The Impact of Fungicides, Plasma, UV-Additives and Weathering on the Adhesion Strength of Acrylic and Alkyd Coatings to the Norway Spruce Wood

The adhesion strength between the transparent acrylic or alkyd coatings and the Norway spruce (Picea abies Karst L.) wood was determined by EN ISO 4624 and analyzed concerning four variables: (a) fungicidal pre-treatment of wood with boric acid or benzalkonium chloride, (b) cold plasma modification of wood surfaces, (c) presence of hindered amine light stabilizer (HALS) or hydroxyphenyl-benzotriazoles (BTZ) in the role of UV-additives in coatings, and (d) weathering of coated wood-lasting 1 week in Xenotest by a modified EN 927-6, or 14, 28 and 42 weeks outdoors at 45 degrees by EN 927-3. In the un-weathered state, the adhesion strength was positively affected by the initial plasma modification of wood surfaces, more evident with the application of acrylic water-borne coatings. On the contrary, the adhesion strength was not influenced by the fungicidal pre-treatment of wood and by the UV-additive's presence in coatings. The adhesion was negatively affected by weathering-exponentially outdoor-irrespective of the fungicidal pre-treatment of wood, the plasma modification of wood surfaces, the coating type, and the presence of UV-additive in coatings.