Related references
Note: Only part of the references are listed.Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys
Zan Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Cooperative deformation in high-entropy alloys at ultralow temperatures
Muhammad Naeem et al.
SCIENCE ADVANCES (2020)
Quantifying dislocation density in Al-Cu coatings produced by cold spray deposition
Tian Liu et al.
ACTA MATERIALIA (2020)
Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy
Qingge Xie et al.
ACTA MATERIALIA (2020)
Neutron diffraction monitoring of ductile cast iron under cyclic tension-compression
Stefanus Harjo et al.
ACTA MATERIALIA (2020)
High cycle fatigue performance of AlSi10mg alloy produced by selective laser melting
Z. W. Xu et al.
MECHANICS OF MATERIALS (2020)
Machine-learning assisted laser powder bed fusion process optimization for AlSi10Mg: New microstructure description indices and fracture mechanisms
Qian Liu et al.
ACTA MATERIALIA (2020)
Elasto-plastic deformation in Al-Cu cast alloys for engine components
M. Schoebel et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Global optimum of microstructure parameters in the CMWP line-profile-analysis method by combining Marquardt-Levenberg and Monte-Carlo procedures
Gabor Ribarik et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting
J. Delahaye et al.
ACTA MATERIALIA (2019)
Neutron Diffraction Study of Phase Stresses in Al/SiCp Composite During Tensile Test
Elzbieta Gadalinska et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Evolution of dislocation density in bainitic steel: Modeling and experiments
S. H. He et al.
ACTA MATERIALIA (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Modification of Eutectic Si in Al-Si-(Ba) Alloy by Inducing a Novel 9R Structure in Twins
Xuechao Sha et al.
MATERIALS (2018)
Composite Behavior of Lath Martensite Steels Induced by Plastic Strain, a New Paradigm for the Elastic-Plastic Response of Martensitic Steels
Tamas Ungar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
Ming Tang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM
Dong-Kyu Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Naoki Takata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Work Hardening, Dislocation Structure, and Load Partitioning in Lath Martensite Determined by In Situ Neutron Diffraction Line Profile Analysis
Stefanus Harjo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Martensite phase stress and the strengthening mechanism in TRIP steel by neutron diffraction
Stefanus Harjo et al.
SCIENTIFIC REPORTS (2017)
On the correlation among dislocation density, lath thickness and yield stress of bainite
S. H. He et al.
ACTA MATERIALIA (2017)
Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction
Biao Cai et al.
ACTA MATERIALIA (2017)
Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel
Sumit Bahl et al.
ACTA MATERIALIA (2017)
Microstructure and strength of selectively laser melted AlSi10Mg
J. Wu et al.
ACTA MATERIALIA (2016)
Evolution of dislocations and twins in a strong and ductile nanotwinned steel
P. Zhou et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Strain rate sensitivity and evolution of dislocations and twins in a twinning-induced plasticity steel
Z. Y. Liang et al.
ACTA MATERIALIA (2015)
Dislocation density evolution of AA 7020-T6 investigated by in-situ synchrotron diffraction under tensile load
Z. Y. Zhong et al.
MATERIALS CHARACTERIZATION (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Microstresses and crack formation in AlSi7MgCu and AlSi17Cu4 alloys for engine components
M. Schoebel et al.
ACTA MATERIALIA (2014)
Automotive copper and magnesium containing cast aluminium alloys: Report on the correlation between Yttrium modified microstructure and mechanical properties
Mohsen Ostad Shabani et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2014)
The influence of precipitation on plastic deformation of Al-Cu-Li alloys
A. Deschamps et al.
ACTA MATERIALIA (2013)
A systematic investigation of fracture mechanisms in Al-Si based eutectic alloy-Effect of Si modification
Sudha Joseph et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium
Frederic Mompiou et al.
ACTA MATERIALIA (2012)
Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles
D. H. Bacon et al.
ACTA MATERIALIA (2011)
Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure
S. Roy et al.
ACTA MATERIALIA (2011)
Current Status of Engineering Materials Diffractometer at J-PARC
Harjo Stefanus et al.
RESIDUAL STRESSES VIII (2011)
The effect of shear-resistant, plate-shaped precipitates on the work hardening of Al alloys: Towards a prediction of the strength-elongation correlation
J. da Costa Teixeira et al.
ACTA MATERIALIA (2009)
Rietveld analysis software for J-PARC
R. Oishi et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT (2009)
The role of internal stresses on the plastic deformation of the Al-Mg-Si-Cu alloy AA6111
H. Proudhon et al.
PHILOSOPHICAL MAGAZINE (2008)
Residual stress and its role in failure
P. J. Withers
REPORTS ON PROGRESS IN PHYSICS (2007)
Characterization of nanocrystalline materials by X-ray line profile analysis
Tamas Ungar
JOURNAL OF MATERIALS SCIENCE (2007)
Correlation between subgrains and coherently scattering domains
T Ungár et al.
POWDER DIFFRACTION (2005)
The microstructure of mechanically alloyed Al-Mg determined by X-ray diffraction peak profile analysis
J Gubicza et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
In situ neutron diffraction study of α-γ Fe-Cr-Ni alloys under tensile deformation
S Harjo et al.
ACTA MATERIALIA (2001)
Crystallite size distribution and dislocation structure determined by diffraction profile analysis:: principles and practical application to cubic and hexagonal crystals
T Ungár et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2001)
Share Paper
