Related references
Note: Only part of the references are listed.Effects of a phosphorous-containing Pd layer in a thin-ENEPIG surface finish on the interfacial reactions and mechanical strength of a Sn-58Bi solder joint
Jungsoo Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Optimal Ni(P) thickness and reliability evaluation of thin-Au/Pd(P)/Ni(P) surface-finish with Sn-3.0Ag-0.5Cu solder joints
Jungsoo Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Comparative study of ENEPIG and thin ENEPIG as surface finishes for SAC305 solder joints
Jeong-Won Yoon et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)
Interfacial Reaction Between Sn3.0Ag0.5Cu Solder and ENEPIG for Fine Pitch BGA by Stencil Printing
Ziyu Liu et al.
JOURNAL OF ELECTRONIC MATERIALS (2014)
Effect of Isothermal Aging on the Long-Term Reliability of Fine-Pitch Sn-Ag-Cu and Sn-Ag Solder Interconnects With and Without Board-Side Ni Surface Finish
Tae-Kyu Lee et al.
JOURNAL OF ELECTRONIC MATERIALS (2014)
Optimal Ni(P) thickness design in ultrathin-ENEPIG metallization for soldering application concerning electrical impedance and mechanical bonding strength
Cheng-Ying Ho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of Ni-coated Carbon Nanotubes addition on the electromigration of Sn-Ag-Cu solder joints
Zhongbao Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Microstructural variation and high-speed impact responses of Sn-3.0Ag-0.5Cu/ENEPIG solder joints with ultra-thin Ni-P deposit
Cheng-Ying Ho et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Effects of Pd(P) Thickness on the Microstructural Evolution Between Sn-3Ag-0.5Cu and Ni(P)/Pd(P)/Au Surface Finish During the Reflow Process
Bo-Mook Chung et al.
JOURNAL OF ELECTRONIC MATERIALS (2012)
Electromigration Failure Mechanism in Sn-Cu Solder Alloys with OSP Cu Surface Finish
Ming-Hui Chu et al.
JOURNAL OF ELECTRONIC MATERIALS (2012)
Effect of Pd Thickness on the Interfacial Reaction and Shear Strength in Solder Joints Between Sn-3.0Ag-0.5Cu Solder and Electroless Nickel/Electroless Palladium/Immersion Gold (ENEPIG) Surface Finish
Young Min Kim et al.
JOURNAL OF ELECTRONIC MATERIALS (2012)
Effect of electromigration induced joule heating and strain on microstructural recrystallization in eutectic SnPb flip chip solder joints
Fan-Yi Ouyang et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Microstructure, kinetic analysis and hardness of Sn-Ag-Cu-1 wt% nano-ZrO2 composite solder on OSP-Cu pads
Asit Kumar Gain et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Comparative Study of ENIG and ENEPIG as Surface Finishes for a Sn-Ag-Cu Solder Joint
Jeong-Won Yoon et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Effects of Co additions on electromigration behaviors in Sn-3.0 Ag-0.5 Cu-based solder joint
Limin Ma et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Influence of Palladium Thickness on the Soldering Reactions Between Sn-3Ag-0.5Cu and Au/Pd(P)/Ni(P) Surface Finish
W. H. Wu et al.
JOURNAL OF ELECTRONIC MATERIALS (2010)
Failure mechanisms of solder interconnects under current stressing in advanced electronic packages
Y. C. Chan et al.
PROGRESS IN MATERIALS SCIENCE (2010)
Electromigration Behavior in Sn-37Pb and Sn-3.0Ag-0.5Cu Flip-Chip Solder Joints under High Current Density
Sang-Su Ha et al.
JOURNAL OF ELECTRONIC MATERIALS (2009)
An Investigation of Microstructure and Microhardness of Sn-Cu and Sn-Ag Solders as Functions of Alloy Composition and Cooling Rate
Sun-Kyoung Seo et al.
JOURNAL OF ELECTRONIC MATERIALS (2009)
A review of mechanical properties of lead-free solders for electronic packaging
Hongtao Ma et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Solder joint reliability in flip chip package with surface treatment of ENIG under thermal shock test
Sang-Su Ha et al.
METALS AND MATERIALS INTERNATIONAL (2009)
Intermetallic reactions in Sn-0.4Co-0.7Cu solder BGA packages with an ENIG surface finish
T. H. Chuang et al.
JOURNAL OF ELECTRONIC MATERIALS (2008)
Electromigration in line-type Cu/Sn-Bi/Cu solder joints
X. Gu et al.
JOURNAL OF ELECTRONIC MATERIALS (2008)
Impact of the ROHS directive on high-performance electronic systems - Part I: need for lead utilization in exempt systems
Karl J. Puttlitz et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2007)
Electromigration issues in lead-free solder joints
Chih Chen et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2007)
Electromigration effect on intermetallic growth and Young's modulus in SAC solder joint
Luhua Xu et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Effect of Ni-P thickness on the tensile strength of Cu/electroless Ni-P/Sn-3.5Ag solder joint
Aditya Kumar et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2006)
Electromigration-induced UBM consumption and the resulting failure mechanisms in flip-chip solder joints
Y. L. Lin et al.
JOURNAL OF ELECTRONIC MATERIALS (2006)
Effect of electromigration on interfacial reactions between electroless Ni-P and Sn-3.5% Ag solder
A Kumar et al.
THIN SOLID FILMS (2004)
Six cases of reliability study of Pb-free solder joints in electronic packaging technology
K Zeng et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2002)
Solder joint reliability and characteristics of deformation and crack growth of Sn-Ag-Cu versus eutectic Sn-Pb on a WLP in a thermal cycling test
DH Kim et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2002)
Current-crowding-induced electromigration failure in flip chip solder joints
ECC Yeh et al.
APPLIED PHYSICS LETTERS (2002)