Related references
Note: Only part of the references are listed.Prediction and Analysis of Abrasive Water Jet Machining Performance on Hybrid Composite
S. Vigneshwaran et al.
JOURNAL OF TESTING AND EVALUATION (2020)
Mechanical, morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites
B. Madhusudhan Reddy et al.
JOURNAL OF NATURAL FIBERS (2020)
Development and characterization of alkali treated abaca fiber reinforced friction composites
Yucheng Liu et al.
COMPOSITE INTERFACES (2019)
The post-impact response of flax/UP composite laminates under low velocity impact loading
H. N. Dhakal et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2019)
Dynamic mechanical properties of sugar palm/glass fiber reinforced thermoplastic polyurethane hybrid composites
A. Atiqah et al.
POLYMER COMPOSITES (2019)
Review on effect machining parameters on performance of natural fibre-reinforced composites (NFRCs)
T. Rajmohan et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)
Magnesium hydroxide reinforced kenaf fibers/epoxy hybrid composites Mechanical and thermomechanical properties
N. Saba et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Highly-aligned cellulose fibers reinforced epoxy composites derived from bulk natural bamboo
Ehsan Naderi Kalali et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
An experimental study on milling of natural fiber (jute)- reinforced polymer composites
Yahya H. Celik et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Solid particle erosion study on redmud - an industrial waste reinforced sisal/polyester hybrid composite
S. Vigneshwaran et al.
MATERIALS RESEARCH EXPRESS (2019)
Machinability of natural-fibre-reinforced polymer composites: Conventional vs ultrasonically-assisted machining
D. Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Thermomechanical and dynamic mechanical properties of bamboo/woven kenaf mat reinforced epoxy hybrid composites
Siew Sand Chee et al.
COMPOSITES PART B-ENGINEERING (2019)
Low velocity impact and compression after impact properties of hybrid biocomposites modified with multi-walled carbon nanotubes
K. I. Ismail et al.
COMPOSITES PART B-ENGINEERING (2019)
The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites
Jyun-Kai Huang et al.
COMPOSITES PART B-ENGINEERING (2019)
Production of epoxy composites reinforced by different natural fibers and their mechanical properties
Engin Sarikaya et al.
COMPOSITES PART B-ENGINEERING (2019)
Physico-mechanical and Taguchi-designed sliding wear properties of Himalayan agave fiber reinforced polyester composite
Sanjeeu Kumar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Experimental investigation on the response of unidirectional flax fiber composites to low-velocity impact with after-impact tensile and compressive strength measurement
Mohamed Habibi et al.
COMPOSITES PART B-ENGINEERING (2019)
Natural fiber reinforced non-asbestos brake friction composites: Influence of ramie fiber on physico-mechanical and tribological properties
Tej Singh et al.
MATERIALS RESEARCH EXPRESS (2019)
Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review
Yashas Gowda Thyavihalli Girijappa et al.
FRONTIERS IN MATERIALS (2019)
An experimental investigation on low-velocity impact response of novel jute/rubber flexible bio-composite
Vishwas Mahesh et al.
COMPOSITE STRUCTURES (2019)
Effect of fabrication parameters on strength of natural fiber polypropylene composites: Statistical assessment
Khalid I. Alzebdeh et al.
MEASUREMENT (2019)
Flexural, thermal and dynamic mechanical properties of date palm fibres reinforced epoxy composites
Mohamed Hamdy Gheith et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites
Tolera A. Negawo et al.
COMPOSITE STRUCTURES (2019)
Low velocity impact response of fabric reinforced hybrid composites with stratified filled epoxy matrix
M. Bunea et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Effect of interlayer carbon fiber dispersion on the low-velocity impact performance of woven flax-carbon hybrid composites
M. Ravandi et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Use of waste copper slag filled jute fiber reinforced composites for effective erosion prevenetion
G. Kalusuramana et al.
MEASUREMENT (2019)
Impact of BaSO4 filler on woven Aloevera/Hemp hybrid composite: Dynamic mechanical analysis
M. Arulmurugan et al.
MATERIALS RESEARCH EXPRESS (2019)
Recent progress on natural fiber hybrid composites for advanced applications: A review
M. J. Mochane et al.
EXPRESS POLYMER LETTERS (2019)
Dynamic mechanical and creep properties of poly(ether ketone)-graphite nanoplatelet (GNP) nanocomposites
S. D. Gaikwad et al.
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS (2019)
Effect of Chemical Treatment on Erosion Properties of Jute Polyester Composites
S. Vigneshwaran et al.
ADVANCES IN POLYMER COMPOSITES: MECHANICS, CHARACTERIZATION AND APPLICATIONS (2019)
Study of Solid Particle Erosion Wear Behavior of Bamboo Fiber Reinforced Polymer Composite with Cenosphere Filler
Hemalata Jena et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Mechanical, Dynamic Mechanical and Thermal Properties of Banana Fiber/Recycled High Density Polyethylene Biocomposites Filled with Flyash Cenospheres
Sukanya Satapathy et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Alfa fibers/clay hybrid composites based on polypropylene: Mechanical, thermal, and structural properties
Radouane Boujmal et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)
AWJ machinability performance of CS/UPR composites with the effect of chemical treatment
S. Kalirasu et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Effect of treated coir fiber/coconut shell powder and aramid fiber on mechanical properties of vinyl ester
P. A. Udaya Kumar et al.
POLYMER COMPOSITES (2018)
Tribological and mechanical performance of sisal-filled waste carbon and glass fibre hybrid composites
M. Aslan et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical and impact characterisation of flax and basalt fibre vinylester composites and their hybrids
Cristiano Fragassa et al.
COMPOSITES PART B-ENGINEERING (2018)
An Investigation on Wear and Dynamic Mechanical behavior of Jute/Hemp/Flax Reinforced Composites and Its Hybrids for Tribological Applications
Vijay Chaudhary et al.
FIBERS AND POLYMERS (2018)
Water-resistant hemp fiber-reinforced composites: In-situ surface protection by polyethylene film
Yingji Wu et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Characterization and properties of natural fiber polymer composites: A comprehensive review
M. R. Sanjay et al.
JOURNAL OF CLEANER PRODUCTION (2018)
The challenges of natural fiber in manufacturing, material selection, and technology application: A review
Tabrej Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)
Numerical and experimental assessment of water absorption of wood-polymer composites
Hatem Mrad et al.
MEASUREMENT (2018)
Mechanics of material removal when cutting natural fiber reinforced thermoplastic composites
Faissal Chegdani et al.
POLYMER TESTING (2018)
Mechanical, wear and thermal behaviour of hemp fibre/egg shell particle reinforced epoxy resin bio composite
J. Parivendhan Inbakumar et al.
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING (2018)
Facile Preparation and Characterization of Short-Fiber and Talc Reinforced Poly(Lactic Acid) Hybrid Composite with In Situ Reactive Compatibilizers
Phornwalan Nanthananon et al.
MATERIALS (2018)
Erosion performance studies on sansevieria cylindrica reinforced vinylester composite
R. Deepak Joel Johnson et al.
MATERIALS RESEARCH EXPRESS (2018)
Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses
Hom Nath Dhakal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Evaluation of machining performance of pineapple filler based reinforced polymer composites using abrasive water jet machining process
Jagadish et al.
CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI-2018) (2018)
Investigation on Mechanical and Tribological Behavior of Naturally Woven Coconut Sheath-Reinforced Polymer Composites (vol 33, pg 723, 2012)
Irullappasamy Siva et al.
POLYMER COMPOSITES (2017)
Machinability of natural fiber reinforced composites: a review
Mahmoud M. A. Nassar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Characterization of sisal/cotton fibre woven mat reinforced polymer hybrid composites
T. P. Sathishkumar et al.
JOURNAL OF INDUSTRIAL TEXTILES (2017)
Dependency of the Mechanical Properties of Sisal Fiber Reinforced Recycled Polypropylene Composites on Fiber Surface Treatment, Fiber Content and Nanoclay
Idowu D. Ibrahim et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)
Hole making in natural fiber-reinforced polylactic acid laminates: An experimental investigation
Pramendra Kumar Bajpai et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2017)
Parametric optimization studies on drilling of sandwich composites using the Box-Behnken design
R. Vinayagamoorthy
MATERIALS AND MANUFACTURING PROCESSES (2017)
Performance Evaluation of Abrasive Water Jet Machining on Banana Fiber Reinforced Polyester Composite
V. Arumuga Prabu et al.
JOURNAL OF NATURAL FIBERS (2017)
Dry sliding wear behavior of untreated and treated sugar palm fiber filled phenolic composites using factorial technique
B. Rashid et al.
WEAR (2017)
Studies on Mechanical and Morphological Characterization of Developed Jute/Hemp/Flax Reinforced Hybrid Composites for Structural Applications
Vijay Chaudhary et al.
Journal of Natural Fibers (2017)
Mechanical and impact characterization of hybrid composite laminates with carbon, basalt and flax fibres
E. Nisini et al.
COMPOSITES PART B-ENGINEERING (2017)
Salt-fog spray aging of jute-basalt reinforced hybrid structures: Flexural and low velocity impact response
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2017)
A Study on Impact Strength Characteristics of Coir Polyester Composites
Easwara G. L. Prasad et al.
PLASTICITY AND IMPACT MECHANICS (2017)
Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites
F. A. Almansour et al.
COMPOSITE STRUCTURES (2017)
Influence of moisture absorption on the impact properties of flax, basalt and hybrid flax/basalt fiber reinforced green composites
Irena Zivkovic et al.
COMPOSITES PART B-ENGINEERING (2017)
Effect of water absorption on the mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites
A. B. Maslinda et al.
COMPOSITE STRUCTURES (2017)
Mechanical properties of a polyurethane hybrid composite with natural lignocellulosic fibers
Guilherme Piovezan Otto et al.
COMPOSITES PART B-ENGINEERING (2017)
Hemp fiber reinforced polypropylene composites: The effects of material treatments
Theresa Sullins et al.
COMPOSITES PART B-ENGINEERING (2017)
Wear behavior of Palmyra palm leaf stalk fiber (PPLSF) reinforced polyester composites
D. Shanmugam et al.
COMPOSITE INTERFACES (2016)
Optimization of short Indian Areca fruit husk fiber (Areca catechu L.)-reinforced polymer composites for maximizing mechanical properties
J. S. Binoj et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)
Dynamic mechanical analysis and free vibration behavior of intra-ply woven natural fiber hybrid polymer composite
M. Rajesh et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Mechanical Properties of Hybrid Fibers-Reinforced Polymer Composite: A Review
M. K. Gupta et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2016)
Tension-Compression Fatigue Behavior of Plain Woven Kenaf/Kevlar Hybrid Composites
Suhad D. Salman et al.
BioResources (2016)
Thermal behaviour and dynamic mechanical analysis of Pennisetum purpureum/glass-reinforced epoxy hybrid composites
M. J. M. Ridzuan et al.
COMPOSITE STRUCTURES (2016)
Effects of water absorption on Napier grass fibre/polyester composites
M. Haameem J. A. et al.
COMPOSITE STRUCTURES (2016)
Mechanical properties of Napier grass fibre/polyester composites
M. J. A. Haameem et al.
COMPOSITE STRUCTURES (2016)
Hybridisation effect on diffusion kinetic and tensile mechanical behaviour of epoxy based flax-glass composites
El Hadi Saidane et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Damage tolerance of carbon/flax hybrid composites subjected to low velocity impact
Fabrizio Sarasini et al.
COMPOSITES PART B-ENGINEERING (2016)
Effect of oil palm nano filler on mechanical and morphological properties of kenaf reinforced epoxy composites
N. Saba et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Tensile, Flexual, Impact and Water Absorption Properties of Natural Fibre Reinforced Polyester Hybrid Composites
R. Prasanna Venkatesh et al.
FIBRES & TEXTILES IN EASTERN EUROPE (2016)
Tensile and flexural properties of polylactic acid-based hybrid green composites reinforced by kenaf, bamboo and coir fibers
Rosni Binti Yusoff et al.
INDUSTRIAL CROPS AND PRODUCTS (2016)
Experimental investigation on the mechanical properties of Cyperus pangorei fibers and jute fiber-based natural fiber composites
R. Vijay et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)
Physical and thermal properties of unidirectional banana-jute hybrid fiber-reinforced epoxy composites
Siva Bhaskara Rao Devireddy et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Flammability, thermal and dynamic mechanical properties of bamboo-glass hybrid composites
Nurul Zuhairah Mahmud Zuhudi et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2016)
Structural, mechanical and thermal properties of bio-based hybrid composites from waste coir residues: Fibers and shell particles
H. Essabir et al.
MECHANICS OF MATERIALS (2016)
Tribological characteristics comparison for oil palm fibre/epoxy and kenaf fibre/epoxy composites under dry sliding conditions
Fairuz Fazillah Shuhimi et al.
TRIBOLOGY INTERNATIONAL (2016)
Evaluation of Mechanical and Interfacial Properties of Sisal/Jute/Glass Hybrid Fiber Reinforced Polymer Composites
M. Ramesh et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)
Low velocity impact response of 3D angle-interlock Kevlar/basalt reinforced polypropylene composites
Aswani Kumar Bandaru et al.
MATERIALS & DESIGN (2016)
Layering pattern effects on vibrational behavior of coconut sheath/banana fiber hybrid composites
K. Senthil Kumar et al.
MATERIALS & DESIGN (2016)
Abrasive Water Jet Machining and Mechanical Behavior of Banyan Tree Saw Dust Powder Loaded Polypropylene Green Composites
Narayanappa Ramesha et al.
POLYMER COMPOSITES (2016)
Three-Body Abrasive Wear Behavior of Short Jute Fiber Reinforced Epoxy Composites
Vivek Mishra et al.
POLYMER COMPOSITES (2016)
A comparative analysis of woven jute/glass hybrid polymer composite with and without reinforcing of fly ash particles
G. Raghavendra et al.
POLYMER COMPOSITES (2016)
Synthesis, Chemical Resistance, and Water Absorption of Bamboo Fiber Reinforced Epoxy Composites
Anu Gupta
POLYMER COMPOSITES (2016)
Influence of CaCO3, Al2O3, and TiO2 microfillers on physico-mechanical properties of Luffa cylindrica/polyester composites
Vinay Kumar Patel et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2016)
Investigations on Drilling of Bidirectional Cotton Polyester Composite
Vijaykumar Chaudhary et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Free Vibration Characteristics of Banana/Sisal Natural Fibers Reinforced Hybrid Polymer Composite Beam
M. Rajesh et al.
INTERNATIONAL CONFERENCE ON VIBRATION PROBLEMS 2015 (2016)
Machinablity of Hybrid Natural Fiber Composite with and without Filler as Reinforcement
S. P. Jani et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Evaluation on mechanical properties of woven aloevera and sisal fibre hybrid reinforced epoxy composites
A. Shadrach Jeya Sekaran et al.
BULLETIN OF MATERIALS SCIENCE (2015)
Effect of temperature and hybridisation on the low velocity impact behavior of hemp-basalt/epoxy composites
C. Suresh Kumar et al.
COMPOSITE STRUCTURES (2015)
Evaluation of the damping of hybrid carbon-flax reinforced composites
Mustapha Assarar et al.
COMPOSITE STRUCTURES (2015)
The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2015)
Effects of alkali treatment and elevated temperature on the mechanical properties of bamboo fibre-polyester composites
Allan C. Manalo et al.
COMPOSITES PART B-ENGINEERING (2015)
Impact and post-impact damage characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
R. Petrucci et al.
COMPOSITES PART B-ENGINEERING (2015)
High toughness hybrid biocomposite process optimization
Hamideh Hajiha et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Influence of fly ash cenospheres on performance of coir fiber-reinforced recycled high-density polyethylene biocomposites
Sukanya Satapathy et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Mechanical and machining performance of glass and coconut sheath fibre polyester composites using AWJM
S. Kalirasu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Mechanical properties of hybrid glass/kenaf fibre-reinforced epoxy composite with matrix modification using liquid epoxidised natural rubber
Yusri H. Muhammad et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf-aramid hybrid laminated composites
R. Yahaya et al.
MATERIALS & DESIGN (2015)
Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation
A. Alavudeen et al.
MATERIALS & DESIGN (2015)
Experimental study of coated tools effects in dry cutting of natural fiber reinforced plastics
Faissal Chegdani et al.
SURFACE & COATINGS TECHNOLOGY (2015)
A review on tribological performance of natural fibre polymeric composites
Umar Nirmal et al.
TRIBOLOGY INTERNATIONAL (2015)
Wear resistance and friction behavior of thermoset matrix reinforced with Musaceae fiber bundles
Carlos Eduardo Correa et al.
TRIBOLOGY INTERNATIONAL (2015)
Tribological performance of polyester composites reinforced by agricultural wastes
R. A. Ibrahim
TRIBOLOGY INTERNATIONAL (2015)
Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics
F. Chegdani et al.
WEAR (2015)
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Layth Mohammed et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)
A Review of Natural Fiber Reinforced Poly(Vinyl Alcohol) Based Composites: Application and Opportunity
Boon Khoon Tan et al.
POLYMERS (2015)
Tamarind Fruit Fiber and Glass Fiber Reinforced Polyester Composites
G. Ramachandra Reddy et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2015)
BI-LAYER HYBRID BIOCOMPOSITES: CHEMICAL RESISTANT AND PHYSICAL PROPERTIES
Mohammad Jawaid et al.
BioResources (2014)
Tailoring the vibration damping behaviour of flax fibre-reinforced epoxy composite laminates via polyol additions
Marie-Joo Le Guen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications
A. Atiqah et al.
COMPOSITES PART B-ENGINEERING (2014)
Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications
Reza Mahjoub et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effects of the climatic conditions of the southeastern Brazil on degradation the fibers of coir-geotextile: Evaluation of mechanical and structural properties
Andrea Rodrigues Marques et al.
GEOTEXTILES AND GEOMEMBRANES (2014)
The Effect of Fiber Bleaching Treatment on the Properties of Poly(lactic acid)/Oil Palm Empty Fruit Bunch Fiber Composites
Marwah Rayung et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2014)
Effect of Oil Palm and Jute Fiber Treatment on Mechanical Performance of Epoxy Hybrid Composites
M. Jawaid et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2014)
Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry
Faris M. AL-Oqla et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Pineapple leaf/recycled disposable chopstick hybrid fiber-reinforced biodegradable composites
Yeng-Fong Shih et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
The Influence of Chemical Surface Modification of Kenaf Fiber using Hydrogen Peroxide on the Mechanical Properties of Biodegradable Kenaf Fiber/Poly(Lactic Acid) Composites
Nur Inani Abdul Razak et al.
MOLECULES (2014)
Progress Report on Natural Fiber Reinforced Composites
Omar Faruk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2014)
Influence of redmud on the mechanical, damping and chemical resistance properties of banana/polyester hybrid composites
V. Arumuga Prabu et al.
MATERIALS & DESIGN (2014)
Evaluation of mechanical properties of banana and sisal fiber reinforced epoxy composites: Influence of glass fiber hybridization
V. P. Arthanarieswaran et al.
MATERIALS & DESIGN (2014)
Quasi-static penetration and ballistic properties of kenaf-aramid hybrid composites
R. Yahaya et al.
MATERIALS & DESIGN (2014)
Hot compaction and mechanical properties of ramie fabric/epoxy composite fabricated using vacuum assisted resin infusion molding
Yizhuo Gu et al.
MATERIALS & DESIGN (2014)
Determination of mechanical properties of intra-layer abaca-jute-glass fiber reinforced composite
B. Vijaya Ramnath et al.
MATERIALS & DESIGN (2014)
Synergy of fiber length and content on free vibration and damping behavior of natural fiber reinforced polyester composite beams
K. Senthil Kumar et al.
MATERIALS & DESIGN (2014)
Drilling Characteristics of Sisal Fiber-Reinforced Epoxy and Polypropylene Composites
Kishore Debnath et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Effect of coir fiber loading on mechanical and morphological properties of oil palm fibers reinforced polypropylene composites
E. S. Zainudin et al.
POLYMER COMPOSITES (2014)
Biodegradability of Nonwoven Flax Fiber Reinforced Polylactic Acid Biocomposites
Shah Alimuzzaman et al.
POLYMER COMPOSITES (2014)
Biodegradability of crude glycerol-based polyurethane foams during composting, anaerobic digestion and soil incubation
Eddie F. Gomez et al.
POLYMER DEGRADATION AND STABILITY (2014)
Effect of organically modified montmorillonite clay on wear behavior of naturally woven coconut sheath/polyester composite
N. Rajini et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2014)
Machining of non-homogeneous composite material with natural fibers reinforcement and HDPE matrix
Zuzana Hutyrova et al.
PRECISION MACHINING VII (2014)
Effect of fiber loading on abrasive wear behaviour of Ipomoea carnea reinforced epoxy composite
Kamal Kumar Basumatary et al.
INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY (2014)
Development of flax/carbon fibre hybrid composites for enhanced properties
H. N. Dhakal et al.
CARBOHYDRATE POLYMERS (2013)
A comparative study on chemical treatment of jute fiber: potassium dichromate, potassium permanganate and sodium perborate trihydrate
Yasemin Bulut et al.
CELLULOSE (2013)
Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites
M. Jawaid et al.
COMPOSITES PART B-ENGINEERING (2013)
Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites
M. Boopalan et al.
COMPOSITES PART B-ENGINEERING (2013)
Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
Yongli Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Mechanical properties of randomly oriented snake grass fiber with banana and coir fiber-reinforced hybrid composites
T. P. Sathishkumar et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
Hole quality evaluation of natural fiber composite using image analysis technique
N. Venkateshwaran et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf Stalk Fiber/jute fiber reinforced hybrid polyester composites
D. Shanmugam et al.
MATERIALS & DESIGN (2013)
Jute fibers and powderized hazelnut shells as natural fillers in non-asbestos organic non-metallic friction composites
Vlastimil Matejka et al.
MATERIALS & DESIGN (2013)
Pine cone fiber/clay hybrid composite: Mechanical and thermal properties
F. Z. Arrakhiz et al.
MATERIALS & DESIGN (2013)
Biodegradability of conventional and bio-based plastics and natural fiber composites during composting, anaerobic digestion and long-term soil incubation
Eddie F. Gomez et al.
POLYMER DEGRADATION AND STABILITY (2013)
Effects of wood fiber esterification on properties, weatherability and biodurability of wood plastic composites
Liqing Wei et al.
POLYMER DEGRADATION AND STABILITY (2013)
Thermogravimetric Stability Behavior of Less Common Lignocellulosic Fibers - a Review
Sergio Neves Monteiro et al.
Journal of Materials Research and Technology-JMR&T (2013)
Flexural properties of hemp fibre reinforced polylactide and unsaturated polyester composites
Moyeenuddin A. Sawpan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
The effects of alkali-silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene composites
O. M. L. Asumani et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
M. M. Kabir et al.
COMPOSITES PART B-ENGINEERING (2012)
Prediction of tensile properties of hybrid-natural fiber composites
N. Venkateshwaran et al.
COMPOSITES PART B-ENGINEERING (2012)
Tensile and flexural properties of snake grass natural fiber reinforced isophthallic polyester composites
T. P. Sathishkumar et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Effect of hybridization and compatibilization on the mechanical properties of recycled polypropylene-hemp composites
Adel Ramezani Kakroodi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Characterization of epoxy hybrid composites filled with cellulose fibers and nano-SiC
H. Alamri et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Preparation and characterization of chemically modified Jute-Coir hybrid fiber reinforced epoxy novolac composites
Sudhir Kumar Saw et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Development of eco-friendly brake friction composites containing flax fibers
Zhezhen Fu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Mechanical and free vibration properties of montmorillonite clay dispersed with naturally woven coconut sheath composite
N. Rajini et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Effect of alkali treatment on vibration characteristics and mechanical properties of natural fabric reinforced composites
Libo Yan
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment
Libo Yan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites
Y. A. El-Shekeil et al.
MATERIALS & DESIGN (2012)
Flexural properties of treated and untreated kenaf/epoxy composites
B. F. Yousif et al.
MATERIALS & DESIGN (2012)
Materials prepared from biopolyethylene and curaua fibers: Composites from biomass
D. O. Castro et al.
POLYMER TESTING (2012)
Effect of water absorption on the mechanical properties of n-SiC filled recycled cellulose fibre reinforced epoxy eco-nanocomposites
H. Alamri et al.
POLYMER TESTING (2012)
Biocomposites reinforced with natural fibers: 2000-2010
Omar Faruk et al.
PROGRESS IN POLYMER SCIENCE (2012)
Adhesive wear and frictional performance of bamboo fibres reinforced epoxy composite
Umar Nirmal et al.
TRIBOLOGY INTERNATIONAL (2012)
Development of Environment Friendly Hybrid Layered Sisal-Glass-Epoxy Composites
S. A. R. Hashmi et al.
COMPOSITE INTERFACES (2011)
Water barrier properties of nanoclay filled sisal fibre reinforced epoxy composites
T. P. Mohan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Effect of surface microfibrillation of sisal fibre on the mechanical properties of sisal/aramid fibre hybrid composites
Lin Xin Zhong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
A review on the tensile properties of natural fiber reinforced polymer composites
H. Ku et al.
COMPOSITES PART B-ENGINEERING (2011)
Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly(butylene succinate) biodegradable composites
Tran Huu Nam et al.
COMPOSITES PART B-ENGINEERING (2011)
Effect of Fiber Length on Mechanical Behavior of Coir Fiber Reinforced Epoxy Composites
Sandhyarani Biswas et al.
FIBERS AND POLYMERS (2011)
Regression modeling and optimization of machinability behavior of glass-coir-polyester hybrid composite using factorial design methodology
S. Jayabal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Bamboo Fiber Reinforced Polypropylene Composites and Their Mechanical, Thermal, and Morphological Properties
Sanjay K. Chattopadhyay et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Biodegradability Studies on Natural Fibers Reinforced Polypropylene Composites
Sanjay K. Chattopadhyay et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Viscoelastic interpretations of erosion performance of short aramid fibre reinforced vinyl ester resin composites
Sandeep Kumar et al.
JOURNAL OF MATERIALS SCIENCE (2011)
The mechanical properties, deformation and thermomechanical properties of alkali treated and untreated Agave continuous fibre reinforced epoxy composites
K. Mylsamy et al.
MATERIALS & DESIGN (2011)
Chemical resistance, void content and tensile properties of oil palm/jute fibre reinforced polymer hybrid composites
M. Jawaid et al.
MATERIALS & DESIGN (2011)
Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites
N. Venkateshwaran et al.
MATERIALS & DESIGN (2011)
Influence of fiber surface treatment and length on physico-chemical properties of short random banana fiber-reinforced castor oil polyurethane composites
Claudia Merlini et al.
POLYMER TESTING (2011)
Adhesive wear of thermoplastic composite based on kenaf fibres
S. Narish et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2011)
Tribological Characteristics of Sustainable Fiber-Reinforced Thermoplastic Composites under Wet Adhesive Wear
Narish Singh et al.
TRIBOLOGY TRANSACTIONS (2011)
Effect of Benzoylation and Graft Copolymerization on Morphology, Thermal Stability, and Crystallinity of Sisal Fibers
Susheel Kalia et al.
JOURNAL OF NATURAL FIBERS (2011)
Effect of Different Parameters on Mechanical and Erosion Wear Behavior of Bamboo Fiber Reinforced Epoxy Composites
Anu Gupta et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2011)
Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites
M. S. Islam et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Polypropylene composites with enzyme modified abaca fibre
Andrzej K. Bledzki et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Characterization of Plant and Animal Based Natural Fibers Reinforced Polypropylene Composites and Their Comparative Study
Quazi T. H. Shubhra et al.
FIBERS AND POLYMERS (2010)
Frictional Coefficient, Hardness, Impact Strength, and Chemical Resistance of Reinforced Sisal-Glass Fiber Epoxy Hybrid Composites
M. Ashok Kumar et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
Sisal/Carbon Fibre Reinforced Hybrid Composites: Tensile, Flexural and Chemical Resistance Properties
P. Noorunnisa Khanam et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)
Chemical Resistance Studies of Silk/Sisal Fiber-Reinforced Unsaturated Polyester-Based Hybrid Composites
K. Raghu et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Relationship between fiber chemical treatment and properties of recycled pp/bamboo fiber composites
Nguyen Tri Phuong et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
Chemical Resistance and Tensile Properties of Glass and Bamboo Fibers Reinforced Polyester Hybrid Composites
E. Venkata Subba Reddy et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
A comparative study on erosion characteristics of red mud filled bamboo-epoxy and glass-epoxy composites
Sandhyarani Biswas et al.
MATERIALS & DESIGN (2010)
Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers
Igor Maria De Rosa et al.
MATERIALS & DESIGN (2010)
Mechanical property improvement of unsaturated polyester composite reinforced with admicellar-treated sisal fibers
Supranee Sangthong et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Mechanical properties of polypropylene composites reinforced with chemically treated abaca
Md. Rezaur Rahman et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Characterization of treated date palm tree fiber as composite reinforcement
Ahmad Alawar et al.
COMPOSITES PART B-ENGINEERING (2009)
Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites
Hazizan Md Akil et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Fabrication of long and discontinuous natural fiber reinforced polypropylene biocomposites and their mechanical properties
Byoung-Ho Lee et al.
FIBERS AND POLYMERS (2009)
Synthesis and Characterizations of Silane Treated Grewia optiva Fibers
Amar Singh Singha et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2009)
Influence of MA-g-PP on abrasive wear behaviour of chopped sisal fibre reinforced polypropylene composites
U. K. Dwivedi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A Study on Hardness and Flexural Properties of Kapok/Sisal Composites
G. Venkata Reddy et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Mechanical property evaluation of natural fiber coir composite
S. Harish et al.
MATERIALS CHARACTERIZATION (2009)
Pretreatments of Natural Fibers and their Application as Reinforcing Material in Polymer Composites-A Review
Susheel Kalia et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Solid Particle Erosion of Lantana Camara Fiber-Reinforced Polymer Matrix Composite
Chittaranjan Deo et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2009)
The Influence of Alkaline Surface Fibre Treatment on the Impact Properties of Sugar Palm Fibre-Reinforced Epoxy Composites
D. Bachtiar et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2009)
Banana/Glass Fiber-Reinforced Polypropylene Hybrid Composites: Fabrication and Performance Evaluation
Sushanta K. Samal et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2009)
Frictional and wear performance of polyester composites based on coir fibres
B. F. Yousif
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2009)
Potential of kenaf fibres as reinforcement for tribological applications
C. W. Chin et al.
WEAR (2009)
Surface behavior and film formation analysis of sisal fiber coated by poly(methyl methacrylate) ultrathin film
Thirawudh Pongprayoon et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2008)
Improvement of physico-mechanical properties of jute fiber reinforced polypropylene composites by post-treatment
Md. Rezaur Rahman et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Effect of fiber loading and chemical treatments on thermophysical properties of banana fiber/polypropylene commingled composite materials
Sherely Annie Paul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Characterization of natural fiber surfaces and natural fiber composites
N. Sgriccia et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Abrasive wear performance of untreated SCF reinforced polymer composite
N. S. M. El-Tayeb
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Parametric optimization erosion wear of polyester-GF-alumina hybrid composites using the Taguchi method
Amar Patnaik et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2008)
Development of HEMP fiber reinforced polypropylene composites
Hajnalka Hargitai et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2008)
Mechanical properties of kenaf fibers and kenaf/PLA composites
Shinji Ochi
MECHANICS OF MATERIALS (2008)
Mechanical properties of polypropylene/natural fiber composites: Comparison of wood fiber and cotton fiber
Sam-Jung Kim et al.
POLYMER TESTING (2008)
High-stress three-body abrasive wear of treated and untreated oil palm fibre-reinforced polyester composites
B. F. Yousif et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2008)
Chemical resistance, void contents, and morphological properties of Hildegardia fabric/polycarb onate-toughened epoxy composites
B. R. Guduri et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites
H. N. Dhakal et al.
COMPOSITE STRUCTURES (2007)
Studies on the water absorption properties of short hemp-glass fiber hybrid polypropylene composites
Suhara Panthapulakkal et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Fabrication and mechanical properties of completely biodegradable hemp fiber reinforced polylactic acid composites
Ruihua Hu et al.
JOURNAL OF COMPOSITE MATERIALS (2007)
Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites
H. N. Dhakal et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Graphite modified cotton fibre reinforced polyester composites under sliding wear conditions
S. A. R. Hashmi et al.
WEAR (2007)
Effect of silane coupling agents on the properties of pine fibers/polypropylene composites
Jordi Girones et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
A comparative study on mechanical properties of sisal-leaf fibre-reinforced polyester composites prepared by resin transfer and compression moulding techniques
P. A. Sreekumar et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Study of structural morphology of hemp fiber from the micro to the nanoscale
Bei Wang et al.
APPLIED COMPOSITE MATERIALS (2007)
Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites - Mechanical, water absorption and thermal properties
Suhara Panthapulakkal et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Weathering behavior of fly-ash jute polymer composite
S. K. Acharya et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review
Xue Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)
Pre-treatment of flax fibers for use in rotationally molded biocomposites
B. Wang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Tensile properties of sun hemp, banana and sisal fiber reinforced polyester composites
C. Udaya Kiran et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Chemical resistance of sisal/glass reinforced unsaturated polyester hybrid composites
K. John et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2007)
Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions
M. Zampaloni et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Effect of coupling agent on abrasive wear behaviour of chopped jute fibre-reinforced polypropylene composites
Navin Chand et al.
WEAR (2006)
The influence of impactor shape on the damage to composite laminates
T. Mitrevski et al.
COMPOSITE STRUCTURES (2006)
Fungal-modification of natural fibers: A novel method of treating natural fibers for composite reinforcement
Deepaksh Gulati et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2006)
Role of pretreatment with potassium permanganate and urea on mechanical and degradable properties of photocured coir (Cocos nucifera) fiber with 1,6-hexanediol diacrylate
MA Khan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Mechanical properties of pineapple leaf fibre reinforced polypropylene composites
RMN Arib et al.
MATERIALS & DESIGN (2006)
Tensile properties of Arenga pinnata fiber-reinforced epoxy composites
HY Sastra et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2006)
Degradability of composites, prepared from ethylene-propylene copolymer and jute fiber under accelerated aging and biotic environments
AP Kumar et al.
MATERIALS CHEMISTRY AND PHYSICS (2005)
Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites
M Idicula et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Effect of treatment of maleic anhydride on mechanical properties of natural fiber: Polystyrene composites
S Mishra et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2005)
Lignocellulose-based hybrid bilayer laminate composite: Part I - Studies on tensile and impact behavior of oil palm fiber-glass fiber-reinforced epoxy resin
ABA Hariharan et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Impact damage of carbon fiber polymer-matrix composites, studied by electrical resistance measurement
SK Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization
A Arbelaiz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Deformation mechanisms and mechanical properties of modified polypropylene/wood fiber composites
VN Hristov et al.
POLYMER COMPOSITES (2004)
Load-bearing natural fiber composite cellular beams and panels
R Burgueno et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Ecofriendly Behavior of host matrix in composites prepared from agro-waste and polypropylene
JK Pandey et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
High stiffness natural fiber-reinforced hybrid polypropylene composites
HJ Li et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2003)
The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres
MS Sreekala et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres
S Joseph et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2002)
Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics
T Corbière-Nicollier et al.
RESOURCES CONSERVATION AND RECYCLING (2001)
A review on interface modification and characterization of natural fiber reinforced plastic composites
J George et al.
POLYMER ENGINEERING AND SCIENCE (2001)
The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites
MZ Rong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Influence of moisture content on the vibrational properties of hematoxylin-impregnated wood
E Obataya et al.
JOURNAL OF WOOD SCIENCE (2001)
Oil palm fibre reinforced phenol formaldehyde composites: Influence of fibre surface modifications on the mechanical performance
MS Sreekala et al.
APPLIED COMPOSITE MATERIALS (2000)