Related references
Note: Only part of the references are listed.Clinical outcomes at 2 years of the Absorb bioresorbable vascular scaffold versus the Xience drug-eluting metallic stent in patients presenting with acute coronary syndrome versus stable coronary disease-AIDA trial substudy
Ruben Y. G. Tijssen et al.
CATHETERIZATION AND CARDIOVASCULAR INTERVENTIONS (2020)
Fabricating mechanically improved silk-based vascular grafts by solution control of the gel-spinning process
Maria Rodriguez et al.
BIOMATERIALS (2020)
Design of biodegradable, implantable devices towards clinical translation
Chunmei Li et al.
NATURE REVIEWS MATERIALS (2020)
Shape memory epoxy composites with high mechanical performance manufactured by multi-material direct ink writing
Yufeng Guo et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
3D Bioprinting the Cardiac Purkinje System Using Human Adipogenic Mesenchymal Stem Cell Derived Purkinje Cells
Evan P. Tracy et al.
CARDIOVASCULAR ENGINEERING AND TECHNOLOGY (2020)
Re-entrant solid behavior of 3D-printable epoxy inks
Rishabh P. Ekbote et al.
RHEOLOGICA ACTA (2020)
Flexible and Stretchable Temperature Sensors Fabricated Using Solution-Processable Conductive Polymer Composites
Li Dan et al.
ADVANCED HEALTHCARE MATERIALS (2020)
Silk fibroin vascular graft: a promising tissue-engineered scaffold material for abdominal venous system replacement
Sho Kiritani et al.
SCIENTIFIC REPORTS (2020)
Bioprinting small diameter blood vessel constructs with an endothelial and smooth muscle cell bilayer in a single step
Lei Xu et al.
BIOFABRICATION (2020)
Direct writing alginate bioink inside pre-polymers of hydrogels to create patterned vascular networks
Yongkang Wang et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Collagen-based bioinks for hard tissue engineering applications: a comprehensive review
C. F. Marques et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)
Low-cost sensor-integrated 3D-printed personalized prosthetic hands for children with amniotic band syndrome: A case study in sensing pressure distribution on an anatomical human-machine interface (AHMI) using 3D-printed conformal electrode arrays
Yuxin Tong et al.
PLOS ONE (2019)
Experimental study of polymeric stent fabrication using homemade 3D printing system
Danyang Zhao et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Advanced Polymer Designs for Direct-Ink-Write 3D Printing
Longyu Li et al.
CHEMISTRY-A EUROPEAN JOURNAL (2019)
A bioink blend for rotary 3D bioprinting tissue engineered small-diameter vascular constructs
Sebastian Freeman et al.
ACTA BIOMATERIALIA (2019)
The Future of Cardiovascular Stents: Bioresorbable and Integrated Biosensor Technology
Daniel Hoare et al.
ADVANCED SCIENCE (2019)
A versatile PDMS submicrobead/graphene oxide nanocomposite ink for the direct ink writing of wearable micron-scale tactile sensors
Ge Shi et al.
APPLIED MATERIALS TODAY (2019)
Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots
Yin Cheng et al.
ACS NANO (2019)
3D printing of conjugated polymers
Robert S. Jordan et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2019)
Multinozzle Multichannel Temperature Deposition System for Construction of a Blood Vessel
Huanbao Liu et al.
SLAS TECHNOLOGY (2018)
Construction of a bilayered vascular graft with smooth internal surface for improved hemocompatibility and endothelial cell monolayer formation
Xianhao Dong et al.
BIOMATERIALS (2018)
Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures
Giorgia Franchin et al.
MATERIALS (2018)
Micro additive manufacturing of glucose biosensors: A feasibility study
Sepehr Nesaei et al.
ANALYTICA CHIMICA ACTA (2018)
3D printing of SiC ceramic: Direct ink writing with a solution of preceramic polymers
Hehao Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
3D-Printed PCL/PLA Composite Stents: Towards a New Solution to Cardiovascular Problems
Antonio J. Guerra et al.
MATERIALS (2018)
3D-Printed Sugar-Based Stents Facilitating Vascular Anastomosis
Ali Farzin et al.
ADVANCED HEALTHCARE MATERIALS (2018)
High-speed on-demand 3D printed bioresorbable vascular scaffolds
Henry Oliver T. Ware et al.
MATERIALS TODAY CHEMISTRY (2018)
Additive Manufacturing With Conductive, Viscoelastic Polymer Composites: Direct-Ink-Writing of Electrolytic and Anodic Poly(Ethylene Oxide) Composites
Sepehr Nesaei et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Direct ink writing of ceramic matrix composite structures
Giorgia Franchin et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
3D Printing of Artificial Blood Vessel: Study on Multi-Parameter Optimization Design for Vascular Molding Effect in Alginate and Gelatin
Huanbao Liu et al.
MICROMACHINES (2017)
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Qing Gao et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Qing Gao et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
A novel 3D additive manufacturing machine to biodegradable stents
A. Guerra et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017) (2017)
Development of a clay based bioink for 3D cell printing for skeletal application
T. Ahlfeld et al.
BIOFABRICATION (2017)
Fully Packaged Carbon Nanotube Supercapacitors by Direct Ink Writing on Flexible Substrates
Bolin Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Self-Healing Hydrogels
Danielle Lynne Taylor et al.
ADVANCED MATERIALS (2016)
Rheological properties of cellulose nanocrystal-embedded polymer composites: a review
Yern Chee Ching et al.
CELLULOSE (2016)
Additive Manufacturing of Dense Ceramic Parts via Direct Ink Writing of Aqueous Alumina Suspensions
Lisa Rueschhoff et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2016)
Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds
Andrea Zocca et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Direct Ink Writing of micrometric SiOC ceramic structures using a preceramic polymer
Giovanni Pierin et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Research on the printability of hydrogels in 3D bioprinting
Yong He et al.
SCIENTIFIC REPORTS (2016)
Shrinking the Supply Chain for Implantable Coronary Stent Devices
Sean S. Moore et al.
ANNALS OF BIOMEDICAL ENGINEERING (2016)
Stent thrombosis and restenosis: what have we learned and where are we going? The Andreas Gruntzig Lecture ESC 2014
Robert A. Byrne et al.
EUROPEAN HEART JOURNAL (2015)
In vivo evaluation and characterization of a bio-absorbable drug-coated stent fabricated using a 3D-printing system
Su A. Park et al.
MATERIALS LETTERS (2015)
Small diameter electrospun silk fibroin vascular grafts: Mechanical properties, in vitro biodegradability, and in vivo biocompatibility
Valentina Catto et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Fibrinogen as a promising material for various biomedical applications
Jae Yeon Joo et al.
MOLECULAR & CELLULAR TOXICOLOGY (2015)
Rapid prototyped sutureless anastomosis device from self-curing silk bio-ink
Rod R. Jose et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2015)
Fabrication of highly interconnected porous silk fibroin scaffolds for potential use as vascular grafts
Meifeng Zhu et al.
ACTA BIOMATERIALIA (2014)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Small-diameter vascular tissue engineering
Dawit G. Seifu et al.
NATURE REVIEWS CARDIOLOGY (2013)
Preparation of double-raschel knitted silk vascular grafts and evaluation of short-term function in a rat abdominal aorta
Takahito Yagi et al.
JOURNAL OF ARTIFICIAL ORGANS (2011)
Materials fabrication from Bombyx mori silk fibroin
Danielle N. Rockwood et al.
NATURE PROTOCOLS (2011)
Effect of calcium alginate concentration on viability and proliferation of encapsulated fibroblasts
Siti P. M. Bohari et al.
BIO-MEDICAL MATERIALS AND ENGINEERING (2011)
Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates
Aleksander Skardal et al.
BIOMATERIALS (2010)
Tubular silk scaffolds for small diameter vascular grafts
Michael Lovett et al.
ORGANOGENESIS (2010)
Rheological Properties of Native Silk Fibroins from Domestic and Wild Silkworms, and Flow Analysis in Each Spinneret by a Finite Element Method
Motoaki Moriya et al.
BIOMACROMOLECULES (2009)
Scaffold-free vascular tissue engineering using bioprinting
Cyrille Norotte et al.
BIOMATERIALS (2009)
Rheological Behavior of Alginate Solutions for Biomanufacturing
Rodrigo Alvarenga Rezende et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Direct-write assembly of microperiodic silk fibroin scaffolds for tissue engineering applications
Sourabh Ghosh et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Micro-extrusion of organic inks for direct-write assembly
Julien Bruneaux et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing
Robert Chang et al.
TISSUE ENGINEERING PART A (2008)
Hydrogels as extracellular matrices for skeletal tissue engineering: state-of-the-art and novel application in organ printing
Natalja E. Fedorovich et al.
TISSUE ENGINEERING (2007)
Prosthetic vascular grafts: Wrong models, wrong questions and no healing
Peter Zilla et al.
BIOMATERIALS (2007)
The road to bioabsorbable stents: Reaching clinical reality?
P Erne et al.
CARDIOVASCULAR AND INTERVENTIONAL RADIOLOGY (2006)
Small-diameter artificial arteries engineered in vitro
BC Isenberg et al.
CIRCULATION RESEARCH (2006)
Endothelialization of a non-woven silk fibroin net for use in tissue engineering: growth and gene regulation of hunian endothelial cells
RE Unger et al.
BIOMATERIALS (2004)
Mechanical behavior in living cells consistent with the tensegrity model
N Wang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2001)