Related references
Note: Only part of the references are listed.Deformation characteristics and mechanism of deep subsize coal pillar of the tilted stratum
Hai Wu et al.
ENERGY SCIENCE & ENGINEERING (2020)
Cooperative load-bearing characteristics of a pillar group and a gob pile in partially caved areas at shallow depth
Defu Zhu et al.
ENERGY SCIENCE & ENGINEERING (2020)
Failure mechanism of the large-section roadway under mined zones in the ultra-thick coal seam and its control technology
Yang Tai et al.
ENERGY SCIENCE & ENGINEERING (2020)
Failure analysis and control mechanism of gob-side entry retention with a 1.7-m flexible-formwork concrete wall: A case study
Shengrong Xie et al.
ENGINEERING FAILURE ANALYSIS (2020)
Energy Dissipation and Storage in Underground Mining Operations
Xiangjian Dong et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
The Influences of Key Strata Compound Breakage on the Overlying Strata Movement and Strata Pressure Behavior in Fully Mechanized Caving Mining of Shallow and Extremely Thick Seams: A Case Study
Junmeng Li et al.
ADVANCES IN CIVIL ENGINEERING (2019)
An innovative approach for gob-side entry retaining in deep coal mines: A case study
Deyuan Fan et al.
ENERGY SCIENCE & ENGINEERING (2019)
Field and numerical investigations of gateroad system failure under an irregular residual coal pillar in close-distance coal seams
Hefu Shang et al.
ENERGY SCIENCE & ENGINEERING (2019)
Study on Three-Dimensional Stress Field of Gob-Side Entry Retaining by Roof Cutting without Pillar under Near-Group Coal Seam Mining
Xiaoming Sun et al.
PROCESSES (2019)
Analysis of Overburden Structure and Pressure-Relief Effect of Hard Roof Blasting and Cutting
Hao Liu et al.
ADVANCES IN CIVIL ENGINEERING (2019)
Deformation Characteristics and Determination of Optimum Supporting Time of Alteration Rock Mass in Deep Mine
Weijian Yu et al.
KSCE JOURNAL OF CIVIL ENGINEERING (2019)
A physical and numerical investigation of sudden massive roof collapse during longwall coal retreat mining
Hongpu Kang et al.
INTERNATIONAL JOURNAL OF COAL GEOLOGY (2018)
Rapid Excavation and Stability Control of Deep Roadways for an Underground Coal Mine with High Production in Inner Mongolia
Zhengzheng Xie et al.
SUSTAINABILITY (2018)
Stability of Close Chambers Surrounding Rock in Deep and Comprehensive Control Technology
Weijian Yu et al.
ADVANCES IN CIVIL ENGINEERING (2018)
A Mechanical Model of the Overlying Rock Masses in Undersea Coal Mining and a Stress-Seepage Coupling Numerical Simulation
Jie Fang et al.
ADVANCES IN CIVIL ENGINEERING (2018)
Failure Mechanism for Surrounding Rock of Deep Circular Roadway in Coal Mine Based on Mining-Induced Plastic Zone
Yue Yuan et al.
ADVANCES IN CIVIL ENGINEERING (2018)
Structural characteristics of strata overlying of a fully mechanized longwall face: a case study
J. Wang et al.
JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2018)
Geotechnical considerations for concurrent pillar recovery in close-distance multiple seams
Peter Zhang et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2018)
A physical and numerical model-based research on the subsidence features of overlying strata caused by coal mining in Henan, China
Xingsheng Zhang et al.
ENVIRONMENTAL EARTH SCIENCES (2017)
In Situ Investigations on Failure Evolution of Overlying Strata Induced by Mining Multiple Coal Seams
Y. L. Tan et al.
GEOTECHNICAL TESTING JOURNAL (2017)
Rock burst assessment in multi-seam mining: a case study
Wei Shen et al.
ARABIAN JOURNAL OF GEOSCIENCES (2017)
Stability of goaf-side entry driving in 800-m-deep island longwall coal face in underground coal mine
Deyu Qian et al.
ARABIAN JOURNAL OF GEOSCIENCES (2016)
Numerical investigation of coal pillar failure under simultaneous static and dynamic loading
Shui-Li Wang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)
An innovative approach for gob-side entry retaining in highly gassy fully-mechanized longwall top-coal caving
Zizheng Zhang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
Numerical Modeling for Yield Pillar Design: A Case Study
Wenfeng Li et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
Numerical Simulation of Squeezing Failure in a Coal Mine Roadway due to Mining-Induced Stresses
Fuqiang Gao et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
Engineering cases and characteristics of deviatoric stress under coal pillar in regional floor
Xu Lei et al.
ROCK AND SOIL MECHANICS (2015)
Evolution and effect of the stress concentration and rock failure in the deep multi-seam coal mining
Mingwei Zhang et al.
ENVIRONMENTAL EARTH SCIENCES (2014)
Modeling multiple coal seams using signed distance functions and global kriging
Clayton V. Deutsch et al.
INTERNATIONAL JOURNAL OF COAL GEOLOGY (2013)
An innovative approach for gateroad layout in highly gassy longwall top coal caving
Shuai Yan et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)
Numerical Investigation of the Dynamic Mechanical State of a Coal Pillar During Longwall Mining Panel Extraction
Hongwei Wang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2013)
Stability of the parting between coal pillar workings in level contiguous seams during depillaring
Raghwendra Singh et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2012)
Analysis of stability of coal pillars with multi-coal seam strip mining
Li-ya ZHANG et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
The influence of roadway backfill on the coal pillar strength by numerical investigation
Hongwei Wang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
Using the Vulnerable Index Method to Assess the Likelihood of a Water Inrush through the Floor of a Multi-seam Coal Mine in China
Wu Qiang et al.
MINE WATER AND THE ENVIRONMENT (2011)