Related references
Note: Only part of the references are listed.Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing
Binayak Sen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
Sustainable milling of Ti-6Al-4V: A trade-off between energy efficiency, carbon emissions and machining characteristics under MQL and cryogenic environment
Muhammad Jamil et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti-6Al-4V alloy
Munish Kumar Gupta et al.
TRIBOLOGY INTERNATIONAL (2021)
Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti-6Al-4V titanium alloy: Cryogenic versus wet machining
Chetan Agrawal et al.
TRIBOLOGY INTERNATIONAL (2021)
Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
Murat Sarikaya et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills
Jinyang Xu et al.
COMPOSITE STRUCTURES (2020)
Chip formation and hole quality in dry drilling additive manufactured Ti6Al4V
Weiwei Ming et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Effect of material microstructure on tool wear behavior during machining additively manufactured Ti6Al4V
Jiaqiang Dang et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)
Cutting responses of additive manufactured Ti6Al4V with solid ceramic tool under dry high-speed milling processes
Heng Zhang et al.
CERAMICS INTERNATIONAL (2020)
Effect of liquid nitrogen cooling on surface integrity in cryogenic milling of Ti-6Al-4 V titanium alloy
Wei Zhao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Influence of CO2-snow and subzero MQL on thermal aspects in the machining of Ti-6Al-4V
Muhammad Jamil et al.
APPLIED THERMAL ENGINEERING (2020)
Milling of Ti-6Al-4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining
Muhammad Jamil et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy
Munish Kumar Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Effects of high-pressure coolant on cutting performance of high-speed ultrasonic vibration cutting titanium alloy
Zhenghui Lu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy
Rupinder Singh et al.
TRIBOLOGY INTERNATIONAL (2020)
Manufacturing Processes of Integral Blade Rotors for Turbomachinery, Processes and New Approaches
Haizea Gonzalez-Barrio et al.
APPLIED SCIENCES-BASEL (2020)
On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review
Peirong Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Machining performance evaluation of Ti6Al4V alloy with laser textured tools under MQL and nano-MQL environments
Sarvesh Kumar Mishra et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Experimental investigation on drilling machinability and hole quality of CFRP/Ti6Al4V stacks under different cooling conditions
Jinyang Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Progress for sustainability in the mist assisted cooling techniques: a critical review
Gurraj Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
The manufacturing and the application of polycrystalline diamond tools - A comprehensive review
Guangxian Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
CO2 cryogenic milling of Inconel 718: cutting forces and tool wear
Octavio Pereira et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Tool wear and machined surface characteristics in side milling Ti6Al4V under dry and supercritical CO2 with MQL conditions
Qinglong An et al.
TRIBOLOGY INTERNATIONAL (2020)
Assessment of jojoba as a pure and nano-fluid base oil in minimum quantity lubrication (MQL) hard-turning of Ti-6Al-4V: A step towards sustainable machining
Gaurav Gaurav et al.
JOURNAL OF CLEANER PRODUCTION (2020)
A comparative machinability study on titanium alloy Ti-6Al-4V during dry turning by cryogenic treated and untreated condition of uncoated WC inserts
Upendra Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Influence of single and dual cryogenic jets on machinability characteristics in turning of Ti-6Al-4V
Mozammel Mia et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2019)
Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti-6Al-4V
Muhammad Jamil et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms
Gurraj Singh et al.
MATERIALS (2019)
Sensitivity Analysis of Tool Wear in Drilling of Titanium Aluminides
Aitor Beranoagirre et al.
METALS (2019)
Ecological trends in machining as a key factor in sustainable production - A review
G. M. Krolczyk et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids
Kishor Kumar Gajrani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Influence of characteristic properties of PCD grades on the wear development in turning of β-titanium alloy (Ti5Al5V5Mo3Cr)
M. Ibrahim Sadik et al.
WEAR (2019)
Determination of Johnson-Cook Constitutive Parameters for Cutting Simulations
Michael Storchak et al.
METALS (2019)
Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks
Jinyang Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Investigation of Tool Wear and Chip Morphology in Dry Trochoidal Milling of Titanium Alloy Ti-6Al-4V
Dongsheng Liu et al.
MATERIALS (2019)
Role of textured tool in improving machining performance: A review
Priya Ranjan et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy
Alborz Shokrani et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Evaluation of machinability and economic performance in cryogenic-assisted hard turning of α-β titanium: a step towards sustainable manufacturing
Muhammad Jamil et al.
MACHINING SCIENCE AND TECHNOLOGY (2019)
Investigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks
Jinyang Xu et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
On the interpretation of drilling CFRP/Ti6Al4V stacks using the orthogonal cutting method: Chip removal mode and subsurface damage formation
Jinyang Xu et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Influence of graphene-enriched nanofluids and textured tool on machining behavior of Ti-6Al-4V alloy
Rupinder Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Sustainable Lubrication Methods for the Machining of Titanium Alloys: An Overview
Enrique Garcia-Martinez et al.
MATERIALS (2019)
Evaluation of Performance of Various Coolant Grades When Turning Ti-6Al-4V Alloy With Uncoated Carbide Tools Under High-Pressure Coolant Supplies
Emmanuel O. Ezugwu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Recent Advances in the Machining of Titanium Alloys using Minimum Quantity Lubrication (MQL) Based Techniques
Salman Pervaiz et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)
Experimental and numerical study of chip formation in orthogonal cutting of Ti-5553 alloy: the influence of cryogenic, MQL, and high pressure coolant supply
Yusuf Kaynak et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Application of ultrasonic vibration assisted MQL in grinding of Ti-6Al-4V
Rajeshkumar Madarkar et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Process parameter optimization and experimental evaluation for nanofluid MQL in grinding Ti-6Al-4V based on grey relational analysis
Guotao Liu et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study
Sezer Morkavuk et al.
COMPOSITES PART B-ENGINEERING (2018)
Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy
Matthew S. Dargusch et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy
Mozammel Mia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effect of nozzle angle and depth of cut on grinding titanium under cryogenic CO2
J. Elanchezhian et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Drilling Process in γ-TiAl Intermetallic Alloys
Aitor Beranoagirre et al.
MATERIALS (2018)
Mono-objective and multi-objective optimization of performance parameters in high pressure coolant assisted turning of Ti-6Al-4V
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Performance prediction of high-pressure coolant assisted turning of Ti-6Al-4V
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Analyzing machining parameters for commercially puretitanium (Grade 2), cooled using minimum quantity lubrication assisted by a Ranque-Hilsch vortex tube
GurRaj Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Sustainable machining of titanium alloys: A critical review
Kapil Gupta et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Analysis of local cutting edge geometry on temperature distribution and surface integrity when dry drilling of aeronautical alloys
G. Le Coz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Application of cutting fluids in machining of titanium alloys-a review
Rukmini Srikant Revuru et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V
Xiaoliang Liang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Surface integrity and tool life when turning of Ti-6Al-4V with coolant applied by different methods
Rosemar B. Da Silva et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Study of surface roughness and cutting forces using ANN, RSM, and ANOVA in turning of Ti-6Al-4V under cryogenic jets applied at flank and rake faces of coated WC tool
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Investigation on performance characteristics in drilling of Ti6Al4V alloy
Zhaoju Zhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Dry machining: A step towards sustainable machining - Challenges and future directions
Gyanendra Singh Goindi et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Environmentally friendly drilling of intermetallic titanium aluminide at different aspect ratio
Nithin Tom Mathew et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Experimental investigation on the feasibility of dry and cryogenic machining as sustainable strategies when turning Ti6A14V produced by Additive Manufacturing
A. Bordin et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Microstructural Analysis of Machined Surface Integrity in Drilling a Titanium Alloy
Nilesh Varote et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Internal cryolubrication approach for Inconel 718 milling
O. Pereira et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)
Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL)
Kyung-Hee Park et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2017)
The effect of cutting fluids applied in metal cutting process
Pei Yan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Cryogenic manufacturing processes
I. S. Jawahir et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V)
Salman Pervaiz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304
O. Pereira et al.
JOURNAL OF CLEANER PRODUCTION (2016)
被撤回的出版物: Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques (Retracted article. See vol. 391, 2023)
Munish Kumar Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Recent advances in turning with textured cutting tools: A review
Varun Sharma et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Assessment of cooling-lubrication and wettability characteristics of nano-engineered sunflower oil as cutting fluid and its impact on SQCL grinding performance
K. ManojKumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Multiresponse optimization of cryogenic drilling on Ti-6Al-4V alloy using topsis method
L. Shakeel Ahmed et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Modeling concepts for intermetallic titanium aluminides
F. Appel et al.
PROGRESS IN MATERIALS SCIENCE (2016)
Drilling of titanium aluminide at different aspect ratio under dry and wet conditions
Nithin Tom Mathew et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti-6Al-4V titanium alloy
Alborz Shokrani et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Cryogenic Drilling of Ti-6Al-4V Alloy Under Liquid Nitrogen Cooling
L. Shakeel Ahmed et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Influence of cryogenic cooling on tool wear and chip formation in turning of titanium alloy
Ampara Aramcharoen
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Influence of coolant flow rate on tool life and wear development in cryogenic and wet milling of Ti-6Al-4V
M. Ibrahim Sadik et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
High performance cutting of advanced aerospace alloys and composite materials
Rachid M'Saoubi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Effects of cutting parameters on dry machining Ti-6Al-4V alloy with ultra-hard tools
F. J. Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Wear mechanisms of WC-10Ni3Al carbide tool in dry turning of Ti6Al4V
Liang Liang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2015)
Grinding titanium Ti-6Al-4V alloy with electroplated cubic boron nitride wheel under cryogenic cooling
J. Elanchezhian et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Influence of High-Pressure Coolant Assistance on the Machinability of the Titanium Alloy Ti555-3
Tarek Braham-Bouchnak et al.
MACHINING SCIENCE AND TECHNOLOGY (2015)
Influence of cutting speed and tool wear on the surface integrity of the titanium alloy Ti-1023 during milling
Yang Houchuan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Surface integrity characterization in high-speed dry end milling of Ti-6Al-4V titanium alloy
H. Safari et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
A Review on Minimum Quantity Lubrication for Machining Processes
Vishal S. Sharma et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
Enhanced Machinability of Ti-5553 Alloy from Cryogenic Machining: Comparison with MQL and Flood-cooled Machining and Modeling
Y. Sun et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Characterization of deformation induced surface hardening during cryogenic turning of AISI 347
Jan C. Aurich et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy
G. Rotella et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Advantages of milling and drilling Ti-6Al-4V components with high-pressure coolant
M. J. Bermingham et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Environmental friendly cutting fluids and cooling techniques in machining: a review
Sujan Debnath et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Wear behavior and cutting performance of CrAlSiN and TiAlSiN hard coatings on cemented carbide cutting tools for Ti alloys
Yin-Yu Chang et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Tool wear patterns when turning of titanium alloy using sustainable lubrication strategies
Syed Waqar Raza et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2014)
Analysis of Lubrication Strategies for Sustainable Machining during Turning of Titanium Ti-6Al-4V alloy
Ibrahim Deiab et al.
VARIETY MANAGEMENT IN MANUFACTURING: PROCEEDINGS OF THE 47TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS (2014)
Evaluation of the performance of coated carbide tools in face milling TC6 alloy under dry condition
Qiulin Niu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Failure mechanisms of a PCD tool in high-speed face milling of Ti-6Al-4V alloy
Anhai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
State-of-the-art cryogenic machining and processing
A. Shokrani et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2013)
Tool life and wear mechanisms in high speed machining of Ti-6Al-4V alloy with PCD tools under various coolant pressures
Rosemar B. da Silva et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions
Zhiqiang Liu et al.
WEAR (2013)
High performance cutting of gamma titanium aluminides: Influence of lubricoolant strategy on tool wear and surface integrity
Fritz Klocke et al.
WEAR (2013)
Effect of fluid concentration in titanium machining with an atomization-based cutting fluid (ACF) spray system
Chandra Nath et al.
JOURNAL OF MANUFACTURING PROCESSES (2013)
A coupling method of response surfaces (CRSM) for cutting parameters optimization in machining titanium alloy under minimum quantity lubrication (MQL) condition
ZhiQiang Liu et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V
Anhai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Milling of gamma titanium-aluminum alloys
A. Beranoagirre et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting
M. J. Bermingham et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Ultrasonic-Assisted Grinding of Ti6Al4V Alloy
Mohsen Ghahramani Nik et al.
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)
A new optimization approach based on Kriging interpolation and sequential quadratic programming algorithm for end milling refractory titanium alloys
N. Lebaal et al.
APPLIED SOFT COMPUTING (2011)
Cryogenic turning of the Ti-6Al-4V alloy with modified cutting tool inserts
M. Dhananchezian et al.
CRYOGENICS (2011)
Machining induced surface integrity in titanium and nickel alloys: A review
Durul Ulutan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V
M. J. Bermingham et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Experimental study on turning of TC9 titanium alloy with cold water mist jet cooling
Q. L. An et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Machining of β-titanium-alloy Ti-10V-2Fe-3Al under cryogenic conditions: Cooling with carbon dioxide snow
Christian Machai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
CU nanoparticles effect on the tribological properties of hydrosilicate powders as lubricant additive for steel-steel contacts
Zhang Bao-Sen et al.
TRIBOLOGY INTERNATIONAL (2011)
Experimental Research of GrindingTC4 Titanium Alloy Using Green Silicon Carbide Wheel
X. H. Zheng et al.
ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XVI (2011)
Machining of Titanium Alloys with and without Coolant
S. Palanisamy et al.
LIGHT METALS TECHNOLOGY V (2011)
Study on orthogonal turning of titanium alloys with different coolant supply strategies
Z. G. Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Cooling techniques for improved productivity in turning
Vishal S. Sharma et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
An investigation of graphite nanoplatelets as lubricant in grinding
Matthew Alberts et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Surface integrity of dry machined titanium alloys
A. Ginting et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Characteristics of cutting forces and chip formation in machining of titanium alloys
S. Sun et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Burr Produced on the Drilling Process as a Function of Tool Wear and Lubricant-Coolant Conditions
Eder Silva Costa et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2009)
Current Approaches in Design and Supply of Metalworking Fluids
E. Brinksmeier et al.
TRIBOLOGY TRANSACTIONS (2009)
Finite element simulation of conventional and high speed machining of Ti6Al4V alloy
Domenico Umbrello
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Heat transfer and flow behaviour of aqueous suspensions of TiO2 nanoparticles (nanofluids) flowing upward through a vertical pipe
Yurong He et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Surface integrity of finished turned Ti-6Al-4V alloy with PCD tools using conventional and high pressure coolant supplies
Emmanuel O. Ezugwu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Optimal cutting conditions when dry end milling the aeroengine material Ti-6242S
A. Ginting et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Experimental and numerical studies on the performance of alloyed carbide tool in dry milling of aerospace material
A. Ginting et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
The effect of machining on surface integrity of titanium alloy Ti-6% Al-4% V
CH Che-Haron et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Evaluation of the performance of CBN tools when turning Ti-6Al-4V alloy with high pressure coolant supplies
EO Ezugwu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
XY Liu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications
I Gurrappa
MATERIALS CHARACTERIZATION (2003)
Titanium alloys for aerospace applications
M Peters et al.
ADVANCED ENGINEERING MATERIALS (2003)
An overview of the machinability of aeroengine alloys
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Tool life and surface integrity in turning titanium alloy
CH Che-Haron
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V
SY Hong et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Thermo-mechanical processing of high strength β-titanium alloys and effects on microstructure and properties
C Sauer et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Advanced cutting conditions for the milling of aeronautical alloys
LN López de lacalle et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Share Paper
