Effect of hydrogen on the embrittlement susceptibility of Fe-22Mn-0.6C TWIP steel revealed by in-situ tensile tests

The hydrogen embrittlement (HE) behavior on a Fe-22Mn-0.6C twinning-induced plasticity (TWIP) steel was investigated by tensile tests with in-situ scanning electron microscope observation combined with electron backscatter diffraction (EBSD) and electron channeling contrast imaging (ECCI) techniques. The tensile test specimens were cathodically pre-charged with hydrogen for 0, 50, 150, and 300 h, which accumulatively reduced the mechanical properties and induced a ductile-to-brittle fracture transition. The threshold of hydrogen content to trigger this ductile-to-brittle transition was further determined by combined thermal desorption spectroscopy (TDS) analysis and theoretical hydrogen diffusion calculation. During the tensile tests, intergranular secondary cracks were observed on the gauge surfaces of the specimens with pre-charged hydrogen. The low angle grain boundaries (LAGBs) exhibited better resistance to both crack initiation and propagation compared with high angle grain boundaries (HAGBs). In addition, the stress concentration together with the hydrogen effect on grain boundaries intersected with deformation twins are proposed as the reasons for the crack initiation and propagation.Y

Automated summary

The hydrogen embrittlement behavior of Fe-22Mn-0.6C TWIP steel was studied using in-situ SEM observation, EBSD, and ECCI techniques. Hydrogen pre-charging decreased mechanical properties and caused a ductile-to-brittle fracture transition. The threshold hydrogen content for this transition was determined using TDS analysis and hydrogen diffusion calculation. LAGBs showed better resistance to crack initiation and propagation compared to HAGBs, with stress concentration and hydrogen effects at grain boundaries intersecting with deformation twins identified as reasons for crack initiation and propagation.