4.6 Article

The Use of MgO Obtained from Serpentinite in the Synthesis of a Magnesium Potassium Phosphate Matrix for Radioactive Waste Immobilization

Journal

APPLIED SCIENCES-BASEL
Volume 11, Issue 1, Pages -

Publisher

MDPI
DOI: 10.3390/app11010220

Keywords

serpentinite; magnesium oxide; calcination; particle size distribution; specific surface area; magnesium potassium phosphate matrix; radioactive waste; immobilization; hydrolytic stability; strength

Ask authors/readers for more resources

The study focuses on the synthesis of a magnesium potassium phosphate matrix for the immobilization of radioactive waste using magnesium oxide as a necessary binding agent. The research found a cost-effective approach to prepare the matrix and confirmed its necessary quality indicators for radioactive waste immobilization. Additionally, the high hydrolytic stability of the matrix was demonstrated through leaching rate analysis.
Featured Application: MgO is used for the synthesis of a magnesium potassium phosphate matrix as a material for immobilization of radioactive waste in order to ensure radiation safety during storage or disposal of waste. Magnesium oxide is a necessary binding agent for the synthesis of a magnesium potassium phosphate (MPP) matrix based on MgKPO4 x 6H(2)O, which is promising for the solidification of radioactive waste (RW) on an industrial scale. The performed research is devoted to finding a cost-effective approach to the synthesis of MPP matrix by using MgO with an optimal ratio of the quality of the binding agent and the cost of its production. A method for obtaining MgO from the widely available natural mineral serpentinite was proposed. The phase composition, particle morphology, and granulometric composition of MgO were studied. It was found that the obtained MgO sample, in addition to the target periclase phase, also contains impurities of brucite and hydromagnesite; however, after calcining at 1300 degrees C for 3 h, MgO transforms into a monophase state with a periclase structure with an average crystallite size of 62 nm. The aggregate size of the calcined MgO powder in an aqueous medium was about 55 mu m (about 30 mu m after ultrasonic dispersion), and the specific surface area was 5.4 m(2)/g. This powder was used to prepare samples of the MPP matrix, the compressive strength of which was about 6 MPa. The high hydrolytic stability of the MPP matrix was shown: the differential leaching rate of magnesium, potassium, and phosphorus from the sample on the 91st day of its contact with water does not exceed 1.6 x 10(-5), 4.7 x 10(-4) i 8.9 x 10(-5) g/(cm(2)center dot day), respectively. Thus, it was confirmed that the obtained MPP matrix possesses the necessary quality indicators for RW immobilization.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available