Related references
Note: Only part of the references are listed.Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools
Alexey Vereschaka et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Investigation of multicomponent nanolayer coatings based on nitrides of Cr, Mo, Zr, Nb, and Al
Sergey Grigoriev et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Investigation of performance and cutting properties of carbide tool with nanostructured multilayer Zr-ZrN-(Zr0.5,Cr0.3,Al0.2)N coating
Alexey Vereschaka et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Investigation of wear dynamics for cutting tools with multilayer composite nanostructured coatings in turning constructional steel
Alexey Vereschaka et al.
WEAR (2019)
Effect of adhesion and the wear-resistant layer thickness ratio on mechanical and performance properties of ZrN - (Zr,Al,Si)N coatings
Alexey Vereschaka et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Structure and Microporosity of Ion-Plasma Condensed Coatings Deposited from a Two-Phase Vacuum-Arc Discharge Plasma Flow Containing Evaporated Material Microdroplets
S. A. Muboyadzhyan et al.
RUSSIAN METALLURGY (2019)
Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life
Alexey Vereschaka et al.
TRIBOLOGY INTERNATIONAL (2018)
Nano-scale multi-layered coatings for improved efficiency of ceramic cutting tools
Alexey A. Vereschaka et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Working efficiency of cutting tools with multilayer nano-structured Ti-TiCN-(Ti,Al)CN and Ti-TiCN-(Ti,Al,Cr)CN coatings: Analysis of cutting properties, wear mechanism and diffusion processes
Alexey A. Vereschaka et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Thermodynamic modelling of Ti-Zr-N system
Soumya Sridar et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2017)
Wear behaviour of wear-resistant adaptive nano-multilayered Ti-Al-Mo-N coatings
V. S. Sergevnin et al.
APPLIED SURFACE SCIENCE (2016)
Effects of gas pressure on microstructure and performance of (Ti, Al, Zr) N coatings produced by physical vapor deposition
Wei Liu et al.
CERAMICS INTERNATIONAL (2016)
Effects of bias voltage on microstructure, mechanical properties, and wear mechanism of novel quaternary (Ti, Al, Zr)N coating on the surface of silicon nitride ceramic cutting tool
Wei Liu et al.
CERAMICS INTERNATIONAL (2016)
Phase Formation in the Ti-Al-Mo-N System during the Growth of Adaptive Wear-Resistant Coatings by Arc PVD
V. S. Sergevnin et al.
INORGANIC MATERIALS (2016)
NUMERICAL SIMULATION OF PILEUP PROCESS INMETAL MICRODROPLET DEPOSITION MANUFACTURE
Jun Du et al.
JOURNAL OF ENHANCED HEAT TRANSFER (2016)
Effect of Bias Potential on the Structure and Distribution of Elements in Titanium-Nitride Coatings Obtained by Cathodic-Arc Deposition
E. B. Kashkarov et al.
JOURNAL OF SURFACE INVESTIGATION (2016)
Effect of Mo content on the structure and mechanical properties of TiAlMoN films deposited on WC-Co cemented carbide substrate by magnetron sputtering
Ke Yang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Role of the thermal factor in the wear mechanism of ceramic tools. Part 2: Microlevel
V. V. Kuzin et al.
JOURNAL OF FRICTION AND WEAR (2015)
Mechanical, Microstructural and Tribological Properties of Reactive Magnetron Sputtered Cr-Mo-N Films
Dongli Qi et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Effect of Titanium Nitride Coating on Stress Structural Inhomogeneity in Oxide-Carbide Ceramic. Part 4. Action of Heat Flow
M. A. Volosova et al.
REFRACTORIES AND INDUSTRIAL CERAMICS (2015)
TiAlN based wear resistant coatings modified by molybdenum addition
Lukasz Tomaszewski et al.
VACUUM (2015)
Equipment for Deposition of Thin Metallic Films Bombarded by Fast Argon Atoms
A. Metel et al.
INSTRUMENTS AND EXPERIMENTAL TECHNIQUES (2014)
Nano-scale multilayered-composite coatings for the cutting tools
A. A. Vereshchaka et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Tribological characteristics of (TiZrHfVNbTa)N coatings applied using the vacuum arc deposition method
S. N. Grigoriev et al.
JOURNAL OF FRICTION AND WEAR (2014)
Effect of a TiC Coating on the Stress-Strain State of a Plate of a High-Density Nitride Ceramic Under Nonsteady Thermoelastic Conditions
V. V. Kuzin et al.
REFRACTORIES AND INDUSTRIAL CERAMICS (2014)
Development of Assisted Filtered Cathodic Vacuum Arc Deposition of Nano-Dispersed Multi-Layered Composite Coatings on Cutting Tools
Vereschaka Alexey
PRECISION MACHINING VII (2014)
Source of metal atoms and fast gas molecules for coating deposition on complex shaped dielectric products
A. Metel et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Improvement of working efficiency of cutting tools by modifying its surface properties by application of wear-resistant complexes
Vereschaka Alexey
ADVANCES IN MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-4 (2013)
Broad beam sources of fast molecules with segmented cold cathodes and emissive grids
A. S. Metel et al.
INSTRUMENTS AND EXPERIMENTAL TECHNIQUES (2012)
Modelling impingement of hollow metal droplets onto a flat surface
Arvind Kumar et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2012)
The effect of deposition parameters of multilayered nanostructure Ti-Al-N/Zr-Nb-N/Cr-N coatings obtained by the arc-PVD method on their structure and composition
I. V. Blinkov et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2012)
Properties of coatings based on Cr, Ti, and Mo nitrides with embedded metals deposited on cutting tools
A. K. Kuleshov et al.
JOURNAL OF FRICTION AND WEAR (2011)
Temperature activated self-lubrication in CrN/Mo2N nanolayer coatings
Robin Abraham Koshy et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Zr-Nb-N hard coatings deposited by high power pulsed sputtering using different pulse modes
H. Klostermann et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Characterization of Ti-Zr-N films deposited by cathodic vacuum arc with different substrate bias
E. W. Niu et al.
APPLIED SURFACE SCIENCE (2008)
Structural and mechanical stability upon annealing of arc-deposited Ti-Zr-N coatings
V. V. Uglov et al.
SURFACE & COATINGS TECHNOLOGY (2008)
A numerical investigation on the influence of liquid properties and interfacial heat transfer during microdroplet deposition onto a glass substrate
Rajneesh Bhardwaj et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Syntheses and mechanical properties of Cr-Mo-N coatings by a hybrid coating system
Kwang Ho Kim et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Influence substrate temperature on structural properties of TiN/TiC bilayers produced by pulsed arc techniques
A. Devia et al.
VACUUM (2006)
Evaluation of the thermal stability of reactively sputtered (Ti, Zr)Nx nano-thin films as diffusion barriers between Cu and silicon
YL Kuo et al.
THIN SOLID FILMS (2005)
Structural characterization and mechanical properties of Ti-Zr-N coatings, deposited by vacuum arc
VV Uglov et al.
SURFACE & COATINGS TECHNOLOGY (2004)
On quantifying interfacial thermal resistance and surface energy during molten microdroplet surface deposition
D Attinger et al.
ATOMIZATION AND SPRAYS (2003)
Broad fast neutral molecule beam sources for industrial-scale beam-assisted deposition
S Grigoriev et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Magnetron sputtered Cr-Ni-N and Ti-Mo-N films: comparison of mechanical properties
F Regent et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Synthesis of (Ti, Zr)N hard coatings by unbalanced magnetron sputtering
DY Wang et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Spatial distribution of microdroplets generated in the cathode spots of vacuum arcs
K Miernik et al.
SURFACE & COATINGS TECHNOLOGY (2000)
Share Paper
