Related references
Note: Only part of the references are listed.Low-velocity impact of multilayer sandwich beams with metal foam cores: Analytical, experimental, and numerical investigations
Jianxun Zhang et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2020)
Mechanical properties of hybrid metamaterial with auxetic chiral cellular structure and silicon filler
Nejc Novak et al.
COMPOSITE STRUCTURES (2020)
Programmable Buckling-based negative stiffness metamaterial
Xiaojun Tan et al.
MATERIALS LETTERS (2020)
Tunable tensile response of honeycomb plates with nanoscale thickness: Testing and modeling
Pengcheng Jiao et al.
EXTREME MECHANICS LETTERS (2020)
Experimental and computational analysis of the uni-directional porous (UniPore) copper mechanical response at high-velocity impact
Masatoshi Nishi et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
Effects of impactor shape on the deformation and energy absorption of closed cell aluminium foams under low velocity impact
M. A. Islam et al.
MATERIALS & DESIGN (2020)
Time-lapse micro-CT analysis of fatigue microcrack propagation in cortical bone
T. Fila et al.
JOURNAL OF INSTRUMENTATION (2020)
In-situ X-ray Differential Micro-tomography for Investigation of Water-weakening in Quasi-brittle Materials Subjected to Four-point Bending
Petr Koudelka et al.
MATERIALS (2020)
Compressive behaviour of chiral auxetic cellular structures at different strain rates
Nejc Novak et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
Drop Impact of Closed-Cell Aluminum Foam: Experiment and Simulation
Bahman Taherkhani et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2020)
Blast response study of the sandwich composite panels with 3D chiral auxetic core
Nejc Novak et al.
COMPOSITE STRUCTURES (2019)
Automated Continuous Production Line of Parts Made of Metallic Foams
Isabel Duarte et al.
METALS (2019)
Low-cycle fatigue life of thin-plate auxetic cellular structures made from aluminium alloy 7075-T651
Dejan Tomazincic et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Characterization and physical properties of aluminium foam-polydimethylsiloxane nanocomposite hybrid structures
Susana C. Pinto et al.
COMPOSITE STRUCTURES (2019)
Impact perforation of aluminium Cymat foam
I Elnasri et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors
Ying Jiang et al.
ADVANCED MATERIALS (2018)
Crush performance of multifunctional hybrid foams based on an aluminium alloy open-cell foam skeleton
Isabel Duarte et al.
POLYMER TESTING (2018)
Mechanical properties of sandwich composites with 3d-printed auxetic and non-auxetic lattice cores under low velocity impact
Shaoyu Hou et al.
MATERIALS & DESIGN (2018)
Three-dimensional modelling of auxetic sandwich panels for localised impact resistance
Gabriele Imbalzano et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2017)
Fatigue properties of expanded perlite/aluminum syntactic foams
Mehdi Taherishargh et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Meso-scale mechanism of compaction shock propagation in cellular materials
C. Q. Xi et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
Deformation analysis of gellan-gum based bone scaffold using on-the-fly tomography
Daniel Kytyr et al.
MATERIALS & DESIGN (2017)
Response Analysis of Blast Impact Loading of Metal-Foam Sandwich Panels
Sigit P. Santosa et al.
PLASTICITY AND IMPACT MECHANICS (2017)
Dynamic characteristics of aluminium foams under impact crushing
Xin Pang et al.
COMPOSITES PART B-ENGINEERING (2017)
Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading
Thomas Tancogne-Dejean et al.
ACTA MATERIALIA (2016)
Compressive behaviour of unconstrained and constrained integral-skin closed-cell aluminium foam
Isabel Duarte et al.
COMPOSITE STRUCTURES (2016)
Strain-rate effects in Ni/Al composite metal foams from quasi-static to low-velocity impact behaviour
A. Jung et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Investigation on dynamic penetration of closed-cell aluminium foam using in situ deceleration measurement
Xin Pang et al.
COMPOSITES PART B-ENGINEERING (2016)
Effect of impactor shapes on the low velocity impact damage of sandwich composite plate: Experimental study and modelling
Ali Kursun et al.
COMPOSITES PART B-ENGINEERING (2016)
Dual-energy X-ray micro-CT imaging of hybrid Ni/Al open-cell foam
T. Fila et al.
JOURNAL OF INSTRUMENTATION (2016)
COMPRESSIVE PROPERTIES OF AUXETIC STRUCTURES PRODUCED WITH DIRECT 3D PRINTING
Petr Koudelka et al.
MATERIALI IN TEHNOLOGIJE (2016)
Quasi-static characterisation and impact testing of auxetic foam for sports safety applications
Olly Duncan et al.
SMART MATERIALS AND STRUCTURES (2016)
Auxetic Cellular Materials - a Review
Nejc Novak et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2016)
Development of a Hopkinson Bar Apparatus for Testing Soft Materials: Application to a Closed-Cell Aluminum Foam
Marco Peroni et al.
MATERIALS (2016)
A two-phase model to simulate the 1-D shock wave propagation in porous metal foam
V. R. Feldgun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)
Drop weight impact behavior of functionally graded aluminum foam consisting of A1050 and A6061 aluminum alloys
Yoshihiko Hangai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading
Pengfei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Using Digital Image Correlation (DIC) in Dynamic Punch Tests
J. T. Hammer et al.
EXPERIMENTAL MECHANICS (2015)
Characterisation of aluminium matrix syntactic foams under drop weight impact
M. Altenaiji et al.
MATERIALS & DESIGN (2014)
Experimental studies on the impact properties of auxetic materials
T. C. Lim et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2014)
Variation of quasi-static and dynamic compressive properties in single Aluminium-alloy foam block
Isabel Duarte et al.
8TH INTERNATIONAL CONFERENCE ON POROUS METALS AND METALLIC FOAMS (2014)
Applications of aluminum hybrid foam sandwiches in battery housings for electric vehicles
Joachim Baumeister et al.
8TH INTERNATIONAL CONFERENCE ON POROUS METALS AND METALLIC FOAMS (2014)
The impact response of graded foam sandwich structures
J. Zhou et al.
COMPOSITE STRUCTURES (2013)
Low-velocity impact response of fully clamped metal foam core sandwich beam incorporating local denting effect
Qinghua Qin et al.
COMPOSITE STRUCTURES (2013)
Impact damage characteristics in reinforced woven natural silk/epoxy composite face-sheet and sandwich foam, coremat and honeycomb materials
A. U. Ude et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
Impact behaviour testing of aluminium foam
M. Peroni et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
X-ray and finite element analysis of deformation response of closed-cell metal foam subjected to compressive loading
O. Jirousek et al.
JOURNAL OF INSTRUMENTATION (2013)
The blast and impact loading of aluminium foam
R. P. Merrett et al.
MATERIALS & DESIGN (2013)
Dynamic crushing of cellular materials: Continuum-based wave models for the transitional and shock modes
Zhijun Zheng et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)
Inertia effects on the progressive crushing of aluminium honeycombs under impact loading
B. Hou et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Impact fracture behavior at the material of aluminum foam
Jae Ung Cho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Analysis of anisotropy and strain rate sensitivity of open-cell metal foam
M. Vesenjak et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
On the behaviour characterization of metallic cellular materials under impact loading
Dai-Ning Fang et al.
ACTA MECHANICA SINICA (2010)
A wave propagation model for the high velocity impact response of a composite sandwich panel
Michelle S. Hoo Fatt et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Full Field Strain Measurement in Compression and Tensile Split Hopkinson Bar Experiments
A. Gilat et al.
EXPERIMENTAL MECHANICS (2009)
Modeling loading rate effect on crushing stress of metallic cellular materials
G. W. Ma et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)
Aluminium foam-polymer composites: processing and characteristics
Karsten Stobener et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Numerical simulation of drop weight impact behaviour of closed cell aluminium foam
R. Rajendran et al.
MATERIALS & DESIGN (2009)
Microtomography on polypropylene foam under dynamic loading: 3D analysis of bead morphology evolution
Philippe Viot et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Shock enhancement of cellular structures under impact loading: Part I experiments
I. Elnasri et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2007)
Characterization of viscoelastic properties of polymer bar using iterative deconvolution in the time domain
Qunli Liu et al.
MECHANICS OF MATERIALS (2006)
High strain rate tensile testing of automotive aluminum alloy sheet
R Smerd et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2005)
High-velocity plate impact of metal foams
SL Lopatnikov et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2004)
Impact energy absorption in an A1 foam at low velocities
S Ramachandra et al.
SCRIPTA MATERIALIA (2003)
Dynamics of metal foam deformation during Taylor cylinder-Hopkinson bar impact experiment
SL Lopatnikov et al.
COMPOSITE STRUCTURES (2003)
An optimisation method for separating and rebuilding one-dimensional dispersive waves from multi-point measurements. Application to elastic or viscoelastic bars
MN Bussac et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
A study of aluminium foam formation - Kinetics and microstructure
I Duarte et al.
ACTA MATERIALIA (2000)
Strain rate sensitivity of a closed-cell aluminum foam
A Paul et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
High strain rate compressive behaviour of aluminium alloy foams
VS Deshpande et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2000)
Share Paper
