Related references
Note: Only part of the references are listed.From Lithographically Patternable to Genetically Patternable Electronic Materials for Miniaturized, Scalable, and Soft Implantable Bioelectronics to Interface with Nervous and Cardiac Systems
Ren Liu et al.
ACS APPLIED ELECTRONIC MATERIALS (2021)
Factors affecting thermal conductivities of the polymers and polymer composites: A review
Yongqiang Guo et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Synergetic enhancement of thermal conductivity by constructing BN and AlN hybrid network in epoxy matrix
Di Liang et al.
JOURNAL OF POLYMER RESEARCH (2020)
Near-Linear Responsive and Wide-Range Pressure and Stretch Sensor Based on Hierarchical Graphene-Based Structures via Solvent-Free Preparation
Jian Wang et al.
POLYMERS (2020)
Achieving a 3D Thermally Conductive while Electrically Insulating Network in Polybenzoxazine with a Novel Hybrid Filler Composed of Boron Nitride and Carbon Nanotubes
Yi Wang et al.
POLYMERS (2020)
Effect of Alumina Nanowires on the Thermal Conductivity and Electrical Performance of Epoxy Composites
Liangsong Huang et al.
POLYMERS (2020)
Ballistic Performance of Ramie Fabric Reinforcing Graphene Oxide-Incorporated Epoxy Matrix Composite
Artur Camposo Pereira et al.
POLYMERS (2020)
Thermal Properties of Binary Filler Hybrid Composite with Graphene Oxide and Pyrolyzed Silicon-Coated Boron Nitride
Jaehyun Wie et al.
POLYMERS (2020)
Multifunctional Biocomposites Based on Polyhydroxyalkanoate and Graphene/Carbon Nanofiber Hybrids for Electrical and Thermal Applications
Pietro Cataldi et al.
ACS APPLIED POLYMER MATERIALS (2020)
Jelly-Inspired Construction of the Three-Dimensional Interconnected BN Network for Lightweight, Thermally Conductive, and Electrically Insulating Rubber Composites
Jingchao Li et al.
ACS APPLIED ELECTRONIC MATERIALS (2020)
Synergetic effect of hybrid fillers of boron nitride, graphene nanoplatelets, and short carbon fibers for enhanced thermal conductivity and electrical resistivity of epoxy nanocomposites
Mohammad Owais et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Silver nanoparticle-modified alumina microsphere hybrid composites for enhanced energy density and thermal conductivity
Linlin Ren et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Thermal properties of doubly reinforced fiberglass/epoxy composites with graphene nanoplatelets, graphene oxide and reduced-graphene oxide
M. Rafiee et al.
COMPOSITES PART B-ENGINEERING (2019)
Study on Delamination Between Polymer Materials and Metals in IC Packaging Process
Cheng-Tang Pan et al.
POLYMERS (2019)
Nacre-inspired polymer composites with high thermal conductivity and enhanced mechanical strength
Tao Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Achieving High Thermal Conductivity in Epoxy Composites: Effect of Boron Nitride Particle Size and Matrix-Filler Interface
Sasan Moradi et al.
POLYMERS (2019)
Spray-assisted assembled spherical boron nitride as fillers for polymers with enhanced thermally conductivity
Linlin Ren et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Spherical core-shell Al@Al2O3 filled epoxy resin composites as high-performance thermal interface materials
Dasha Mao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Optimization of Boron Nitride Sphere Loading in Epoxy: Enhanced Thermal Conductivity and Excellent Electrical Insulation
Hua Zhang et al.
POLYMERS (2019)
Modulating the thermal conductivity in hexagonal boron nitride via controlled boron isotope concentration
Chao Yuan et al.
COMMUNICATIONS PHYSICS (2019)
Hybrid fillers of hexagonal and cubic boron nitride in epoxy composites for thermal management applications
Yuyuan Zhang et al.
RSC ADVANCES (2019)
Role of Substrate Surface Morphology on the Performance of Graphene Inks for Flexible Electronics
Jasper Ruhkopf et al.
ACS APPLIED ELECTRONIC MATERIALS (2019)
Thermal Conductivity of Polymers and Their Nanocomposites
Xiangfan Xu et al.
ADVANCED MATERIALS (2018)
Enhanced thermal conductivity for Ag-deposited alumina sphere/epoxy resin composites through manipulating interfacial thermal resistance
Linlin Ren et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Enhanced through-plane thermal conductivity of PTFE composites with hybrid fillers of hexagonal boron nitride platelets and aluminum nitride particles
Chen Pan et al.
COMPOSITES PART B-ENGINEERING (2018)
Thermal Conductivity of Aluminosilicate- and Aluminum Oxide-Filled Thermosets for Injection Molding: Effect of Filler Content, Filler Size and Filler Geometry
Yang Zhao et al.
POLYMERS (2018)
Synergetic enhancement of mechaniCal and electrical strength in epoxy/silica nanocomposites via chemically-bonded interface
He Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
The synergistic effects of the micro-BN and nano-Al2O3 in micro-nano composites on enhancing the thermal conductivity for insulating epoxy resin
Wancong Bian et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Tailored surface chemistry of SiO2 particles with improved rheological, thermal-mechanical and adhesive properties of epoxy based composites for underfill applications
Gang Li et al.
POLYMER (2018)
Poly(dopamine) assisted epoxy functionalization of hexagonal boron nitride for enhancement of epoxy resin anticorrosion performance
Chunli Zhang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Alumina-graphene hybrid filled epoxy composite: Quantitative validation and enhanced thermal conductivity
M. Wasim Akhtar et al.
COMPOSITES PART B-ENGINEERING (2017)
Preparation of functionalized kaolinite/epoxy resin nanocomposites with enhanced thermal properties
Linna Su et al.
APPLIED CLAY SCIENCE (2017)
Thermal conductivity and thermo-physical properties of nanodiamond-attached exfoliated hexagonal boron nitride/epoxy nanocomposites for microelectronics
Yinhang Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Understanding the strain-dependent dielectric behavior of carbon black reinforced natural rubber - An interfacial or bulk phenomenon?
Yanhui Huang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Preparation and properties of thermally conductive polyimide/boron nitride composites
Na Yang et al.
RSC ADVANCES (2016)
Facile and Environmentally Friendly Solution-Processed Aluminum Oxide Dielectric for Low-Temperature, High-Performance Oxide Thin-Film Transistors
Wangying Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Spherical and flake-like BN filled epoxy composites: morphological effect on the thermal conductivity, thermo-mechanical and dielectric properties
Liang Huang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2015)
Fabrication and origin of new flame retarding bismaleimide resin system with low dielectric constant and loss based on microencapsulated hexaphenoxycyclotriphosphazene in low phosphorus content
Tingting Cao et al.
POLYMER DEGRADATION AND STABILITY (2015)
Survey of High-Temperature Polymeric Encapsulants for Power Electronics Packaging
Yiying Yao et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2015)
Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide
Yan-Jun Wan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Engineering the coefficient of thermal expansion and thermal conductivity of polymers filled with high aspect ratio silica nanofibers
Liyun Ren et al.
COMPOSITES PART B-ENGINEERING (2014)
Exfoliated hexagonal boron nitride-based polymer nanocomposite with enhanced thermal conductivity for electronic encapsulation
Ziyin Lin et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
High-performance epoxy/silica coated silver nanowire composites as underfill material for electronic packaging
Chao Chen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Nano-micro structure of functionalized boron nitride and aluminum oxide for epoxy composites with enhanced thermal conductivity and breakdown strength
Lijun Fang et al.
RSC ADVANCES (2014)
High-Performance Light-Emitting Diodes Encapsulated with Silica-Filled Epoxy Materials
Tian Li et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Magnetic Alignment of Hexagonal Boron Nitride Platelets in Polymer Matrix: Toward High Performance Anisotropic Polymer Composites for Electronic Encapsulation
Ziyin Lin et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Enhanced Thermal Conductivity of EpoxyGraphene Composites by Using Non-Oxidized Graphene Flakes with Non-Covalent Functionalization
Sung Ho Song et al.
ADVANCED MATERIALS (2013)
Green synthesis of silver nanoparticles from leaf extract of Mimusops elengi, Linn. for enhanced antibacterial activity against multi drug resistant clinical isolates
P. Prakash et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2013)
Thermal conductivity of epoxy composites with a binary-particle system of aluminum oxide and aluminum nitride fillers
Seran Choi et al.
COMPOSITES PART B-ENGINEERING (2013)
Preparation and characterization of long-chain alkyl silane-functionalized graphene film
Wen-Shi Ma et al.
JOURNAL OF MATERIALS SCIENCE (2013)
The FTIR studies of gels and thin films of Al2O3-TiO2 and Al2O3-TiO2-SiO2 systems
Anna Adamczyk et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2012)
High thermal conductivity epoxy composites with bimodal distribution of aluminum nitride and boron nitride fillers
Jung-Pyo Hong et al.
THERMOCHIMICA ACTA (2012)
Improving thermal conductivity while retaining high electrical resistivity of epoxy composites by incorporating silica-coated multi-walled carbon nanotubes
Wei Cui et al.
CARBON (2011)
Melt-spinning and thermal stability behavior of TiO2 nanoparticle/polypropylene nanocomposite fibers
Chih-Wei Chiu et al.
JOURNAL OF POLYMER RESEARCH (2011)
Study on the Properties of the Epoxy-Matrix Composites Filled with Thermally Conductive AlN and BN Ceramic Particles
B. L. Zhu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Comparative study of thermally conductive fillers in underfill for the electronic components
WS Lee et al.
DIAMOND AND RELATED MATERIALS (2005)
Effective elastic modulus of underfill material for flip-chip applications
JM Qu et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2002)