Low chlorine impurity might be beneficial in chlorine dioxide disinfection

Chlorine dioxide (ClO2) is a prevalently used disinfectant alternative to chlorine, due to its effectiveness in pathogen inactivation and low yields of organic halogenated disinfection byproducts (DBPs). However, during ClO2 generation, chlorine is inevitably introduced into the obtained ClO2 solution as an impurity, which could compromise the merits of ClO2 disinfection. In this study, drinking water disinfection with ClO2 containing 0-25% chlorine impurity (i.e., at Cl-2 to ClO2 mass ratios of 0-25%) was simulated, and the effect of chlorine impurity on the DBP formation and developmental toxicity of the finished water was evaluated. With increasing the chlorine impurity in ClO2, the chlorite level kept decreasing and the chlorate level gradually increased; meanwhile, an unexpected trend from decline to rise was observed for the total organic halogenated DBPs, with the minimum level appearing at 5% chlorine impurity. To unravel the mechanisms for the variations of organic halogenated DBPs with chlorine impurity, a quantitative kinetic model was developed to simulate the formation of chlorinated, brominated, and iodinated DBPs in the ClO2-disinfected drinking water. The modeling results indicated that reactions involving iodide accounted for the decrease of organic halogenated DBPs at a relatively low chlorine impurity level. In accordance with DBP formation, ClO2 with 5% chlorine impurity generated less toxic drinking water than pure ClO2, while significantly higher developmental toxicity was induced until the chlorine impurity reached 25%. For E. coli inactivation, the presence of chlorine impurity enhanced the disinfection efficiency due to a synergistic effect of ClO2 and chlorine. Therefore, disinfection practices with ClO2 containing low chlorine impurity (e.g., < 10%) might be favored (i.e., there is no need to eliminate low chlorine impurity in the ClO2 solution), while those containing high chlorine impurity should be concerned. (C) 2020 Elsevier Ltd. All rights reserved.

Automated summary

Chlorine impurity in chlorine dioxide solution impacts disinfection efficiency and DBPs formation. Studies showed that 5% chlorine impurity generated the lowest level of organic halogenated DBPs, while higher developmental toxicity was induced with higher chlorine impurity.