Related references
Note: Only part of the references are listed.Poly(ε-Caprolactone)/Poly(Lactic Acid) Blends Compatibilized by Peroxide Initiators: Comparison of Two Strategies
Marta Przybysz-Romatowska et al.
POLYMERS (2020)
Toughening of Biodegradable Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Poly(ε-caprolactone) Blends by In Situ Reactive Compatibilization
Peter Zytner et al.
ACS OMEGA (2020)
The properties of chemical cross-linked poly(lactic acid) by bis(tert-butyl dioxy isopropyl) benzene
Xue Ai et al.
POLYMER BULLETIN (2019)
Structural and Thermo-Mechanical Properties of Poly(epsilon-Caprolactone) Modified by Various Peroxide Initiators
Marta Przybysz et al.
POLYMERS (2019)
Compatibility, morphology and mechanical properties of polylactic acid/polyolefin elastomer foams
E. Forghani et al.
JOURNAL OF CELLULAR PLASTICS (2018)
Blending modification of PBS/PLA and its enzymatic degradation
Xueyan Hu et al.
POLYMER BULLETIN (2018)
Polybutylene succinate/cellulose nanocrystals: Role of phthalic anhydride in squeeze oriented bionanocomposites
Xuzhen Zhang et al.
CARBOHYDRATE POLYMERS (2018)
Reactive extrusion of bio-based polymer blends and composites - Current trends and future developments
K. Formela et al.
EXPRESS POLYMER LETTERS (2018)
Formation of 3D networks in polylactic acid by adjusting the cross-linking agent content with respect to processing variables: a simple approach
Roya Pourshooshtar et al.
IRANIAN POLYMER JOURNAL (2018)
Effects of DCP as a free radical producer and HPQM as a biocide on the mechanical properties and antibacterial performance of in situ compatibilized PBS/PLA blends
Panupong Srimalanon et al.
POLYMER TESTING (2018)
Structural, mechanical and thermal behavior assessments of PCL/PHB blends reactively compatibilized with organic peroxides
Marta Przybysz et al.
POLYMER TESTING (2018)
Molecular and Supramolecular Changes in Polybutylene Succinate (PBS) and Polybutylene Succinate Adipate (PBSA) Copolymer during Degradation in Various Environmental Conditions
Michal Puchalski et al.
POLYMERS (2018)
The mechanical, thermal and morphological properties of gamma-irradiated PLA/TAIC and PLA/OvPOSS
Mehmet Kodal et al.
RADIATION PHYSICS AND CHEMISTRY (2018)
Improvement of the compatibility between poly(3-hydroxybutyrate) and poly(8-caprolactone) by reactive extrusion with dicumyl peroxide
D. Garcia-Garcia et al.
EUROPEAN POLYMER JOURNAL (2017)
VULCANIZATION OF RUBBER COMPOUNDS WITH PEROXIDE CURING SYSTEMS
Jan Kruzelak et al.
RUBBER CHEMISTRY AND TECHNOLOGY (2017)
Sustainable biobased blends of poly(lactic acid) (PLA) and poly(glycerol succinate-co-maleate) (PGSMA) with balanced performance prepared by dynamic vulcanization
Oscar Valerio et al.
RSC ADVANCES (2017)
Effect of electron radiation and triallyl isocyanurate on the average molecular weight and crosslinking of poly(ε-caprolactone)
Rafal Malinowski
POLYMERS FOR ADVANCED TECHNOLOGIES (2016)
Poly(lactic acid)-Mass production, processing, industrial applications, and end of life
E. Castro-Aguirre et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
PLA composites: From production to properties
Marius Murariu et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review
Shady Farah et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Stability studies of plasma modification effects of polylactide and polycaprolactone surface layers
Krzysztof Moraczewski et al.
APPLIED SURFACE SCIENCE (2016)
Mechanical properties of PLA/PCL blends crosslinked by electron beam and TAIC additive
Rafal Malinowski
CHEMICAL PHYSICS LETTERS (2016)
Poly(butylene succinate)-based polyesters for biomedical applications: A review
Matteo Gigli et al.
EUROPEAN POLYMER JOURNAL (2016)
An Ultraviolet-Induced Reactive Extrusion To Control Chain Scission and Long-Chain Branching Reactions of Polylactide
Chang-Qian Chen et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Formation of Interfacial Janus Nanomicelles by Reactive Blending and Their Compatibilization Effects on Immiscible Polymer Blends
Hengti Wang et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2016)
Effect of high energy β-radiation and addition of triallyl isocyanurate on the selected properties of polylactide
Rafal Malinowski
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2016)
Photochemically cross-linked poly(ε-caprolactone) with accelerated hydrolytic degradation
Csaba Kosa et al.
EUROPEAN POLYMER JOURNAL (2015)
Development of a Reactive Compatibilizer-Tracer for Studying Reactive Polymer Blends in a Twin-Screw Extruder
Wei-Yun Ji et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Role of Interfacial Tension of Solvating Diluents and Hydrophilic-Hydrophobic Cross-Linkers in Hyper-Cross-Linked Solid Supports
Sachin Mane et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Improvement of dynamic tensile properties of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) polymer alloys using a crosslinking agent and observation of fracture surfaces
Masahiro Nishida et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)
Characterization of Effects of Silica Nanoparticles on (80/20) PP/PS Blends via Nonlinear Rheological Properties from Fourier Transform Rheology
Reza Salehiyan et al.
MACROMOLECULES (2015)
Improvements in the melt and solid-state properties of poly(lactic acid), poly-3-hydroxyoctanoate and their blends through reactive modification
Manoj Nerkar et al.
POLYMER (2015)
Chain extended poly(3-hydroxybutyrate) with improved rheological properties and thermal stability, through reactive modification in the melt state
Ahmad Rezaei Kolahchi et al.
POLYMER DEGRADATION AND STABILITY (2015)
Modified biopolymer-dextrin based crosslinked hydrogels: application in controlled drug delivery
Dipankar Das et al.
RSC ADVANCES (2015)
Peroxide induced cross-linking by reactive melt processing of two biopolyesters: Poly(3-hydroxybutyrate) and poly(L-lactic acid) to improve their melting processability
Liqing Wei et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Evidences of Transesterification, Chain Branching and Cross-Linking in a Biopolyester Commercial Blend upon Reaction with Dicumyl Peroxide in the Melt
Francesca Signori et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Compatibilization strategies in poly(lactic acid)-based blends
Jian-Bing Zeng et al.
RSC ADVANCES (2015)
Partially bio-based thermoplastic elastomers by physical blending of poly(hydroxyalkanoate)s and poly(ethylene-co-vinyl acetate)
P. Ma et al.
EXPRESS POLYMER LETTERS (2014)
Polyhydroxyalkanoate (PHA): Review of synthesis, characteristics, processing and potential applications in packaging
E. Bugnicourt et al.
EXPRESS POLYMER LETTERS (2014)
Preparation and Characterization of High-Melt-Strength Polylactide with Long-Chain Branched Structure through γ-Radiation-Induced Chemical Reactions
Hongjun Xu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Morphology, Rheology, Crystallization Behavior, and Mechanical Properties of Poly(lactic acid)/Poly(butylene succinate)/Dicumyl Peroxide Reactive Blends
Deyun Ji et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Crystallization Behavior of Partially Crosslinked Poly(β-hydroxyalkonates)/Poly(butylene succinate) Blends
Piming Ma et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Improving the miscibility of biodegradable polyester/polyphosphazene blends using cross-linkable polyphosphazene
Dingying Shan et al.
BIOMEDICAL MATERIALS (2014)
Compatibilization in bio-based and biodegradable polymer blends
B. Imre et al.
EUROPEAN POLYMER JOURNAL (2013)
Rheological properties and foam preparation of biodegradable poly(butylene succinate)
Guan Li et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Preparation of melting-free poly(lactic acid) by amorphous and crystal crosslinking under UV irradiation
Gwang-Hoe Koo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
The preparation and crystallization of long chain branching polylactide made by melt radicals reaction
Jinxiu You et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effect of partial crosslinking on morphology and properties of the poly(β-hydroxybutyrate)/poly(D,L-lactic acid) blends
Weifu Dong et al.
POLYMER DEGRADATION AND STABILITY (2013)
Bimodal architecture and rheological and foaming properties for gamma-irradiated long-chain branched polylactides
Huagao Fang et al.
RSC ADVANCES (2013)
Sustainability of bio-based plastics: general comparative analysis and recommendations for improvement
Clara Rosalia Alvarez-Chavez et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Toughening of PHBV/PBS and PHB/PBS Blends via In situ Compatibilization Using Dicumyl Peroxide as a Free-Radical Grafting Initiator
Piming Ma et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2012)
Production and characterization of PHA from recombinant E. coli harbouring phaC1 gene of indigenous Pseudomonas sp. LDC-5 using molasses
V Saranya et al.
BRAZILIAN JOURNAL OF MICROBIOLOGY (2011)
Bio-based blends of starch and poly(butylene succinate) with improved miscibility, mechanical properties, and reduced water absorption
Jian-Bing Zeng et al.
CARBOHYDRATE POLYMERS (2011)
Influence of Dicumyl Peroxide Content on Thermal and Mechanical Properties of Polylactide
P. Rytlewski et al.
INTERNATIONAL POLYMER PROCESSING (2011)
Rheological and Topological Characterizations of Electron Beam Irradiation Prepared Long-Chain Branched Polylactic Acid
Yongbin Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Electron-beam treatment of poly(lactic acid) to control degradation profiles
Marie-Louise Cairns et al.
POLYMER DEGRADATION AND STABILITY (2011)
Mechanical Properties of Poly(Butylene Succinate) Reinforced with Continuously Steam-Exploded Cotton Stalk Bast
Jin-ping Qu et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2011)
Poly(butylene succinate) and its copolymers: Research, development and industrialization
Jun Xu et al.
BIOTECHNOLOGY JOURNAL (2010)
The effect of free radical reactions on structure and properties of poly(lactic acid) (PLA) based blends
Maria-Beatrice Coltelli et al.
POLYMER DEGRADATION AND STABILITY (2010)
Molecular characterization and crystallization behavior of peroxide-induced slightly crosslinked poly(L-lactide) during extrusion
Masumi Takamura et al.
POLYMER JOURNAL (2010)
Influence of some crosslinking agents on thermal and mechanical properties of electron beam irradiated polylactide
Piotr Rytlewski et al.
RADIATION PHYSICS AND CHEMISTRY (2010)
The return of a forgotten polymer-Polycaprolactone in the 21st century
Maria Ann Woodruff et al.
PROGRESS IN POLYMER SCIENCE (2010)
Preparation, characterization and hydrolytic degradation of poly[p-dioxanone-(butylene succinate)] multiblockcopolymer
Song-Dong Ding et al.
EUROPEAN POLYMER JOURNAL (2009)
Structure-rheology relationships of long-chain branched polypropylene: Comparative analysis of acrylic and allylic coagent chemistry
J. Scott Parent et al.
POLYMER (2009)
Toughening Modification of PLLA/PBS Blends via In Situ Compatibilization
Ruyin Wang et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Sustainability of biobased and biodegradable plastics
Kumar Sudesh et al.
CLEAN-SOIL AIR WATER (2008)
Effect of type of peroxide on cross-linking of poly(L-lactide)
Masumi Takamura et al.
POLYMER DEGRADATION AND STABILITY (2008)
Thermal and mechanical properties of chemical crosslinked polylactide (PLA)
Sen-lin Yang et al.
POLYMER TESTING (2008)
Effect of peroxide crosslinking on thermal and mechanical properties of poly(ε-caprolactone)
Changyu Han et al.
POLYMER INTERNATIONAL (2007)
Compostability of bioplastic packaging materials: An overview
Gaurav Kale et al.
MACROMOLECULAR BIOSCIENCE (2007)
The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends
Takeshi Semba et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Hydrolytic degradation of electron beam irradiated high molecular weight and non-irradiated moderate molecular weight PLLA
SCJ Loo et al.
ACTA BIOMATERIALIA (2006)
Radical-mediated modification of polypropylene: Selective grafting via polyallyl coagents
SS Sengupta et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2005)
Synthesis of poly(lactic acid): A review
R Mehta et al.
JOURNAL OF MACROMOLECULAR SCIENCE-POLYMER REVIEWS (2005)
Crosslinking of poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)] using dicumyl peroxide as initiator
B Fei et al.
POLYMER INTERNATIONAL (2004)
Definitions of terms related to polymer blends, composites, and multiphase polymeric materials - (IUPAC recommendations 2004)
WJ Work et al.
PURE AND APPLIED CHEMISTRY (2004)
Radiation crosslinking of poly(butylene succinate) in the presence of low concentrations of trimethallyl isocyanurate and its properties
M Suhartini et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Structure-property relationship in biodegradable poly(butylene succinate)/layered silicate nanocomposites
SS Ray et al.
MACROMOLECULES (2003)
Compatibilization of polymer blends
LA Utracki
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2002)
Modification of poly(butylene succinate) with peroxide: Crosslinking, physical and thermal properties, and biodegradation
DJ Kim et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2001)
Peroxide vulcanization of elastomers
PR Dluzneski
RUBBER CHEMISTRY AND TECHNOLOGY (2001)
A literature review of poly(lactic acid)
D Garlotta
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2001)
Synthesis and characterization of biodegradable poly(butylene succinate-co-butylene adipate)s
MS Nikolic et al.
POLYMER DEGRADATION AND STABILITY (2001)
Degradation of poly(L-lactic acid) by gamma-irradiation
P Nugroho et al.
POLYMER DEGRADATION AND STABILITY (2001)
Radiation crosslinking of biodegradable poly(butylene succinate) at high temperature
CL Song et al.
JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY (2001)
Processing materials with microwave energy
DE Clark et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
