Related references
Note: Only part of the references are listed.Effect of bimodal microstructure on the tensile properties of selective laser melt Al-Mg-Sc-Zr alloy
Rulong Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
3D pore structure characterization and hardness in a powder bed fusion-processed fully amorphous Zr-based bulk metallic glass
Jianye Shi et al.
MATERIALS CHARACTERIZATION (2020)
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
Jinliang Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting
Ruidi Li et al.
MATERIALS & DESIGN (2019)
Selective laser melting of a high strength Al-Mn-Sc alloy: Alloy design and strengthening mechanisms
Qingbo Jia et al.
ACTA MATERIALIA (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Towards a high strength aluminium alloy development methodology for selective laser melting
Qingbo Jia et al.
MATERIALS & DESIGN (2019)
Effect of platform temperature on the porosity, microstructure and mechanical properties of an Al-Mg-Sc-Zr alloy fabricated by selective laser melting
Yunjia Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting
Kun V. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting
Pei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
Kun V. Yang et al.
SCRIPTA MATERIALIA (2018)
Investigation on Selective Laser Melting AlSi10Mg Cellular Lattice Strut: Molten Pool Morphology, Surface Roughness and Dimensional Accuracy
Xuesong Han et al.
MATERIALS (2018)
Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys
A. B. Spierings et al.
MATERIALS & DESIGN (2018)
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Formation of a quasicrystalline phase in Al-Mn base alloys cast at intermediate cooling rates
Katarzyna Stan-Glowinska et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Characterisation of a novel Sc and Zr modified Al-Mg alloy fabricated by selective laser melting
Yunjia Shi et al.
MATERIALS LETTERS (2017)
SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment
A. B. Spierings et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Alloying Aluminum Alloys with Scandium
V. V. Zakharov et al.
METAL SCIENCE AND HEAT TREATMENT (2017)
Selective laser melting of aluminum alloys
Nesma T. Aboulkhair et al.
MRS BULLETIN (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties
Ruidi Li et al.
POWDER TECHNOLOGY (2017)
Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
Hu Zhang et al.
SCRIPTA MATERIALIA (2017)
Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
A. B. Spierings et al.
MATERIALS & DESIGN (2017)
Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode
Ting Qi et al.
MATERIALS & DESIGN (2017)
Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting
Adriaan B. Spierings et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Microstructural evolution and microhardness of a selective-laser-melted Ti-6Al-4V alloy after post heat treatments
S. Q. Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Changing the alloy composition of A17075 for better processability by selective laser melting
Maria L. Montero Sistiaga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
On the formation of A1Si10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties
Nesma T. Aboulkhair et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Correlative characterization of primary particles formed in as-cast Al-Mg alloy containing a high level of Sc
Shi'ang Zhou et al.
MATERIALS CHARACTERIZATION (2016)
Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography
I. Maskery et al.
MATERIALS CHARACTERIZATION (2016)
Strengthening mechanisms in an Al-Fe-Cr-Ti nano-quasicrystalline alloy and composites
S. Pedrazzini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of high strength Al-Cu-Mg alloys: Processing, microstructure and mechanical properties
Hu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
U. Tradowsky et al.
MATERIALS & DESIGN (2016)
The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting
Heng Rao et al.
MATERIALS & DESIGN (2016)
The Al-rich region of the Al-Fe-Mn alloy system
S. Balanetskyy et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
Noriko Read et al.
MATERIALS & DESIGN (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers
Milton Sergio Fernandes de Lima et al.
MATERIALS & DESIGN (2014)
Fabrication and Characterization of High Strength Al-Cu alloys Processed Using Laser Beam Melting in Metal Powder Bed
Bhrigu Ahuja et al.
8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014) (2014)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications
Atsushi Takaichi et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
The effect of Sc additions on the microstructure and age hardening behaviour of as cast Al-Sc alloys
S. Costa et al.
MATERIALS & DESIGN (2012)
NIH Image to ImageJ: 25 years of image analysis
Caroline A. Schneider et al.
NATURE METHODS (2012)
Thermal Conductivity of Metal Powder and Consolidated Material fabricated via Selective Laser Melting
Mohd Rizal Alkahari et al.
EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV (2012)
Comparison of density measurement techniques for additive manufactured metallic parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2011)
Stable decagonal quasicrystals in the Al-Fe-Cr and Al-Fe-Mn alloy systems
D. Pavlyuchkov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Strengthening mechanisms in solid solution aluminum alloys
Oyvind Ryen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Effect of manganese on grain refinement of Mg-Al based alloys
P Cao et al.
SCRIPTA MATERIALIA (2006)
Loss in coherency and coarsening behavior of Al3Sc precipitates
S Iwamura et al.
ACTA MATERIALIA (2004)
Production and mechanical properties of aluminum alloys with dispersed nanoscale quasicrystalline and amorphous particles
A Inoue et al.
METALS AND MATERIALS INTERNATIONAL (2003)
The effect of cooling rate on the morphology of primary Al3Se intermetallic particles in Al-Sc alloys
KB Hyde et al.
ACTA MATERIALIA (2001)
Scientific principles of making an alloying addition of scandium to aluminium alloys
VG Davydov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)