Related references
Note: Only part of the references are listed.Generalized Stacking Fault Energy of Al-Doped CrMnFeCoNi High-Entropy Alloy
Xun Sun et al.
NANOMATERIALS (2020)
Enhanced strength and ductility of Al0.9CoCrNi2.1 eutectic high entropy alloy by thermomechanical processing
Xi Jin et al.
MATERIALIA (2020)
Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures
Qingqing Ding et al.
MATERIALS TODAY (2019)
Simultaneous enhancement of strength and ductility through coordination deformation and multi-stage transformation induced plasticity (TRIP) effect in heterogeneous metastable austenitic steel
Chengshuai Lei et al.
SCRIPTA MATERIALIA (2019)
Enhanced strength-ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae
Peijian Shi et al.
NATURE COMMUNICATIONS (2019)
Identification of Novel Regulatory Genes in APAP Induced Hepatocyte Toxicity by a Genome-Wide CRISPR-Cas9 Screen
Katherine Shortt et al.
SCIENTIFIC REPORTS (2019)
Perspective on hetero-deformation induced (HDI) hardening and back stress
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2019)
Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys
S. R. Reddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Al solute concentration on mechanical properties of AlxFeCuCrNi high-entropy alloys: A first-principles study
Qingkun Zhao et al.
PHYSICA B-CONDENSED MATTER (2019)
Tuning element distribution, structure and properties by composition in high-entropy alloys
Qingqing Ding et al.
NATURE (2019)
Strategies for improving the sustainability of structural metals
Dierk Raabe et al.
NATURE (2019)
Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior
Zhiming Li
ACTA MATERIALIA (2019)
Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds
Deep Choudhuri et al.
ACTA MATERIALIA (2019)
Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures
C. E. Slone et al.
ACTA MATERIALIA (2019)
Tailoring heterogeneities in high-entropy alloys to promote strength-ductility synergy
Evan Ma et al.
NATURE COMMUNICATIONS (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing
Bharat Gwalani et al.
ACTA MATERIALIA (2018)
Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures
Yan Ma et al.
ACTA MATERIALIA (2018)
High-Strength Nanotwinned Al Alloys with 9R Phase
Qiang Li et al.
ADVANCED MATERIALS (2018)
Simultaneous enhancement of strength and ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy via friction stir processing
Tianhao Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure
Jiansheng Li et al.
JOURNAL OF MATERIALS SCIENCE (2018)
A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties
Xi Jin et al.
MATERIALS LETTERS (2018)
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
Leifeng Liu et al.
MATERIALS TODAY (2018)
Interface affected zone for optimal strength and ductility in heterogeneous laminate
C. X. Huang et al.
MATERIALS TODAY (2018)
Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength
Muxin Yang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)
Strong and ductile medium Mn steel without transformation-induced plasticity effect
B. B. He et al.
MATERIALS RESEARCH LETTERS (2018)
High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys
Yao-Jian Liang et al.
NATURE COMMUNICATIONS (2018)
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Zhifeng Lei et al.
NATURE (2018)
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
T. Yang et al.
SCIENCE (2018)
A novel ultrafine-grained Fe-22Mn-0.6C TWIP steel with superior strength and ductility
Y. Z. Tian et al.
MATERIALS CHARACTERIZATION (2017)
Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals
Evan Ma et al.
MATERIALS TODAY (2017)
High-velocity projectile impact induced 9R phase in ultrafine-grained aluminium
Sichuang Xue et al.
NATURE COMMUNICATIONS (2017)
New twinning route in face-centered cubic nanocrystalline metals
Lihua Wang et al.
NATURE COMMUNICATIONS (2017)
The influence of Al elements on the structure and the creep behavior of AlxCoCrFeNi high entropy alloys
Tieshan Cao et al.
MATERIALS LETTERS (2016)
Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing
I. S. Wani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off
Zhiming Li et al.
NATURE (2016)
Ultrafine-Grained AlCoCrFeNi2.1 Eutectic High-Entropy Alloy
I. S. Wani et al.
MATERIALS RESEARCH LETTERS (2016)
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
B. Schuh et al.
ACTA MATERIALIA (2015)
Ultrahigh strength nano/ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment
G. S. Sun et al.
MATERIALS CHARACTERIZATION (2015)
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
ZiJiao Zhang et al.
NATURE COMMUNICATIONS (2015)
High Strength and High Uniform Ductility in a Severely Deformed Iron Alloy by Lattice Softening and Multimodal-structure Formation
Kaveh Edalati et al.
MATERIALS RESEARCH LETTERS (2015)
Effect of Al content on the microstructure and mechanical behavior of two-phase FeNiMnAl alloys
Fanling Meng et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Yiping Lu et al.
SCIENTIFIC REPORTS (2014)
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
G. Liu et al.
NATURE MATERIALS (2013)
Structure and stability of Σ3 grain boundaries in face centered cubic metals
J. Wang et al.
PHILOSOPHICAL MAGAZINE (2013)
The separation of recrystallization and precipitation processes in a cold-rolled Al-Mg-Sc solid solution
Wen Yang et al.
SCRIPTA MATERIALIA (2013)
Sunflower-like Solidification Microstructure in a Near-eutectic High-entropy Alloy
Sheng Guo et al.
MATERIALS RESEARCH LETTERS (2013)
Recrystallization behavior, microstructure evolution and mechanical properties of biodegradable Fe-Mn-C(-Pd) TWIP alloys
Michael Schinhammer et al.
ACTA MATERIALIA (2012)
Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe-Mn-Al-C steel
I. Gutierrez-Urrutia et al.
ACTA MATERIALIA (2012)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy
S. Singh et al.
ACTA MATERIALIA (2011)
The conflicts between strength and toughness
Robert O. Ritchie
NATURE MATERIALS (2011)
Strong crystal size effect on deformation twinning
Qian Yu et al.
NATURE (2010)
Influence of specimen dimensions and strain measurement methods on tensile stress-strain curves
Y. H. Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials
Z. W. Wang et al.
SCRIPTA MATERIALIA (2009)
Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu
Y. H. Zhao et al.
SCRIPTA MATERIALIA (2008)
Simultaneously increasing the ductility and strength of ultra-fine-grained pure copper
Yong-Hao Zhao et al.
ADVANCED MATERIALS (2006)
Shockley partial dislocations to twin: Another formation mechanism and generic driving force
J Wang et al.
APPLIED PHYSICS LETTERS (2004)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Deformation mechanism in nanocrystalline Al: Partial dislocation slip
XZ Liao et al.
APPLIED PHYSICS LETTERS (2003)
Deformation twinning in nanocrystalline aluminum
MW Chen et al.
SCIENCE (2003)
High tensile ductility in a nanostructured metal
YM Wang et al.
NATURE (2002)