4.6 Article

Static Mechanical Properties of Expanded Polypropylene Crushable Foam

Journal

MATERIALS
Volume 14, Issue 2, Pages -

Publisher

MDPI
DOI: 10.3390/ma14020249

Keywords

compressive deformation; EPP foam; foam; microstructure; strain rate

Ask authors/readers for more resources

This study aimed to investigate the influence of loading strain rate, material density, and microstructure on the mechanical properties of closed-cell polymeric foams. It was found that increasing strain rate and foam density raised compressive strength and energy absorption capacity, while increasing temperature caused a decrease in these properties. Differences in foam microstructures also led to variations in strength and energy absorption capacity during testing at the same loading strain rate.
Closed-cell expanded polypropylene (EPP) foam is commonly used in car bumpers for the purpose of absorbing energy impacts. Characterization of the foam's mechanical properties at varying strain rates is essential for selecting the proper material used as a protective structure in dynamic loading application. The aim of the study was to investigate the influence of loading strain rate, material density, and microstructure on compressive strength and energy absorption capacity for closed-cell polymeric foams. We performed quasi-static compressive strength tests with strain rates in the range of 0.2 to 25 mm/s, using a hydraulically controlled material testing system (MTS) for different foam densities in the range 20 g/dm(3) to 220 g/dm(3). The above tests were carried out as numerical simulation using ABAQUS software. The verification of the properties was carried out on the basis of experimental tests and simulations performed using the finite element method. The method of modelling the structure of the tested sample has an impact on the stress values. Experimental tests were performed for various loads and at various initial temperatures of the tested sample. We found that increasing both the strain rate of loading and foam density raised the compressive strength and energy absorption capacity. Increasing the ambient and tested sample temperature caused a decrease in compressive strength and energy absorption capacity. For the same foam density, differences in foam microstructures were causing differences in strength and energy absorption capacity when testing at the same loading strain rate. To sum up, tuning the microstructure of foams could be used to acquire desired global materials properties. Precise material description extends the possibility of using EPP foams in various applications.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available