Related references
Note: Only part of the references are listed.Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes
Alexander Kukay et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)
Mechanical, Electrical, and Ionic Behavior of Lithium-Ion Battery Electrodes via Discrete Element Method Simulations
Clara Sangros Gimenez et al.
ENERGY TECHNOLOGY (2020)
Influence of the Carbon Black Dispersing Process on the Microstructure and Performance of Li-Ion Battery Cathodes
Julian Kristoffer Mayer et al.
ENERGY TECHNOLOGY (2020)
Continuous electrodeposition of silicon and germanium micro/nanowires from their oxides precursors in molten salt
Xingli Zou et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
Synthesis and electrochemical performance of Li1+xTi2-xFex(PO4)3/C anode for aqueous lithium ion battery
Weiwen Meng et al.
ADVANCED POWDER TECHNOLOGY (2020)
Controlling Dendrite Growth in Solid-State Electrolytes
He Liu et al.
ACS ENERGY LETTERS (2020)
Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi0.8Mn0.1Co0.1O2 Cathodes
Ritu Sahore et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Waterproof lithium metal anode enabled by cross-linking encapsulation
Ye Xiao et al.
SCIENCE BULLETIN (2020)
Hierarchically porous nitrogen, oxygen-rich carbons derived from filter paper for high-performance lithium ion battery anodes
Junke Ou et al.
POWDER TECHNOLOGY (2020)
Water-processable, sprayable LiFePO4/graphene hybrid cathodes for high-power lithium ion batteries
Ju-Won Jeon et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)
Micro versus Nano: Impact of Particle Size on the Flow Characteristics of Silicon Anode Slurries
Rassmus Andersson et al.
ENERGY TECHNOLOGY (2020)
Electrode material-ionic liquid coupling for electrochemical energy storage
Xuehang Wang et al.
NATURE REVIEWS MATERIALS (2020)
Perspectives on the relationship between materials chemistry and roll-to-roll electrode manufacturing for high-energy lithium-ion batteries
David L. Wood et al.
ENERGY STORAGE MATERIALS (2020)
Improving LiNi0.9Co0.08Mn0.02O2's cyclic stability via abating mechanical damages
Zhongmin Ren et al.
ENERGY STORAGE MATERIALS (2020)
Lithium and transition metal dissolution due to aqueous processing in lithium-ion battery cathode active materials
W. Blake Hawley et al.
JOURNAL OF POWER SOURCES (2020)
Surface Modification of LiNi0.8Co0.15Al0.05O2Particles via Li3PO4Coating to Enable Aqueous Electrode Processing
Michael Hofmann et al.
CHEMSUSCHEM (2020)
Correlating the influence of porosity, tortuosity, and mass loading on the energy density of LiNi0.6Mn0.2Co0.2O2 cathodes under extreme fast charging (XFC) conditions
Dhrupad Parikh et al.
JOURNAL OF POWER SOURCES (2020)
Binder-assisted electrostatic spray deposition of LiCoO2 and graphite films on coplanar interdigitated electrodes for flexible/wearable lithium-ion batteries
Su Chan Lee et al.
JOURNAL OF POWER SOURCES (2020)
Effects of surface modification and organic binder type on cell performance of water-processed Ni-rich Li(Ni0.8Co0.1Mn0.1)O2 cathodes
Sireesha Pedaballi et al.
JOURNAL OF POWER SOURCES (2020)
A novel online moisture monitoring method for vacuum drying of lithium ion battery powder
Fan Zhao et al.
POWDER TECHNOLOGY (2020)
Large-scale production of holey graphite as high -rate anode for lithium ion batteries
Feng Xiao et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
A superb 3D composite lithium metal anode prepared by in-situ lithiation of sulfurized polyacrylonitrile
Huichao Lu et al.
ENERGY STORAGE MATERIALS (2020)
Study of the Reactions between Ni-Rich Positive Electrode Materials and Aqueous Solutions and their Relation to the Failure of Li-Ion Cells
Ines Hamam et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
The role of the pH value in water-based pastes on the processing and performance of Ni-rich LiNi0.5Mn0.3Co0.2O2 based positive electrodes
Lukas Ibing et al.
JOURNAL OF POWER SOURCES (2020)
A review on energy chemistry of fast-charging anodes
Wenlong Cai et al.
CHEMICAL SOCIETY REVIEWS (2020)
Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries
Marissa Wood et al.
ENERGY STORAGE MATERIALS (2020)
The effect of solid content on the rheological properties and microstructures of a Li-ion battery cathode slurry
Lixia Ouyang et al.
RSC ADVANCES (2020)
Recent progress on biomass-derived ecomaterials toward advanced rechargeable lithium batteries
Jia Liu et al.
ECOMAT (2020)
Transition metal coordinated framework porphyrin for electrocatalytic oxygen reduction
Chang-Xin Zhao et al.
CHINESE CHEMICAL LETTERS (2019)
Boosting redox activity on MXene-induced multifunctional collaborative interface in high Li2S loading cathode for high-energy Li-S and metallic Li-free rechargeable batteries
Zhiyu Wang et al.
JOURNAL OF ENERGY CHEMISTRY (2019)
Study of Immersion of LiNi0.5Mn0.3Co0.2O2 Material in Water for Aqueous Processing of Positive Electrode for Li-Ion Batteries
Marie Bichon et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Effects of pH control by acid addition at the aqueous processing of cathodes for lithium ion batteries
Werner Bauer et al.
ELECTROCHIMICA ACTA (2019)
Double-helix-superstructure aqueous binder to boost excellent electrochemical performance in Li-rich layered oxide cathode
Guohua Zhang et al.
JOURNAL OF POWER SOURCES (2019)
Regulating the Inner Helmholtz Plane for Stable Solid Electrolyte Interphase on Lithium Metal Anodes
Chong Yan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Numerical simulation of the behavior of lithium-ion battery electrodes during the calendaring process via the discrete element method
Clara Sangros Gimenez et al.
POWDER TECHNOLOGY (2019)
Electrode-coated alumina separators for lithium-ion batteries - effect of particle size and distribution of alumina powders
N. Kanhere et al.
POWDER TECHNOLOGY (2019)
Hollow cobalt oxide nanoparticles embedded in nitrogen-doped carbon nanosheets as an efficient bifunctional catalyst for Zn-air battery
Yuhui Tian et al.
JOURNAL OF ENERGY CHEMISTRY (2019)
Energy storage: The future enabled by nanomaterials
Ekaterina Pomerantseva et al.
SCIENCE (2019)
Plating/Stripping Behavior of Actual Lithium Metal Anode
He Liu et al.
ADVANCED ENERGY MATERIALS (2019)
Synthesis of LiNi1-xCoxPO4/C nanocomposite cathode for lithium ion batteries by a combination of aerosol and powder technologies
Ye Li et al.
ADVANCED POWDER TECHNOLOGY (2019)
Electrode manufacturing for lithium-ion batteries-Analysis of current and next generation processing
W. Blake Hawley et al.
JOURNAL OF ENERGY STORAGE (2019)
Beneficial rheological properties of lithium-ion battery cathode slurries from elevated mixing and coating temperatures
W. Blake Hawley et al.
JOURNAL OF ENERGY STORAGE (2019)
Effect of calendering and temperature on electrolyte wetting in lithium-ion battery electrodes
Ali Davoodabadi et al.
JOURNAL OF ENERGY STORAGE (2019)
The dendrite growth in 3D structured lithium metal anodes: Electron or ion transfer limitation?
Rui Zhang et al.
ENERGY STORAGE MATERIALS (2019)
Carbon materials for traffic power battery
Lili Jiang et al.
ETRANSPORTATION (2019)
Electrophoretic Deposition for Lithium-Ion Battery Electrode Manufacture
Cornel C. Lalau et al.
BATTERIES & SUPERCAPS (2019)
A review of rechargeable batteries for portable electronic devices
Yeru Liang et al.
INFOMAT (2019)
Controlling of Dispersion State of Particles in Slurry and Electrochemical Properties of Electrodes
Kentaro Kuratani et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Recent advances in understanding dendrite growth on alkali metal anodes
He Liu et al.
ENERGYCHEM (2019)
Clarification of Particle Dispersion Behaviors Based on the Dielectric Characteristics of Cathode Slurry in Lithium-Ion Battery (LIB)
Zhilong Wang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Scalable Dry Processing of Binder-Free Lithium-Ion Battery Electrodes Enabled by Holey Graphene
Dylan J. Kirsch et al.
ACS APPLIED ENERGY MATERIALS (2019)
Lithium-Anode Protection in Lithium-Sulfur Batteries
Chong Yan et al.
TRENDS IN CHEMISTRY (2019)
Artificial Interphases for Highly Stable Lithium Metal Anode
Rui Xu et al.
MATTER (2019)
Expediting redox kinetics of sulfur species by atomic-scale electrocatalysts in lithium-sulfur batteries
Bo-Quan Li et al.
INFOMAT (2019)
Safe and green Li-ion batteries based on LiFePO4 and Li4Ti5O12 sprayed as aqueous slurries with xanthan gum as common binder
Alexandre E. Leonard et al.
MATERIALS TODAY ENERGY (2019)
Disintegration of Meatball Electrodes for LiNi x Mn y Co z O2 Cathode Materials
R. Xu et al.
EXPERIMENTAL MECHANICS (2018)
Comparative Analysis of Aqueous Binders for Acid High-Energy Li-Rich NMC as a Lithium-Ion Cathode and the Impact of Adding Phosphoric
Arefeh Kazzazi et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Structural and mechanical characterization of lithium-ion battery electrodes via DEM simulations
Clara Sangros Gimenez et al.
ADVANCED POWDER TECHNOLOGY (2018)
Complementary Strategies Toward the Aqueous Processing of High-Voltage LiNi0.5Mn1.5O4 Lithium-Ion Cathodes
Matthias Kuenzel et al.
CHEMSUSCHEM (2018)
Analysis of Deposition Methods for Lithium-Ion Battery Anodes Using Reduced Graphene Oxide Slurries on Copper Foil
James Garofalo et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Si Oxidation and H2 Gassing During Aqueous Slurry Preparation for Li-Ion Battery Anodes
Kevin A. Hays et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Enhanced wettability and thermal stability of nano-SiO2/poly(vinyl alcohol)-coated polypropylene composite separators for lithium-ion batteries
Zhixiong Zhang et al.
PARTICUOLOGY (2018)
Improved electrochemical performances of yttrium oxyfluoride-coated Li[Li0.2Mn0.54Ni0.13Co0.13]O-2 for lithium ion batteries
Yaxin Hao et al.
JOURNAL OF ENERGY CHEMISTRY (2018)
Current status and challenges for automotive battery production technologies
Arno Kwade et al.
NATURE ENERGY (2018)
Lithium Nitrate Solvation Chemistry in Carbonate Electrolyte Sustains High-Voltage Lithium Metal Batteries
Chong Yan et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Characterization of Surface Free Energy of Composite Electrodes for Lithium-Ion Batteries
Ali Davoodabadi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
The Origin of the Reduced Reductive Stability of Ion-Solvent Complexes on Alkali and Alkaline Earth Metal Anodes
Xiang Chen et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
A Comprehensive Review of Nanomaterials Developed Using Electrophoresis Process for High-Efficiency Energy Conversion and Storage Systems
Seok Hee Lee et al.
ENERGIES (2018)
Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP
David L. Wood et al.
DRYING TECHNOLOGY (2018)
Alternative binders for sustainable electrochemical energy storage - the transition to aqueous electrode processing and bio-derived polymers
Dominic Bresser et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Ageing and Water-Based Processing of LiFeMnPO4 Secondary Agglomerates and Its Effects on Electrochemical Characteristics
Benjamin Starke et al.
ENERGIES (2017)
Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
Jianlin Li et al.
JOM (2017)
Characterization of the calendering process for compaction of electrodes for lithium-ion batteries
Chris Meyer et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
LiNi0.5Mn1.5O4-based composite electrodes with improved properties prepared by a slurry spray deposition process
Ran Yu et al.
JOURNAL OF POWER SOURCES (2017)
Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries
Mohanad Al-Shroofy et al.
JOURNAL OF POWER SOURCES (2017)
Enabling aqueous processing for crack-free thick electrodes
Zhijia Du et al.
JOURNAL OF POWER SOURCES (2017)
Simulation-Supported Analysis of Calendering Impacts on the Performance of Lithium-Ion-Batteries
Georg Lenze et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Electrode Slurry Particle Density Mapping Using X-ray Radiography
Kenneth Higa et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Mechanistic Understanding of the Role of Evaporation in Electrode Processing
Malcolm Stein et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Understanding Interfacial-Energy-Driven Dry Powder Mixing for Solvent-Free Additive Manufacturing of Li-Ion Battery Electrodes
Brandon Ludwig et al.
ADVANCED MATERIALS INTERFACES (2017)
Water-Soluble Binders for Lithium-Ion Battery Graphite Electrodes: Slurry Rheology, Coating Adhesion, and Electrochemical Performance
Fabian Jeschull et al.
ENERGY TECHNOLOGY (2017)
Improvement of Lithium-Ion Battery Performance by Two-Layered Slot-Die Coating Operation
Darjen Liu et al.
ENERGY TECHNOLOGY (2017)
Calendering of free-standing electrode for lithium-sulfur batteries with high volumetric energy density
Pei-Yan Zhai et al.
CARBON (2017)
Gelation mechanism of organic additives with LiFePO4 in the water-based cathode slurries
Chia-Chen Li et al.
CERAMICS INTERNATIONAL (2017)
Influence of high intensive dry mixing and calendering on relative electrode resistivity determined via an advanced two point approach
Bastian Georg Westphal et al.
JOURNAL OF ENERGY STORAGE (2017)
Delamination behavior of lithium-ion battery anodes: Influence of drying temperature during electrode processing
M. Baunach et al.
DRYING TECHNOLOGY (2016)
In Situ Coating of Li[Ni0.33Mn0.33Co0.33]O2 Particles to Enable Aqueous Electrode Processing
Nicholas Loeffler et al.
CHEMSUSCHEM (2016)
Dispersion, agglomeration, and gelation of LiFePO4 in water-based slurry
Feng-Yen Tsai et al.
JOURNAL OF POWER SOURCES (2016)
The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties
Henrike Bockholt et al.
JOURNAL OF POWER SOURCES (2016)
Impact of the Slurry pH on the Expansion/Contraction Behavior of Silicon/Carbon/Carboxymethylcellulose Electrodes for Li-Ion Batteries
A. Tranchot et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes
Henrike Bockholt et al.
POWDER TECHNOLOGY (2016)
Conveying Advanced Li-ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills
Alexander Kraytsberg et al.
ADVANCED ENERGY MATERIALS (2016)
Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Brandon Ludwig et al.
SCIENTIFIC REPORTS (2016)
Study of Water-Based Lithium Titanate Electrode Processing: The Role of pH and Binder Molecular Structure
Diogo Vieira Carvalho et al.
POLYMERS (2016)
Nanostructured energy materials for electrochemical energy conversion and storage: A review
Xueqiang Zhang et al.
JOURNAL OF ENERGY CHEMISTRY (2016)
A General Method for High-Performance Li-Ion Battery Electrodes from Colloidal Nanoparticles without the Introduction of Binders or Conductive-Carbon Additives: The Cases of MnS, Cu2-xS, and Ge
Don-Hyung Ha et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries
Wen Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Aqueous slurry of S-doped carbon nanotubes as conductive additive for lithium ion batteries
Chuanlei Qi et al.
CARBON (2015)
Stress Development of Li-Ion Battery Anode Slurries during the Drying Process
Sanghyuk Lim et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries
Werner Bauer et al.
JOURNAL OF POWER SOURCES (2015)
Prospects for reducing the processing cost of lithium ion batteries
David L. Wood et al.
JOURNAL OF POWER SOURCES (2015)
Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes
Valentin Wenzel et al.
ENERGY TECHNOLOGY (2015)
Rheological properties and stability of NMP based cathode slurries for lithium ion batteries
Werner Bauer et al.
CERAMICS INTERNATIONAL (2014)
A Raman spectroscopic method to find binder distribution in electrodes during drying
Hideki Hagiwara et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2014)
Stress development and film formation in multiphase composite latexes
Kyle Price et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2014)
A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties
Boris Bitsch et al.
JOURNAL OF POWER SOURCES (2014)
Mesoscale Elucidation of the Influence of Mixing Sequence in Electrode Processing
Zhixiao Liu et al.
LANGMUIR (2014)
A micromechanical model for effective conductivity in granular electrode structures
Julia Ott et al.
ACTA MECHANICA SINICA (2013)
Optimization of multicomponent aqueous suspensions of lithium iron phosphate (LiFePO4) nanoparticles and carbon black for lithium-ion battery cathodes
Jianlin Li et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)
Gelation or dispersion of LiFePO4 in water-based slurry?
Jyh-Cheng Tsai et al.
JOURNAL OF POWER SOURCES (2013)
Fast Dynamics and Relaxation of Colloidal Drops during the Drying Process Using Multispeckle Diffusing Wave Spectroscopy
Jeong Yong Lee et al.
LANGMUIR (2013)
Latex Migration in Battery Slurries during Drying
Sanghyuk Lim et al.
LANGMUIR (2013)
Drying of a Charge-Stabilized Colloidal Suspension in Situ Monitored by Vertical Small-Angle X-ray Scattering
Sunhyung Kim et al.
LANGMUIR (2013)
Intensive Dry and Wet Mixing Influencing the Structural and Electrochemical Properties of Secondary Lithium-Ion Battery Cathodes
H. Bockholt et al.
LITHIUM-ION BATTERIES -AND- NON-AQUEOUS ELECTROLYTES FOR LITHIUM BATTERIES - PRIME 2012 (2013)
Lithium ion battery production
Antti Vayrynen et al.
JOURNAL OF CHEMICAL THERMODYNAMICS (2012)
Calendering effects on the physical and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 cathode
Honghe Zheng et al.
JOURNAL OF POWER SOURCES (2012)
Superior Performance of LiFePO4 Aqueous Dispersions via Corona Treatment and Surface Energy Optimization
Jianlin Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing
Jianlin Li et al.
LANGMUIR (2012)
Binder-Free and Carbon-Free Nanoparticle Batteries: A Method for Nanoparticle Electrodes without Polymeric Binders or Carbon Black
Don-Hyung Ha et al.
NANO LETTERS (2012)
Effect of soluble polymer binder on particle distribution in a drying particulate coating
Felix Buss et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2011)
Materials processing for lithium-ion batteries
Jianlin Li et al.
JOURNAL OF POWER SOURCES (2011)
Binder Distributions in Water-Based and Organic-Based LiCoO2 Electrode Sheets and Their Effects on Cell Performance
Chia-Chen Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
The effect of adsorption kinetics on film formation of silica/PVA suspension
Sunhyung Kim et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2010)
Effect of slurry preparation process on electrochemical performances of LiCoO2 composite electrode
Gil-Won Lee et al.
JOURNAL OF POWER SOURCES (2010)
High Performance LiCoO2 Cathode Materials at 60 degrees C for Lithium Secondary Batteries Prepared by the Facile Nanoscale Dry-Coating Method
Yonghyun Cho et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
Nanostructured materials for electrochemical energy conversion and storage devices
Yu-Guo Guo et al.
ADVANCED MATERIALS (2008)
High-performance lithium battery anodes using silicon nanowires
Candace K. Chan et al.
NATURE NANOTECHNOLOGY (2008)
Nanosize effect on high-rate Li-ion intercalation in LiCoO2 electrode
Masashi Okubo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2007)
Improvements of dispersion homogeneity and cell performance of aqueous-processed LiCoO2 cathodes by using dispersant of PAA-NH4
CC Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)