Related references
Note: Only part of the references are listed.Nonadditive strengthening functions for cold-worked cubic metals: Experiments and constitutive modeling
Fulin Jiang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Perspective on hetero-deformation induced (HDI) hardening and back stress
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2019)
Back-stress-induced strengthening and strain hardening in dual-phase steel
X. L. Liu et al.
MATERIALIA (2019)
Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method
Z. C. Sun et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Modeling the anisotropy of hot plastic deformation of two-phase titanium alloys with a colony microstructure
X. G. Fan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
A novel constitutive model for multi-step stress relaxation ageing of a pre-strained 7xxx series alloy
Jing-Hua Zheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Load partition and microstructural evolution during hot deformation of Ti-6Al-6V-2Sn matrix composites, and possible strengthening mechanisms
David Canelo-Yubero et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
An Analysis on the Constitutive Models for Forging of Ti6Al4V Alloy Considering the Softening Behavior
Paul M. Souza et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Microstructure Evolution in a 6082 Aluminium Alloy during Thermomechanical Treatment
Cecilia Poletti et al.
MATERIALS (2018)
Mesoscale cyclic crystal plasticity with dislocation substructures
Gustavo M. Castelluccio et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper
Guowei Zhou et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Modeling and simulation framework for dynamic strain localization in elasto-viscoplastic metallic materials subject to large deformations
H. M. Mourad et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Simulation of plastic deformation in Ti-5553 alloy using a self-consistent viscoplastic model
Sudipto Mandal et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Interaction effect between alpha and beta phases based on dynamic recrystallization of isothermally compressed Ti-5Al-2Sn-2Zr-4Mo-4Cr with basketweave microstructure
J. Z. Sun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
A physically-based constitutive model for hot deformation of Ti-10-2-3 alloy
Ravindranadh Bobbili et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Forging property, processing map, and mesoscale microstructural evolution modeling of a Ti-17 alloy with a lamellar (α plus β) starting microstructure
Hiroaki Matsumoto et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
A novel unified dislocation density-based model for hot deformation behavior of a nickel-based superalloy under dynamic recrystallization conditions
Y. C. Lin et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
The α-factor in the Taylor flow-stress law in monotonic, cyclic and quasi-stationary deformations: Dependence on slip mode, dislocation arrangement and density
Hael Mughrabi
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2016)
A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys
Hongwei Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Hashin-Shtrikman type mean field model for the two-scale simulation of the thermomechanical processing of steel
Rudolf Neumann et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Uniaxial mean stress relaxation of 9-12% Cr steel at high temperature: Experiments and viscoplastic constitutive modeling
De-Long Wu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Constitutive model for nickel alloy 690 (Inconel 690) at various strain rates and temperatures
Jerome Blaizot et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Crystal plasticity FE modeling of Ti alloys for a range of strain-rates. Part I: A unified constitutive model and flow rule
Ahmad Shahba et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Unified description of the softening behavior of beta-metastable and alpha plus beta titanium alloys during hot deformation
Cecilia Poletti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Load partition and microstructural evolution during in situ hot deformation of Ti-6Al-6V-2Sn alloys
David Canelo-Yubero et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructural Analysis of Orientation-Dependent Recovery and Recrystallization in a Modified 9Cr-1Mo Steel Deformed by Compression at a High Strain Rate
Zhenbo Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Deformation behavior of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with two initial microstructures during hot working
Jiao Luo et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
The flow behavior and microstructure evolution during (α plus β) deformation of β wrought TA15 titanium alloy
A. M. Zhao et al.
MATERIALS & DESIGN (2016)
Physically-based constitutive modelling of hot deformation behavior in a LDX 2101 duplex stainless steel
Nima Haghdadi et al.
MATERIALS & DESIGN (2016)
A physically-based constitutive model for a nitrogen alloyed ultralow carbon stainless steel
An He et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
A physically-based constitutive model for high temperature deformation of Cu-0.36Cr-0.03Zr alloy
Guoliang Ji et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Dynamic softening behavior of TC18 titanium alloy during hot deformation
Y. Q. Ning et al.
MATERIALS & DESIGN (2015)
Constitutive analysis of hot deformation behavior of a Ti6Al4V alloy using physical based model
Paul M. Souza et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Predicting the effects of microstructural features on strain localization of a two-phase titanium alloy
Zhe Ji et al.
MATERIALS & DESIGN (2015)
The identification of dynamic recrystallization and constitutive modeling during hot deformation of Ti55511 titanium alloy
Kai Tan et al.
MATERIALS & DESIGN (2015)
Boundary migration during recrystallization: experimental observations
Y. B. Zhang et al.
36TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE (2015)
A physically-based constitutive model for a typical nickel-based superalloy
Y. C. Lin et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Flow characteristics and constitutive modeling for elevated temperature deformation of a high Nb containing TiAl alloy
Liang Cheng et al.
INTERMETALLICS (2014)
Multiscale modeling of hot-working with dynamic recrystallization by coupling microstructure evolution and macroscopic mechanical behavior
Tomohiro Takaki et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Unified modeling of flow softening and globularization for hot working of two-phase titanium alloy with a lamellar colony microstructure
Pengfei Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Dynamic recrystallization behavior of Ti-5Al-5Mo-5V-1Cr-1Fe alloy
Houquan Liang et al.
MATERIALS & DESIGN (2014)
A physical-based constitutive relation to predict flow stress for Cu-0.4Mg alloy during hot working
Guoliang Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Study on the dynamic recrystallization behavior of Ti-alloy Ti-10V-2Fe-3V in β processing via experiment and simulation
D. L. OuYang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Direct Observation of Grain Boundary Migration during Recrystallization within the Bulk of a Moderately Deformed Aluminium Single Crystal
Steven Van Boxel et al.
MATERIALS TRANSACTIONS (2014)
Modeling of discontinuous dynamic recrystallization of a near-α titanium alloy IMI834 during isothermal hot compression by combining a cellular automaton model with a crystal plasticity finite element method
Chuan Wu et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V
Bijish Babu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing
Hongwei Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Modeling and simulation on ultrafine-graining based on multiscale crystal plasticity considering dislocation patterning
Y. Aoyagi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Flow softening, twinning and dynamic recrystallization in AZ31 magnesium
X. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Statistic derivation of Taylor factors for polycrystalline metals with application to pure magnesium
J. H. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Deformation induced anisotropic responses of Ti-6Al-4V alloy Part II: A strain rate and temperature dependent anisotropic yield criterion
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Constitutive modelling of plasticity of fcc metals under extremely high strain rates
C. Y. Gao et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V
Bo Song et al.
MATERIALS & DESIGN (2012)
Dynamic restoration and microstructural evolution during hot deformation of a P/M Al6063 alloy
H. Asgharzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Particle strengthening in fcc crystals with prolate and oblate precipitates
Bernhard Sonderegger et al.
SCRIPTA MATERIALIA (2012)
Internal-state-variable based self-consistent constitutive modeling for hot working of two-phase titanium alloys coupling microstructure evolution
X. G. Fan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
An alternative to kinematic hardening in classical plasticity
Frederic Barlat et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
An investigation into the hot deformation characteristics of 7075 aluminum alloy
M. R. Rokni et al.
MATERIALS & DESIGN (2011)
A new constitutive model for HCP metals
C. Y. Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Simulation of discontinuous dynamic recrystallization in pure Cu using a probabilistic cellular automaton
Hakan Hallberg et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
Constitutive model for high temperature deformation of titanium alloys using internal state variables
Jiao Luo et al.
MECHANICS OF MATERIALS (2010)
Microstructure evolution of Al-Zn-Mg-Cu-Zr alloy during hot deformation
Yan Liangming et al.
RARE METALS (2010)
The generalized Mackenzie distribution: Disorientation angle distributions for arbitrary textures
J. K. Mason et al.
ACTA MATERIALIA (2009)
The Flow Behavior and Microstructural Evolution of Ti-5Al-5Mo-5V-3Cr during Subtransus Isothermal Forging
N. G. Jones et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Thermomechanical processing of Ti-5A1-5Mo-5V-3Cr
N. G. Jones et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: Experiments and modeling over a wide range of strain-rates and temperatures
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Simple flow rules for modeling the behavior of inhomogeneous viscoplastic materials
F Montheillet et al.
ADVANCED ENGINEERING MATERIALS (2005)
Microstructural based models for bcc and fcc metals with temperature and strain rate dependency
GZ Voyiadjis et al.
MECHANICS OF MATERIALS (2005)
A study of microstructural length scale effects on the behaviour of FCC polycrystals using strain gradient concepts
KS Cheong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals
A Arsenlis et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2004)
A model of continuous dynamic recrystallization
S Gourdet et al.
ACTA MATERIALIA (2003)
Mechanical behavior of Ti-6Al-4V at high and moderate temperatures - Part II: constitutive modeling
RC Picu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
The adiabatic correction factor for deformation heating during the uniaxial compression test
RL Goetz et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2001)
The effect of alpha platelet thickness on plastic flow during hot working of Ti-6Al-4V with a transformed microstructure
SL Semiatin et al.
ACTA MATERIALIA (2001)
Different levels of plastic strain incompatibility during cyclic loading: in terms of dislocation density and distribution
X Feaugas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)