Related references
Note: Only part of the references are listed.Three-dimensional-printed Fabry-Perot interferometer on an optical fiber tip for a gas pressure sensor
Heming Wei et al.
APPLIED OPTICS (2020)
DLW-printed optical fiber micro-connector kit for effective light coupling in optical prototyping
A. Pisarenko et al.
OPTIK (2020)
Three-dimensional polymer wire bonds on a chip: morphology and functionality
R. D. Zvagelsky et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)
Plate-nanolattices at the theoretical limit of stiffness and strength
Cameron Crook et al.
NATURE COMMUNICATIONS (2020)
Enhanced adhesion in two-photon polymerization direct laser writing
A. G. Izard et al.
AIP ADVANCES (2020)
Shack-Hartmann wavefront sensors based on 2D refractive lens arrays and super-resolution multi-contrast X-ray imaging
Andrey Mikhaylov et al.
JOURNAL OF SYNCHROTRON RADIATION (2020)
Multimode Interference of Bloch Surface Electromagnetic Waves
Kirill R. Safronov et al.
ACS NANO (2020)
Hard X-ray wavefront correction via refractive phase plates made by additive and subtractive fabrication techniques
Frank Seiboth et al.
JOURNAL OF SYNCHROTRON RADIATION (2020)
Thermal post-curing as an efficient strategy to eliminate process parameter sensitivity in the mechanical properties of two-photon polymerized materials
Jens Bauer et al.
OPTICS EXPRESS (2020)
Femtosecond laser programmed artificial musculoskeletal systems
Zhuo-Chen Ma et al.
NATURE COMMUNICATIONS (2020)
Ptychographic characterization of polymer compound refractive lenses manufactured by additive technology
M. Lyubomirskiy et al.
OPTICS EXPRESS (2019)
10 years of pioneering X-ray science at the Free-Electron Laser FLASH at DESY
Joerg Rossbach et al.
PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2019)
Optical performance and radiation stability of polymer X-ray refractive nano-lenses
Alexander Barannikov et al.
JOURNAL OF SYNCHROTRON RADIATION (2019)
Pyrolysis-induced shrinking of three-dimensional structures fabricated by two-photon polymerization: experiment and theoretical model
Braulio Cardenas-Benitez et al.
MICROSYSTEMS & NANOENGINEERING (2019)
Structural color three-dimensional printing by shrinking photonic crystals
Yejing Liu et al.
NATURE COMMUNICATIONS (2019)
Optical properties of photoresists for femtosecond 3D printing: refractive index, extinction, luminescence-dose dependence, aging, heat treatment and comparison between 1-photon and 2-photon exposure
Michael Schmid et al.
OPTICAL MATERIALS EXPRESS (2019)
Studying Cell Mechanobiology in 3D: The Two-Photon Lithography Approach
Enrico Domenico Lemma et al.
TRENDS IN BIOTECHNOLOGY (2019)
Additive-manufacturing of 3D glass-ceramics down to nanoscale resolution
Darius Gailevicius et al.
NANOSCALE HORIZONS (2019)
Shrinkage of SU-8 microstructures during carbonization
Rucha Natu et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)
Beyond 100 nm resolution in 3D laser lithography - Post processing solutions
G. Seniutinas et al.
MICROELECTRONIC ENGINEERING (2018)
In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration
P. -I. Dietrich et al.
NATURE PHOTONICS (2018)
Scalable Nanostructured Carbon Electrode Arrays for Enhanced Dopamine Detection
Silvia Demuru et al.
ACS SENSORS (2018)
3D-Printed Carbon Electrodes for Neurotransmitter Detection
Cheng Yang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Nano-printed miniature compound refractive lens for desktop hard x-ray microscopy
Mona Mirzaeimoghri et al.
PLOS ONE (2018)
Polymer X-ray refractive nano-lenses fabricated by additive technology
A. K. Petrov et al.
OPTICS EXPRESS (2017)
Custom-Designed Glassy Carbon Tips for Atomic Force Microscopy
Anna Zakhurdaeva et al.
MICROMACHINES (2017)
Optically Clear and Resilient Free-Form μ-Optics 3D-Printed via Ultrafast Laser Lithography
Linas Jonusauskas et al.
MATERIALS (2017)
Harnessing Photochemical Shrinkage in Direct Laser Writing for Shape Morphing of Polymer Sheets
Anton A. Bauhofer et al.
ADVANCED MATERIALS (2017)
Approaching theoretical strength in glassy carbon nanolattices
J. Bauer et al.
NATURE MATERIALS (2016)
Two-photon direct laser writing of ultracompact multi-lens objectives (vol 7, 11763, 2016)
Timo Gissibl et al.
NATURE PHOTONICS (2016)
Two-photon direct laser writing of ultracompact multi-lens objectives
Timo Gissibl et al.
NATURE PHOTONICS (2016)
Light-Fueled Microscopic Walkers
Hao Zeng et al.
ADVANCED MATERIALS (2015)
Effect of the photoinitiator presence and exposure conditions on laser-induced damage threshold of ORMOSIL (SZ2080)
Albertas Zukauskas et al.
OPTICAL MATERIALS (2015)
A review on the processing accuracy of two-photon polymerization
Xiaoqin Zhou et al.
AIP ADVANCES (2015)
Characterization of photopolymers used in laser 3D micro/nanolithography by means of laser-induced damage threshold (LIDT)
Albertas Zukauskas et al.
OPTICAL MATERIALS EXPRESS (2014)
Formation of three-dimensional carbon microstructures via two-photon microfabrication and microtransfer molding
Yuya Daicho et al.
OPTICAL MATERIALS EXPRESS (2013)
Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography
Tiemo Bueckmann et al.
ADVANCED MATERIALS (2012)
Magnetoelastic metamaterials
Mikhail Lapine et al.
NATURE MATERIALS (2012)
3D microoptical elements formed in a photostructurable germanium silicate by direct laser writing
M. Malinauskas et al.
OPTICS AND LASERS IN ENGINEERING (2012)
Fluctuation limitations on the voxel minimal size at laser nanopolymerization
A. V. Pikulin et al.
TECHNICAL PHYSICS (2012)
Glassy Carbon as an Absolute Intensity Calibration Standard for Small-Angle Scattering
Fan Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Three-Dimensional Invisibility Cloak at Optical Wavelengths
Tolga Ergin et al.
SCIENCE (2010)
Thermal stability of polymer derived SiBNC ceramics
Yun Tang et al.
CERAMICS INTERNATIONAL (2009)
UV-curable ZnS/polymer nanocomposite for replication of micron and submicron features
Valtteri Kalima et al.
OPTICAL MATERIALS (2009)
Ultra-Low Shrinkage Hybrid Photosensitive Material for Two-Photon Polymerization Microfabrication
Aleksandr Ovsianikov et al.
ACS NANO (2008)
Engineering stop gaps of inorganic-organic polymeric 3D woodpile photonic crystals with post-thermal treatment
Jiafang Li et al.
OPTICS EXPRESS (2008)
Direct 3D patterning of TiO2 using femtosecond laser pulses
Sven Passinger et al.
ADVANCED MATERIALS (2007)
Superprism phenomena in waveguide-coupled woodpile structures fabricated by two-photon polymerization
J Serbin et al.
OPTICS EXPRESS (2006)
Femtosecond laser-induced two-photon polymerization of inorganic-organic hybrid materials for applications in photonics
J Serbin et al.
OPTICS LETTERS (2003)
Pyrolysis of negative photoresists to fabricate carbon structures for microelectromechanical systems and electrochemical applications
A Singh et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)