Related references
Note: Only part of the references are listed.A compendious review on lack-of-fusion in digital concrete fabrication
Jacques Kruger et al.
ADDITIVE MANUFACTURING (2021)
Mesh reinforcing method for 3D Concrete Printing
Taylor Marchment et al.
AUTOMATION IN CONSTRUCTION (2020)
Agent based modeling to optimize workflow of robotic steel and concrete 3D printers
AbdAllah Abou Yassin et al.
AUTOMATION IN CONSTRUCTION (2020)
Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: Experiments and molecular dynamics studies
Li Wang et al.
CEMENT & CONCRETE COMPOSITES (2020)
3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse
Jacques Kruger et al.
COMPOSITES PART B-ENGINEERING (2020)
Effect of the printing method and mortar's workability on pull-out strength of 3D printed elements
Bilal Baz et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
3D printing of a post-tensioned concrete girder designed by topology optimization
Gieljan Vantyghem et al.
AUTOMATION IN CONSTRUCTION (2020)
Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions
Zhijian Li et al.
COMPOSITES PART B-ENGINEERING (2020)
Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance
Luong Pham et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Victor C. Li et al.
CEMENT AND CONCRETE RESEARCH (2020)
Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach
Yiwei Weng et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2019)
Material characteristics of binder jet 3D printed hydrated CSA cement with the addition of fine aggregates
Joseph Ingaglio et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
Biranchi Panda et al.
MATERIALS (2019)
Digital Concrete: A Review
Timothy Wangler et al.
CEMENT AND CONCRETE RESEARCH (2019)
An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
Jacques Kruger et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Guowei Ma et al.
MATERIALS LETTERS (2019)
Time gap effect on bond strength of 3D-printed concrete
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
Alternative Reinforcements for Digital Concrete Construction
Viktor Mechtcherine et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Ductility of 3D printed concrete reinforced with short straight steel fibers
F. P. Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2019)
A self-reinforced cementitious composite for building-scale 3D printing
Daniel G. Soltan et al.
CEMENT & CONCRETE COMPOSITES (2018)
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rethinking reinforcement for digital fabrication with concrete
Domenico Asprone et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
The role of early age structural build-up in digital fabrication with concrete
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
Biranchi Panda et al.
CERAMICS INTERNATIONAL (2018)
Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
Jian Hui Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D printing of reinforced concrete elements: Technology and design approach
Domenico Asprone et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D-printed steel reinforcement for digital concrete construction - Manufacture, mechanical properties and bond behaviour
Viktor Mechtcherine et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of surface moisture on inter-layer strength of 3D printed concrete
Jay G. Sanjayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments
A. S. J. Suiker
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study
Alexandre Pierre et al.
MATERIALS AND STRUCTURES (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
A review of 3D concrete printing systems and materials properties: current status and future research prospects
Suvash Chandra Paul et al.
RAPID PROTOTYPING JOURNAL (2018)
Particle-bed 3D printing in concrete construction - Possibilities and challenges
Dirk Lowke et al.
CEMENT AND CONCRETE RESEARCH (2018)
Vision of 3D printing with concrete - Technical, economic and environmental potentials
Geert De Schutter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A holistic review of off-site construction literature published between 2008 and 2018
Ruoyu Jin et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
3D printing trends in building and construction industry: a review
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Babak Zareiyan et al.
AUTOMATION IN CONSTRUCTION (2017)
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
A. Perrot et al.
MATERIALS AND STRUCTURES (2016)
A critical review of the use of 3-D printing in the construction industry
Peng Wu et al.
AUTOMATION IN CONSTRUCTION (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
Multi-scale interaction potentials (F-r) for describing fracture of brittle disordered materials like cement and concrete
Jan G. M. van Mier
INTERNATIONAL JOURNAL OF FRACTURE (2007)
Share Paper
