Related references
Note: Only part of the references are listed.The hydrogen gas bio-based economy and the production of renewable building block chemicals, food and energy
Jo De Vrieze et al.
NEW BIOTECHNOLOGY (2020)
Bayesian probabilistic prediction of precipitation behavior in Ni-Ti shape memory alloys
P. Honarmandi et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Modeling and control of a small hydro-power plant for a DC microgrid
Walter Gil-Gonzalez et al.
ELECTRIC POWER SYSTEMS RESEARCH (2020)
A review on performance of biogas and hydrogen on diesel engine in dual fuel mode
Chinmay Deheri et al.
FUEL (2020)
Renewable and energy storage resources for enhancing transient stability margins: A PDE-based nonlinear control strategy
Serhat Obuz et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2020)
Phase field simulation on the cyclic degeneration of one-way shape memory effect of NiTi shape memory alloy single crystal
Bo Xu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Characterization of the arcing phenomenon in micro-EDM and its effect on key mechanical properties of medical-grade Nitinol
James Wamai Mwangi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Thermodynamic analysis and optimization of solar thermal engine: Performance enhancement
I Tlili et al.
PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)
Maximizing energy production from hydropower dams using short-term weather forecasts
Shahryar Khalique Ahmad et al.
RENEWABLE ENERGY (2020)
Small scale solar tower coupled with micro gas turbine
A. Giostri et al.
RENEWABLE ENERGY (2020)
Standard thermodynamic properties for the energy grade evaluation of fossil fuels and renewable fuels
Weijia Huang et al.
RENEWABLE ENERGY (2020)
Hybrid thermal energy storage with phase change materials for solar domestic hot water applications: Direct versus indirect heat exchange systems
M. Y. Abdelsalam et al.
RENEWABLE ENERGY (2020)
Renewable and non-renewable energy consumption-economic growth nexus: New evidence from South Asia
Mohammad Mafizur Rahman et al.
RENEWABLE ENERGY (2020)
Combinatorial synthesis of Ni-Mn-Ga-(Fe,Co,Cu) high temperature ferromagnetic shape memory alloys thin films
Vasileios Alexandrakis et al.
SCRIPTA MATERIALIA (2020)
Synergistic effect of hydrogen peroxide and ammonia on lignin
Chao Zhao et al.
INDUSTRIAL CROPS AND PRODUCTS (2020)
Bidding strategy for trading wind energy and purchasing reserve of wind power producer - A DRL based approach
Di Cao et al.
INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2020)
A computational study of shape memory effect and pseudoelasticity of NiTi alloy under uniaxial tension during complete and partial phase transformation
Rajat Rastogi et al.
MATERIALS RESEARCH EXPRESS (2019)
A non-isothermal phase field study of the shape memory effect and pseudoelasticity of polycrystalline shape memory alloys
Yuanzun Sun et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Fatigue analysis of shape memory alloy helical springs
Yadollah Mohammad Hashemi et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Modeling microstructure evolution in shape memory alloy rods via Legendre wavelets collocation method
Xuan He et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Shape memory alloy engine for high efficiency low-temperature gradient thermal to electrical conversion
Prashant Kumar et al.
APPLIED ENERGY (2019)
Finite Element Method on Shape Memory Alloy Structure and Its Applications
Bo Zhou et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2019)
Sustainable renewable energy planning and wind farming optimization from a biodiversity perspective
A. Z. Dhunny et al.
ENERGY (2019)
Integration of reversible absorption heat pumps in cogeneration systems: Exergy and economic assessment
Luca Urbanucci et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
A review of deep learning for renewable energy forecasting
Huaizhi Wang et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Energy, exergy, and environmental (3E) assessments of an integrated molten carbonate fuel cell (MCFC), Stirling engine and organic Rankine cycle (ORC) cogeneration system fed by a biomass-fueled gasifier
Akbar Salehi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Achieving renewable energy, climate, and air quality policy goals: Rural residential investment in solar panel
Ozgur Kaya et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)
Ion implantation inducing two-way shape memory effect in Cu-Al-Ni thin films
M. Moran et al.
MATERIALS LETTERS (2019)
Fracture analysis of shape memory alloys in martensite and austenite phase based on the voids behavior
Hossein Bahrami et al.
MECHANICS OF MATERIALS (2019)
Development of nail-anchor strengthening system with iron-based shape memory alloy (Fe-SMA) strips
Emil Fritsch et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Iron-based shape memory alloy (Fe-SMA) for fatigue strengthening of cracked steel bridge connections
Mohammadreza Izadi et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
The effect of shape memory alloys on the ductility of exterior reinforced concrete beam-column joints using the damage plasticity model
Abdulsamee M. Halahla et al.
ENGINEERING STRUCTURES (2019)
Hot deformation behavior of Fe-28Ni-17Co-11.5Al-2.5Ta-0.05B (at.%) shape memory alloy by isothermal compression
S. H. Adarsh et al.
INTERMETALLICS (2019)
Stress relaxation behavior of columnar-grained Cu-Al-Mn shape memory alloys
Hai-You Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Forming and two-way shape memory effect of NiTi alloy induced by laser shock imprinting
Xiong Fei et al.
OPTICS AND LASER TECHNOLOGY (2019)
The determination of offshore wind energy potential of Turkey by using novelty hybrid site selection method
Cem Emeksiz et al.
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2019)
Thermo mechanical analyses and characterizations of TiNiCu shape memory alloy structures developed by laser additive manufacturing
S. Shiva et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Thermal Engine Using Nitinol Wire
Ghaleb Ibrahim et al.
PROCEEDINGS OF 2019 IEEE GLOBAL ENGINEERING EDUCATION CONFERENCE (EDUCON) (2019)
Phase field modeling for cyclic phase transition of NiTi shape memory alloy single crystal with super-elasticity
Xi Xie et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Atomistic study on the super-elasticity of nanocrystalline NiTi shape memory alloy subjected to a cyclic deformation
Bing Wang et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Structural Characterization of Corn Stover Lignin after Hydrogen Peroxide Presoaking Prior to Ammonia Fiber Expansion Pretreatment
Xianliang Qiao et al.
ENERGY & FUELS (2018)
A-micromechanical model for the grain size dependent super-elasticity degeneration of NiTi shape memory alloys
Yu Chao et al.
MECHANICS OF MATERIALS (2018)
Symmetry Groups of the Austenite Lattice and Construction of Self-Accommodation Complexes of Martensite Crystals in Alloys with the Shape-Memory Effect
A. G. Khundjua et al.
MOSCOW UNIVERSITY PHYSICS BULLETIN (2018)
Diffusive Phenomena and the Austenite/Martensite Relative Stability in Cu-Based Shape-Memory Alloys
J. L. Pelegrina et al.
SHAPE MEMORY AND SUPERELASTICITY (2018)
Investigation on Hot Fluid Based Actuation of SMA Spring and Their Application for the Development of Heat Engine
A. Verma et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL AND MATERIALS SCIENCE ENGINEERING: INNOVATION AND RESEARCH-2018 (ICMMSE:IR 2018) (2018)
Application of hydrogen peroxide presoaking prior to ammonia fiber expansion pretreatment of energy crops
Chao Zhao et al.
FUEL (2017)
A thermomechanically coupled finite-strain constitutive model for cyclic pseudoelasticity of polycrystalline shape memory alloys
Jun Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
In-situ investigation of dynamic deformation in NiTi shape memory alloys under laser induced shock
Xi Wang et al.
MECHANICS OF MATERIALS (2017)
A review of constitutive models and modeling techniques for shape memory alloys
Cheikh Cisse et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Output Power Characteristics of a Shape Memory Alloy Engine
Yoshihisa Sato et al.
ELECTRICAL ENGINEERING IN JAPAN (2011)
Performance simulation of solar-boosted ocean thermal energy conversion plant
Noboru Yamada et al.
RENEWABLE ENERGY (2009)
Space power generation with a tether heat engine
Claudio Bombardelli et al.
ACTA ASTRONAUTICA (2008)
Characteristics of a new power generation system with application of a shape memory alloy engine
Yoshihisa Sato et al.
ELECTRICAL ENGINEERING IN JAPAN (2008)
Three-dimensional phenomenological thermodynamic model of pseudoelasticity of shape memory alloys at finite strains
A. Ziolkowski
CONTINUUM MECHANICS AND THERMODYNAMICS (2007)
Thermo-mechanical wave propagations in shape memory alloy rod with phase transformations
L. X. Wang et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2007)
Nanoscale pseudoelasticity of single-crystal Cu-Al-Ni shape-memory alloy induced by cyclic nanoindentation
H. -S. Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Three-dimensional thermomechanical modeling of pseudoelasticity in shape memory alloys with different elastic properties between austenite and martensite
X. M. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Medical applications of shape memory alloys
LG Machado et al.
BRAZILIAN JOURNAL OF MEDICAL AND BIOLOGICAL RESEARCH (2003)
Renewable energy: A viable choice
AV Herzog et al.
ENVIRONMENT (2001)
Energy conversion in shape memory alloy heat engine - Part II: Simulation
JJ Zhu et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2001)
Share Paper
