon nanotubes by low-frequency bipolar pulsed arc discharge method
Kazi Hanium Maria et al.
VACUUM (2015)
Nonlinear vibration properties of a zigzag single-walled carbon nanotube embedded in a polymer matrix
Abderrahmane Besseghier et al.
ADVANCES IN NANO RESEARCH (2015)
Carbon nanotube web-based current collectors for high-performance lithium ion batteries
Si-Jin Kim et al.
MATERIALS TODAY COMMUNICATIONS (2015)
Growth of small diameter multi-walled carbon nanotubes by arc discharge process
K. T. Chaudhary et al.
CHINESE PHYSICS B (2014)
Improved dispersion of carbon nanotubes in aluminum nanocomposites
Sonia Simoes et al.
COMPOSITE STRUCTURES (2014)
Multiscale fiber-reinforced thermoplastic composites incorporating carbon nanotubes: A review
Ana M. Diez-Pascual et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2014)
Arc discharge synthesis of carbon nanotubes: Comprehensive review
Neha Arora et al.
DIAMOND AND RELATED MATERIALS (2014)
Microstructure and mechanical properties of CNT/Ag nanocomposites fabricated by spark plasma sintering
Walid M. Daoush et al.
JOURNAL OF EXPERIMENTAL NANOSCIENCE (2014)
An overview on methods for the production of carbon nanotubes
N. M. Mubarak et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)
Mechanical behavior of ultrafine-grained Ni-carbon nanotube composite
Jonathan Nguyen et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Tensile Strength and Electrical Conductivity of Carbon Nanotube Reinforced Aluminum Matrix Composites Fabricated by Powder Metallurgy Combined with Friction Stir Processing
Z. Y. Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Carbon nanotubes: properties, synthesis, purification, and medical applications
Ali Eatemadi et al.
NANOSCALE RESEARCH LETTERS (2014)
Metal Matrix Composites Reinforced by Nano-Particles-A Review
Riccardo Casati et al.
METALS (2014)
Current understanding of the growth of carbon nanotubes in catalytic chemical vapour deposition
Vincent Jourdain et al.
CARBON (2013)
Morphology and tensile properties of PMMA carbon nanotubes nanocomposites and nanocomposites foams
Changchun Zeng et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Effect of carbon nanotubes with different lengths on mechanical and electrical properties of silica-filled styrene butadiene rubber compounds
Suk Moon Park et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)
Corrosion protection by epoxy coating containing multi-walled carbon nanotubes
HaeRi Jeon et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)
Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing
Qiang Liu et al.
MATERIALS & DESIGN (2013)
Using hydrocarbon as a carbon source for synthesis of carbon nanotube by electric field induced needle-pulsed plasma
Kaveh Kazemi Kia et al.
THIN SOLID FILMS (2013)
Controlling the growth of single-walled carbon nanotubes on surfaces using metal and non-metal catalysts
Guo Hong et al.
CARBON (2012)
Effect of ball-milling time on mechanical properties of carbon nanotubes reinforced aluminum matrix composites
Z. Y. Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
The thermal effect on vibration of zigzag single walled carbon nanotubes using nonlocal Timoshenko beam theory
Mohamed Zidour et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Thermal Conductance of Buckled Carbon Nanotubes
Fumio Nishimura et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2012)
Carbon nanotube synthesis: from large-scale production to atom-by-atom growth
Catherine Journet et al.
NANOTECHNOLOGY (2012)
Carbon nanotubes, science and technology part (I) structure, synthesis and characterisation
Ahmad Aqel et al.
ARABIAN JOURNAL OF CHEMISTRY (2012)
One-Step Synthesis of Metal-Encapsulated Carbon Nanotubes by Pulsed Arc Discharge in Water
Kentaro Takekoshi et al.
E-JOURNAL OF SURFACE SCIENCE AND NANOTECHNOLOGY (2012)
Synthesis of single-walled carbon nanotubes with selective diameter distributions using DC arc discharge under CO mixed atmosphere
Yanjie Su et al.
APPLIED SURFACE SCIENCE (2011)
Effects of different carbon precursors on synthesis of multiwall carbon nanotubes: Purification and Functionalization
Yaser Shirazi et al.
APPLIED SURFACE SCIENCE (2011)
Effect of functionalization on the thermo-mechanical and electrical behavior of multi-wall carbon nanotube/epoxy composites
L. Guadagno et al.
CARBON (2011)
Evaluating the characteristics of multiwall carbon nanotubes
John H. Lehman et al.
CARBON (2011)
The production of carbon nanotubes using two-stage chemical vapor deposition and their potential use in protein purification
N. M. Mubarak et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Recent Progress on the Growth Mechanism of Carbon Nanotubes: A Review
Jean-Philippe Tessonnier et al.
CHEMSUSCHEM (2011)
The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites
A. M. K. Esawi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Carbon nanotube-polymer interactions in nanocomposites: A review
Meysam Rahmat et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Methods for carbon nanotubes synthesis-review
Jan Prasek et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Carbon Nanostructures Production by AC Arc Discharge Plasma Process at Atmospheric Pressure
Shenqiang Zhao et al.
JOURNAL OF NANOMATERIALS (2011)
Viscoelastic and mechanical properties of multi walled carbon nanotube/epoxy composites with different nanotube content
Arash Montazeri et al.
MATERIALS & DESIGN (2011)
Catalytic pyrolysis of polypropylene to synthesize carbon nanotubes and hydrogen through a two-stage process
Jie Liu et al.
POLYMER DEGRADATION AND STABILITY (2011)
Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use
Jinzhi Liao et al.
POWDER TECHNOLOGY (2011)
A review of the preparation and properties of carbon nanotubes-reinforced polymer compositess
Fan-Long Jin et al.
Carbon Letters (2011)
Investigating the Outskirts of Fe and Co Catalyst Particles in Alumina-Supported Catalytic CVD Carbon Nanotube Growth
Mark H. Ruemmeli et al.
ACS NANO (2010)
Recent Developments in Multifunctional Nanocomposites Using Carbon Nanotubes
Jacob M. Wernik et al.
APPLIED MECHANICS REVIEWS (2010)
Coupled process of plastics pyrolysis and chemical vapor deposition for controllable synthesis of vertically aligned carbon nanotube arrays
Zhou Yang et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2010)
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Peng-Cheng Ma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
CNT reinforced light metal composites produced by melt stirring and by high pressure die casting
Qianqian Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Mechanical properties of multi-walled carbon nanotube/epoxy composites
Arash Montazeri et al.
MATERIALS & DESIGN (2010)
Analysis and measurement of carbon nanotube dispersions: nanodispersion versus macrodispersion
Micah J. Green
POLYMER INTERNATIONAL (2010)
Polymer nanocomposites based on functionalized carbon nanotubes
Nanda Gopal Sahoo et al.
PROGRESS IN POLYMER SCIENCE (2010)
Carbon nanotube-polymer composites: Chemistry, processing, mechanical and electrical properties
Zdenko Spitalsky et al.
PROGRESS IN POLYMER SCIENCE (2010)
Synthesis Methods of Carbon Nanotubes and Related Materials
Andrea Szabo et al.
MATERIALS (2010)
Functionalized Few-Walled Carbon Nanotubes for Mechanical Reinforcement of Polymeric Composites
Ye Hou et al.
ACS NANO (2009)
Dimensional control of multi-walled carbon nanotubes in floating-catalyst CVD synthesis
Gregg S. B. McKee et al.
CARBON (2009)
Improved processing of carbon nanotube/magnesium alloy composites
Qianqian Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Masterbatch-based multi-walled carbon nanotube filled polypropylene nanocomposites: Assessment of rheological and mechanical properties
K. Prashantha et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process
Walid M. Daoush et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Modification of Carbon Nanotubes and Its Effect on Properties of Carbon Nanotube/Epoxy Nanocomposites
Zdenko Spitalsky et al.
POLYMER COMPOSITES (2009)
Synthesis and Characterization of Multiwalled Carbon Nanotubes-Polymethyl Methacrylate Composites Prepared by In Situ Polymerization Method
Shailaja Pande et al.
POLYMER COMPOSITES (2009)
Polymer Nanocomposites with a Uniform Distribution of Nanoparticles in a Polymer Matrix Synthesized by the Frontal Polymerization Technique
S. P. Davtyan et al.
NANOTECHNOLOGIES IN RUSSIA (2009)
Conversion of semiconducting behavior of carbon nanotubes using ball milling
Peng Cheng Ma et al.
CHEMICAL PHYSICS LETTERS (2008)
Functionalization of multi-wall carbon nanotubes with silane and its reinforcement on polypropylene composites
Zhen Zhou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
A novel method to produce carbon nanotubes using EDM process
Y. Y. Tsai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Molecular dynamics of diffusive-ballistic heat conduction in single-walled carbon nanotubes
Junichiro Shiomi et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2008)
Fabrication, Purification, and Characterization of Double-Wall Carbon Nanotubes via Pulsed Arc Discharge
Hirornichi Yoshida et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2008)
Fabrication and mechanical properties of well-dispersed multiwalled carbon nanotubes/epoxy composites
Peng Guo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
High-yield synthesis of single-walled carbon nanotubes with a pulsed arc-discharge technique
Aljoscha Roch et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2007)
Mechanical reinforcement of polyethylene using polyethylene-grafted multiwalled carbon nanotubes
Bing-Xing Yang et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Study on polycarbonate/multi-walled carbon nanotubes composite produced by melt processing
Li Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Dispersion and mechanical properties of polypropylene/multiwall carbon nanotubes composites obtained via dynamic packing injection molding
Yan Xiao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Production of small single-wall carbon nanohorns by CO2 laser ablation of graphite in Ne-gas atmosphere
Takeshi Azami et al.
CARBON (2007)
CVD synthesis and purification of single-walled carbon nanotubes using silica-supported metal catalyst
R. Engel-Herbert et al.
MATERIALS LETTERS (2007)
Dynamic observations of the effect of pressure and temperature conditions on the selective synthesis of carbon nanotubes
Renu Sharma et al.
NANOTECHNOLOGY (2007)
Incorporation of carbon nanotubes into polyethylene by high energy ball milling: Morphology and physical properties
Giuliana Gorrasi et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2007)
Strong carbon-nanotube fibers spun from long carbon-nanotube arrays
Xiefei Zhang et al.
SMALL (2007)
Polypropylene as a carbon source for the synthesis of multi-walled carbon nanotubes via catalytic combustion
Zhiwei Jiang et al.
CARBON (2007)
Solid state growth mechanisms for carbon nanotubes
Peter J. F. Harris
CARBON (2007)
Experimental investigation of nanoparticle dispersion by beads milling with centrifugal bead separation
Mitsugi Inkyo et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2006)
Room-temperature deposition of carbon nanomaterials by excimer laser ablation
G. Radhakrishnan et al.
THIN SOLID FILMS (2006)
The thermal and mechanical properties of a polyurethane/multi-walled carbon nanotube composite
Jiawen Xiong et al.
CARBON (2006)
Nanocomposite fiber systems processed from fluorinated single-walled carbon nanotubes and a polypropylene matrix
Daneesh McIntosh et al.
CHEMISTRY OF MATERIALS (2006)
Measurement of the thermal conductivity of individual carbon nanotubes by the four-point three-ω method
Tae-Youl Choi et al.
NANO LETTERS (2006)
In situ synthesis of super-long Cu nanowires inside carbon nanotubes with coal as carbon source
Zhiyu Wang et al.
CARBON (2006)
Small but strong: A review of the mechanical properties of carbon nanotube-polymer composites
Jonathan N. Coleman et al.
CARBON (2006)
Carbon nanotube growth on cobalt-sprayed substrates by then-nal CVD
E. Terrado et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
Nanotube deposition in a continuous arc reactor for varying arc gap and substrate temperature
Hamdan M. Yusoff et al.
CURRENT APPLIED PHYSICS (2006)
Production of carbon nanoonions and nanotubes using an intermittent arc discharge in water
K Imasaka et al.
THIN SOLID FILMS (2006)
Recent advances in laser synthesis of single-walled carbon nanotubes
CT Kingston et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2006)
Enhancement of interfacial adhesion and dynamic mechanical properties of poly(methyl methacrylate)/multiwalled carbon nanotube composites with amine-terminated poly(ethylene oxide)
M Wang et al.
CARBON (2006)
Buckling of single-walled carbon nanotubes upon bending: Molecular dynamics simulations and finite element method
GX Cao et al.
PHYSICAL REVIEW B (2006)
Inexpensive, upscalable nanotube growth methods
ZE Horváth et al.
CURRENT APPLIED PHYSICS (2006)
Catalytic chemical vapor deposition preparation of multi-wall carbon nanotubes with cone-like heads
A Eftekhari et al.
CHEMISTRY LETTERS (2006)
Thermal conductance of an individual single-wall carbon nanotube above room temperature
E Pop et al.
NANO LETTERS (2006)
Control of the properties of carbon nanotubes synthesized by CVD for application in electrochemical biosensors
I Bustero et al.
MICROCHIMICA ACTA (2006)
Preparation and mechanical properties of chitosan/carbon nanotubes composites
SF Wang et al.
BIOMACROMOLECULES (2005)
Thermal conductance and thermopower of an individual single-wall carbon nanotube
CH Yu et al.
NANO LETTERS (2005)
Measuring the thermal conductivity of a single carbon nanotube
M Fujii et al.
PHYSICAL REVIEW LETTERS (2005)
Synthesis of high quality single-walled carbon nanotubes at large scale by electric arc using metal compounds
X Lv et al.
CARBON (2005)
Rapid production of carbon nanotubes by high-power laser ablation
WP Jiang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2005)
Measurement of thermal conductivity of individual multiwalled carbon nanotubes by the 3-ω method -: art. no. 013108
TY Choi et al.
APPLIED PHYSICS LETTERS (2005)
Synthesis of carbon nanotubes by arc discharge in sodium chloride solution
SD Wang et al.
CARBON (2005)
Length dependence of carbon nanotube thermal conductivity and the problem of long waves
N Mingo et al.
NANO LETTERS (2005)
Synthesis of single wall carbon nanotubes by using arc discharge technique in nitrogen atmosphere
Y Makita et al.
EUROPEAN PHYSICAL JOURNAL D (2005)
Unusual morphologies of carbon nanoparticles obtained by arc discharge in delonized water
SD Wang et al.
CARBON (2005)
Single phase MgMoO4 as catalyst for the synthesis of bundled multi-wall carbon nanotubes by CVD
Y Li et al.
CARBON (2005)
Study on the preparation and characterization of ultra-high molecular weight polyethylene-carbon nanotubes composite fiber
YP Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Corrosion behavior of carbon nanotubes - Ni composite coating
XH Chen et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Electrical conductivity of chemically modified multiwalled carbon nanotube/epoxy composites
YJ Kim et al.
CARBON (2005)
Synthesis of multiwalled carbon nanotubes by catalytic combustion of polypropylene
T Tang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2005)
Generation of single-walled carbon nanotubes from alcohol and generation mechanism by molecular dynamics simulations
S Maruyama et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2004)
Laser ablation process for single-walled carbon nanotube production
S Arepalli
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2004)
Characterization of carbon nanotubes produced by arc discharge: Effect of the background pressure
EI Waldorff et al.
JOURNAL OF APPLIED PHYSICS (2004)
Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene
O Meincke et al.
POLYMER (2004)
Carbon nanotube composites
PJF Harris
INTERNATIONAL MATERIALS REVIEWS (2004)
Growth of high-quality single-wall carbon nanotubes without amorphous carbon formation
RG Lacerda et al.
APPLIED PHYSICS LETTERS (2004)
Growing carbon nanotubes
Yoshinori Ando et al.
MATERIALS TODAY (2004)
Thermal conductivity of Y-junction carbon nanotubes
A Cummings et al.
PHYSICAL REVIEW B (2004)
Catalytic synthesis of single-walled carbon nanotubes from coal gas by chemical vapor deposition method
JS Qiu et al.
FUEL PROCESSING TECHNOLOGY (2004)
Preparation of polypropylene/carbon nanotube composite powder with a solid-state mechanochemical pulverization process
HS Xia et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Water-Assisted Highly Efficient Synthesis of Impurity-Free Single-Walled Carbon Nanotubes
K Hata et al.
SCIENCE (2004)
Investigation on preparation of multiwalled carbon nanotubes by DC arc discharge under N-2 atmosphere
S Cui et al.
CARBON (2004)
Low-temperature single-wall carbon nanotube synthesis by thermal chemical vapor deposition
HW Liao et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2004)
Carbon nanotube-reinforced epoxy-compo sites:: enhanced stiffness and fracture toughness at low nanotube content
FH Gojny et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Single-pulse arc production of carbon nanotubes in ambient air
N Parkansky et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2004)
Ultralong single-wall carbon nanotubes
LX Zheng et al.
NATURE MATERIALS (2004)
Effect on the growth of carbon nanotubes and optical emission spectroscopy in short-period arc-discharge
M Nishio et al.
THIN SOLID FILMS (2004)
Improving the dispersion and integration of single-walled carbon nanotubes in epoxy composites through functionalization
J Zhu et al.
NANO LETTERS (2003)
Simplified synthesis of double-wall carbon nanotubes
J Cumings et al.
SOLID STATE COMMUNICATIONS (2003)
High-yield production of single-wall carbon nanotubes in nitrogen gas
D Nishide et al.
CHEMICAL PHYSICS LETTERS (2003)
The effect of laser power on the formation of carbon nanotubes prepared in CO2 continuous wave laser ablation at room temperature
HY Zhang et al.
PHYSICA B-CONDENSED MATTER (2003)
Gram-scale CCVD synthesis of double-walled carbon nanotubes
E Flahaut et al.
CHEMICAL COMMUNICATIONS (2003)
Multiwall carbon nanotubes: Synthesis and application
R Andrews et al.
ACCOUNTS OF CHEMICAL RESEARCH (2002)
Thermal conductivity of multiwalled carbon nanotubes
DJ Yang et al.
PHYSICAL REVIEW B (2002)
Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes
BG Demczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Effects of nanotube waviness on the modulus of nanotube-reinforced polymers
FT Fisher et al.
APPLIED PHYSICS LETTERS (2002)
Nucleation of polypropylene crystallization by single-walled carbon nanotubes
BP Grady et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2002)
Large-scale production of single-walled carbon nanotubes using ultrafast pulses from a free electron laser
PC Eklund et al.
NANO LETTERS (2002)
A novel CW laser-powder method of carbon single-wall nanotubes production
AP Bolshakov et al.
DIAMOND AND RELATED MATERIALS (2002)
Effect of laser intensity on yield and physical characteristics of single wall carbon nanotubes produced by the Nd : YAG laser vaporization method
N Braidy et al.
CARBON (2002)
Thermal properties of carbon nanotubes and nanotube-based materials
J Hone et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2002)
Mechanical properties of carbon nanotube by molecular dynamics simulation
ZH Yao et al.
COMPUTATIONAL MATERIALS SCIENCE (2001)
Thermal transport measurements of individual multiwalled nanotubes
P Kim et al.
PHYSICAL REVIEW LETTERS (2001)
Formation and Raman spectroscopy of single wall carbon nanotubes synthesized by CO2 continuous laser vaporization
H Zhang et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2001)
Self-assembling of hot carbon nanoparticles observed by short pulse-arc-discharge
Y Murooka et al.
CHEMICAL PHYSICS LETTERS (2001)
Growth mechanisms for single-wall carbon nanotubes in a laser-ablation process
CD Scott et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2001)
Production of short carbon nanotubes with open tips by ball milling
N Pierard et al.
CHEMICAL PHYSICS LETTERS (2001)
Small diameter carbon nanotubes synthesized in an arc-discharge
YB Li et al.
CARBON (2001)
Double-walled carbon nanotubes fabricated by a hydrogen arc discharge method
JL Hutchison et al.
CARBON (2001)
Synthesis of single-wall carbon nanotubes by millisecond-pulsed CO2 laser vaporization at room temperature
F Kokai et al.
CHEMICAL PHYSICS LETTERS (2000)
Tensile strength of single-walled carbon nanotubes directly measured from their macroscopic ropes
F Li et al.
APPLIED PHYSICS LETTERS (2000)
Nucleation and growth of carbon nanotubes by microwave plasma chemical vapor deposition
C Bower et al.
APPLIED PHYSICS LETTERS (2000)
Electrical and thermal transport properties of magnetically aligned single walt carbon nanotube films
J Hone et al.
APPLIED PHYSICS LETTERS (2000)
Dispersion of metal nanoparticles for aligned carbon nanotube arrays
H Ago et al.
APPLIED PHYSICS LETTERS (2000)
Mechanical and physical properties on carbon nanotube
SS Xie et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2000)
Reversible electromechanical characteristics of carbon nanotubes under local-probe manipulation
TW Tombler et al.
NATURE (2000)
Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties
MF Yu et al.
PHYSICAL REVIEW LETTERS (2000)
Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites
D Qian et al.
APPLIED PHYSICS LETTERS (2000)
Production of fullerenes and single-wall carbon nanotubes by high-temperature pulsed arc discharge
T Sugai et al.
JOURNAL OF CHEMICAL PHYSICS (2000)
Controlled production of single-wall carbon nanotubes by catalytic decomposition of CO on bimetallic Co-Mo catalysts
B Kitiyanan et al.
CHEMICAL PHYSICS LETTERS (2000)
Large-scale synthesis of single-wall carbon nanotubes by catalytic chemical vapor deposition (CCVD) method
JF Colomer et al.
CHEMICAL PHYSICS LETTERS (2000)
Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load
MF Yu et al.
SCIENCE (2000)
Cas and pressure effects on the production of single-walled carbon nanotubes by laser ablation
E Munoz et al.
CARBON (2000)
Share Paper
