Related references
Note: Only part of the references are listed.Thermodynamics and kinetics of phase transformation in rare earth-magnesium alloys: A critical review
Qun Luo et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Microstructure and oxidation resistance of a multiphase Mo-Si-B ceramic coating on Mo substrates deposited by a plasma transferred arc process
Xinke Deng et al.
CERAMICS INTERNATIONAL (2019)
Variation of phase composition of Mo-Si-B alloys induced by boron and their mechanical properties and oxidation resistance
Rui Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Fabrication, characterization and optimization of high conductivity and high quality nanocrystalline molybdenum thin films
Anil K. Battu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Polymer derived ceramic materials from Si, B and MoSiB filler-loaded perhydropolysilazane precursor for oxidation protection
Iryna Smokovych et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Effect of thermodynamically metastable components on mechanical and oxidation properties of the thermal-sprayed MoSi2 based composite coating
Jia Sun et al.
CORROSION SCIENCE (2019)
Effect of moist environment on the oxidation behavior of Mo76-xSi14B10Fex (x=0, 0.5, 1 at.%) ultrafine composites in the range of 700-800 °C
N. K. Kumar et al.
CORROSION SCIENCE (2019)
High-temperature oxidation and plasma torch testing of MoSi2-HfB2-MoB ceramics with single-level and two-level structure
A. Yu. Potanin et al.
CORROSION SCIENCE (2019)
Volume and size effects of intermetallic compounds on the high-temperature oxidation behavior of Mo-Si-B alloys
Won June Choi et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Theoretical prediction on the stability, electronic structure, room and elevated temperature properties of a new MAB phase Mo2AlB2
Yanchun Zhou et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Growth kinetics and isothermal oxidation behavior of a Si pack cementation-coated Mo-Si-B alloy
Kwangsu Choi et al.
APPLIED SURFACE SCIENCE (2019)
Oxidation behaviours of ZrB2-SiC-MoSi2 composites at 1800 degrees C in air with different pressures
Yang Yang et al.
CORROSION SCIENCE (2019)
Effect of Fe addition and moist environment on the high temperature oxidation behavior of Mo76-xSi14B10Fex (x=0, 0.5, 1 at.%) composites
N. K. Kumar et al.
INTERMETALLICS (2019)
Constructing two-scale network microstructure with nano-Ti5Si3 for superhigh creep resistance
Y. Jiao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Characterization and oxidation resistance of B-modified Mo3Si coating on Mo substrate
Xinke Deng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Creep and High-Temperature Deformation of Metals and Alloys
Elisabetta Gariboldi et al.
METALS (2019)
Kinetics in Mg-based hydrogen storage materials: Enhancement and mechanism
Qun Luo et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2019)
Synthesis and stabilization of a new phase regime in a Mo-Si-B based alloy by laser-based additive manufacturing
S. K. Makineni et al.
ACTA MATERIALIA (2018)
Effect of Boron Content on Microstructure, Mechanical Properties, and Oxidation Resistance of Mo-Si-B Composites
Jianhui Yan et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Improvement of oxidation resistance of a Mo-62Si-5B (at.%) alloy at 1250 °C and 1350 °C via an in situ pre-formed SiO2 fabricated by spark plasma sintering
S. H. Wen et al.
CORROSION SCIENCE (2017)
Characterization of microstructure and oxidation resistance of Y and Ge modified silicide coating on Nb-Si based alloy
Wan Wang et al.
CORROSION SCIENCE (2016)
Dislocation climb in Mo5SiB2 during high-temperature deformation
Kunming Pan et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)
Mechanically activated combustion synthesis of molybdenum borosilicides for ultrahigh-temperature structural applications
Alan A. Esparza et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Influence of ZrB2 Nanoparticles on the Mechanical and Thermal Behaviors of Carbon Nanotube Reinforced Resol Composite
Zahra Amirsardari et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Influence of sintering temperature, SiC particle size and Y2O3 addition on the densification, microstructure and oxidation resistance of ZrB2-SiC ceramics
Z. Kovacova et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Mechanisms of oxide scale formation on yttrium-alloyed Mo-Si-B containing fine-grained microstructure
Sanjib Majumdar et al.
CORROSION SCIENCE (2015)
Microstructural evolution and oxidation behavior of hot-dip 55 wt.% Al-Zn-Si coated steels
Qun Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Characterization of Mo-Si-B Nanocomposite Powders Produced Using Mechanical Alloying and Powder Heat Treatment
Bin Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Preparation, microstructures, mechanical properties and oxidation resistance of SiBCN/ZrB2-ZrN ceramics by reactive hot pressing
Daxin Li et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Polymer-Derived Ceramics as Innovative Oxidation Barrier Coatings for Mo-Si-B Alloys
Georg Hasemann et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Magnetron Sputtered Mo(Six,Al1-x)2 Oxidation Protection Coatings for Mo-Si-B Alloys
Annika Lange et al.
OXIDATION OF METALS (2015)
Mechanically activated combustion synthesis of molybdenum silicides and borosilicides for ultrahigh-temperature structural applications
Mohammad S. Alam et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)
Oxidation mechanisms of lanthanum-alloyed Mo-Si-B
Sanjib Majumdar et al.
CORROSION SCIENCE (2014)
Microstructure and creep properties of a near-eutectic directionally solidified multiphase Mo-Si-B alloy
G. Hasemann et al.
INTERMETALLICS (2014)
Influence of the density of oxide on oxidation kinetics
Kuo-Chih Chou et al.
INTERMETALLICS (2014)
Fabrication of Mo-Si-B intermetallic powder by mechano-chemical process
Seok Hyun Hwang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
The effect of mechanical alloying on microstructure and mechanical properties of MoSi2 prepared by spark plasma sintering
Milad Kermani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
High-Temperature Creep and Oxidation Behavior of Mo-Si-B Alloys with High Ti Contents
Daniel Schliephake et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Improvement of MoSi2 oxidation resistance via boron addition: Fabrication of MoB/MoSi2 composite by mechanical alloying and subsequent reactive sintering
P. R. Taleghani et al.
POWDER TECHNOLOGY (2014)
Spark plasma sintering synthesis of intermetallic T2 in the Mo-Si-B system
Laiqi Zhang et al.
ADVANCED POWDER TECHNOLOGY (2013)
Transient stage oxidation behavior of Mo76Si14B10 alloy at 1150°C
B. Roy et al.
CORROSION SCIENCE (2013)
Microstructure and oxidation resistance of Si-Mo-B coating for C/SiC coated carbon/carbon composites
Yu-Lei Zhang et al.
CORROSION SCIENCE (2013)
Fracture toughness and fracture mechanisms in Mo5SiB2 at ambient to elevated temperatures
Laiqi Zhang et al.
INTERMETALLICS (2013)
Effect of Yttrium Alloying on Intermediate to High-Temperature Oxidation Behavior of Mo-Si-B Alloys
S. Majumdar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
A Study on Effect of Reactive and Rare Earth Element Additions on the Oxidation Behavior of Mo-Si-B System
Sanjib Majumdar et al.
OXIDATION OF METALS (2013)
Effect of Ti (Macro-) Alloying on the High-Temperature Oxidation Behavior of Ternary Mo-Si-B Alloys at 820-1,300 A°C
Maria Azimovna Azim et al.
OXIDATION OF METALS (2013)
Mo-Si-B Alloys for Ultrahigh-Temperature Structural Applications
J. A. Lemberg et al.
ADVANCED MATERIALS (2012)
Microwave sintering of MoSi2-Mo5Si3 to promote a final nanometer-scale microstructure and suppressing of pesting phenomenon
J. Arreguin-Zavala et al.
MATERIALS CHARACTERIZATION (2012)
Oxidation behaviour of Mo-Si-B-(Al, Ce) ultrafine-eutectic dendrite composites in the temperature range of 500-700 degrees C
J. Das et al.
INTERMETALLICS (2011)
The oxidation behaviour of uniaxial hot pressed MoSi2 in air from 400 to 1400°C
S. Knittel et al.
INTERMETALLICS (2011)
Effect of Ce addition on the oxidation behaviour of Mo-Si-B-Al ultrafine composites at 1100 °C
J. Das et al.
SCRIPTA MATERIALIA (2011)
Superconductivity in Mo5SiB2
A. J. S. Machado et al.
SOLID STATE COMMUNICATIONS (2011)
Effects of Ti, Zr, and Hf on the phase stability of Mo_ss + Mo3Si + Mo5SiB2 alloys at 1600 degrees C
Ying Yang et al.
ACTA MATERIALIA (2010)
High temperature oxidation of Mo-Si-B alloys: Effect of low and very low oxygen partial pressures
Steffen Burk et al.
ACTA MATERIALIA (2010)
Oxidation behaviour of arc-melted and uniaxial hot pressed MoSi2 at 500 °C
S. Knittel et al.
INTERMETALLICS (2010)
Oxidation-resistant coatings for ultra-high-temperature refractory Mo-based alloys
J. H. Perepezko et al.
JOM (2010)
High-temperature oxidation of MoSi2
A. A. Sharif
JOURNAL OF MATERIALS SCIENCE (2010)
Effect of Zr Addition on the High-Temperature Oxidation Behaviour of Mo-Si-B Alloys
S. Burk et al.
OXIDATION OF METALS (2010)
Transient oxidation of Mo-Si-B alloys: Effect of the microstructure size scale
F. A. Rioult et al.
ACTA MATERIALIA (2009)
High temperature oxidation of mechanically alloyed Mo-Si-B alloys
S. Burk et al.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2009)
Oxidation performance of Mo3Si with Al additions
I. Rosales et al.
CORROSION SCIENCE (2009)
Metallic materials for structural applications beyond nickel-based superalloys
M. Heilmaier et al.
JOM (2009)
Nonisothermal and Cyclic Oxidation Behavior of Mo-Si-B and Mo-Si-B-Al Alloys
Sharma Paswan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
The Hotter the Engine, the Better
John H. Perepezko
SCIENCE (2009)
Phase stability and structural defects in high-temperature Mo-Si-B alloys
R. Sakidja et al.
ACTA MATERIALIA (2008)
Characterization and oxidation behavior of silicide coating on multiphase Mo-Si-B alloy
Zhihong Tang et al.
INTERMETALLICS (2008)
Spark plasma sintering and hot pressing of ZrB2-MoSi2 ultra-high-temperature ceramics
Andrea Balbo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Oxidation resistance coatings of Mo-Si-B alloys via a pack cementation process
J. S. Park et al.
METALS AND MATERIALS INTERNATIONAL (2008)
Molybdenum alloys for high temperature applications in air
P. Jehanno et al.
POWDER METALLURGY (2008)
Deposition and characterization of Al-Si metallic TBC precursor on Mo-Si-B turbine materials
J. E. Jackson et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)
Effect of reactive element oxide inclusions on the growth kinetics of protective oxide scales
T. J. Nijdam et al.
ACTA MATERIALIA (2007)
Oxidation behaviour of the Mo-Si-B and Mo-Si-B-Al alloys in the temperature range of 700-1300 °C
Sharma Paswan et al.
INTERMETALLICS (2007)
Microstructure and oxidation resistance of laser-remelted Mo-Si-B alloy
Fang Wang et al.
SCRIPTA MATERIALIA (2007)
Microstructure and mechanical behaviour of reaction hot pressed multiphase Mo-Si-B and Mo-Si-B-Al intermetallic alloys
R. Mitra et al.
INTERMETALLICS (2006)
Isothermal oxidation behaviour of Mo-Si-B and Mo-Si-B-Al alloys in the temperature range of 400-800°C
Sharma Paswan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Oxidation of stoichiometric poly- and single-crystalline MoSi2 at 773 K
F Zhang et al.
INTERMETALLICS (2006)
Modelling the influence of reactive elements on the work of adhesion between a thermally grown oxide and a bond coat alloy
IJ Bennett et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2006)
Mechanical behaviour and oxidation resistance of structural silicides
R Mitra
INTERNATIONAL MATERIALS REVIEWS (2006)
Microstructure and oxidation behavior of Nb-Mo-Si-B alloys
V Behrani et al.
INTERMETALLICS (2006)
Wet air and simulated combustion gas exposures of Mo-Si-B alloys
AJ Thom et al.
SCRIPTA MATERIALIA (2005)
Synthesis of oxidation resistant silicide coatings on Mo-Si-B alloys
R Sakidja et al.
SCRIPTA MATERIALIA (2005)
Optimizaton of Mo-Si-B intermetallic alloys
JH Schneibel et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Oxidation protective silicide coating on Mo-Si-B alloys
K Ito et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Oxidation behaviour of particle reinforced MoSi2 composites at temperatures up to 1700 °C Part 1:: Literature review
S Lohfeld et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2005)
ZrO2-SiO2 gradient multilayer oxidation protective coating for SiC coated carbon/carbon composites
HF Huang et al.
SURFACE & COATINGS TECHNOLOGY (2005)
The beneficial effect of water vapour on the oxidation at 600 and 700 degrees C of a MoSi2-based composite
K Hansson et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
Oxidation behavior of Mo-Si-B alloys in wet air
P Mandal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Oxidation mechanism of Mo5Si3 particle in Si3N4 matrix composite at 750 °C
T Iizuka et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Oxidation behavior of multiphase Mo-Si-B alloys
V Supatarawanich et al.
INTERMETALLICS (2004)
Microstructure of Nb substrates coated with Mo(Si,Al)2-Al2O3 composite and B-dopedMO5Si3 layers by spark plasma sintering
T Murakami et al.
INTERMETALLICS (2004)
Characterization of an industrially processed Mo-based silicide alloy
P Jéhanno et al.
INTERMETALLICS (2004)
Oxidation behaviour of a MoSi2-based composite in different atmospheres in the low temperature range (400-550 degrees C)
K Hansson et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)
Ultrahigh-temperature materials for jet engines
JC Zhao et al.
MRS BULLETIN (2003)
Mo-Si-B alloys: Developing a revolutionary turbine-engine material
DM Dimiduk et al.
MRS BULLETIN (2003)
High temperature strength of Mo-Mo3Si-Mo5SiB2 molybdenum silicides
JH Schneibel
INTERMETALLICS (2003)
Microstructure and oxidation resistance of a plasma sprayed Mo-Si-B multiphase alloy coating
N Nomura et al.
INTERMETALLICS (2003)
Effects of microstructure on the oxidation behavior of multiphase Mo-Si-B alloys
V Supatarawanich et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Influence of the addition of Cr and Al elements to the Mo3Si intermetallic alloy on the phase construction and the oxidation behavior
S Ochiai
THERMEC'2003, PTS 1-5 (2003)
Joining of oxidation-resistant Mo-Si-B multiphase alloy to heat-resistant Mo-ZrC in-situ composite
N Nomura et al.
INTERMETALLICS (2003)
Coating designs for oxidation control of Mo-Si-B alloys
JS Park et al.
SCRIPTA MATERIALIA (2002)
Oxidation behavior of Mo5SiB2-based alloy at elevated temperatures
K Yoshimi et al.
INTERMETALLICS (2002)
Oxidation mechanisms in Mo-reinforced Mo5SiB2(T2)-Mo3Si alloys
TA Parthasarathy et al.
ACTA MATERIALIA (2002)
A Mo-Si-B intermetallic alloy with a continuous α-Mo matrix
JH Schneibel et al.
SCRIPTA MATERIALIA (2002)
Oxidation behavior of alpha Mo-Mo3Si-Mo5SiB2 (T2) three phase system
MG Mendiratta et al.
INTERMETALLICS (2002)
Microstructural mechanical properties and yield point effects in Mo alloys
M Göken et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
MOSi2 laser cladding -: a comparison between two experimental procedures:: Mo-Si online combination and direct use of MOSi2
S Ignat et al.
OPTICS AND LASER TECHNOLOGY (2001)
Physical and mechanical properties of single crystals of the T2 phase in the Mo-Si-B system
K Ito et al.
INTERMETALLICS (2001)
Solid solution hardening and softening in MoSi2 alloys
AA Sharif et al.
SCRIPTA MATERIALIA (2001)
The crystal structure and thermal expansion of Mo5SiB2
CJ Rawn et al.
INTERMETALLICS (2001)
High temperature oxidation of silicon hexaboride ceramics
J Matsushita et al.
MATERIALS RESEARCH BULLETIN (2001)
Processing and mechanical properties of a molybdenum silicide with the composition Mo-12Si-8.5B (at.%)
JH Schneibel et al.
INTERMETALLICS (2001)
Deformation of a multiphase Mo-9.4Si-13.8B alloy at elevated temperatures
TG Nieh et al.
INTERMETALLICS (2001)
Stoichiometry and mechanical properties of Mo3Si
I Rosales et al.
INTERMETALLICS (2000)
Liquidus projection for the Mo-rich portion of the Mo-Si-B ternary system
CA Nunes et al.
INTERMETALLICS (2000)
Bubble growth in highly viscous silicate melts during continuous decompression from high pressure
JE Gardner et al.
GEOCHIMICA ET COSMOCHIMICA ACTA (2000)
High-temperature structural intermetallics
M Yamaguchi et al.
ACTA MATERIALIA (2000)
Oxidation behavior of molybdenum silicides and their composites
K Natesan et al.
INTERMETALLICS (2000)