Related references
Note: Only part of the references are listed.Preparation and In vitro Evaluation of FDM 3D-Printed Ellipsoid-Shaped Gastric Floating Tablets with Low Infill Percentages
Di Chen et al.
AAPS PHARMSCITECH (2020)
Fabrication of an osmotic 3D printed solid dosage form for controlled release of active pharmaceutical ingredients
Christos Gioumouxouzis et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Speed it up, slow it down...An issue of bicalutamide release from 3D printed tablets
Witold Jamroz et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)
Systematic screening of pharmaceutical polymers for hot melt extrusion processing: a comprehensive review
Rishi Thakkar et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Fabrication of Intragastric Floating, Controlled Release 3D Printed Theophylline Tablets Using Hot-Melt Extrusion and Fused Deposition Modeling
Bhupendra Raj Giri et al.
PHARMACEUTICS (2020)
Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials-Process Perspective
Mohammad A. Azad et al.
PHARMACEUTICS (2020)
3D printing by fused deposition modeling of single- and multi-compartment hollow systems for oral delivery - A review
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
3D Printing of Tunable Zero-Order Release Printlets
Fabrizio Fina et al.
POLYMERS (2020)
Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics
Gabriela G. Pereira et al.
PHARMACEUTICS (2020)
I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets
Patricija Januskaite et al.
PHARMACEUTICS (2020)
The Digital Pharmacies Era: How 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality
Maisa R. P. Araujo et al.
PHARMACEUTICS (2019)
Evaluation of Hydrogenated Soybean Phosphatidylcholine Matrices Prepared by Hot Melt Extrusion for Oral Controlled Delivery of Water-Soluble Drugs
Marina Kolbina et al.
AAPS PHARMSCITECH (2019)
Hot-melt extrusion in the pharmaceutical industry: toward filing a new drug application
Marta F. Simoes et al.
DRUG DISCOVERY TODAY (2019)
Modeling, design and manufacture of innovative floating gastroretentive drug delivery systems based on hot-melt extruded tubes
Fabian J. Simons et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2019)
Novel Hot Melt Extruded Matrices of Hydroxypropyl Cellulose and Amorphous Felodipine-Plasticized Hydroxypropyl Methylcellulose as Controlled Release Systems
Shan Yi et al.
AAPS PHARMSCITECH (2019)
3D printed oral theophylline doses with innovative 'radiator-like' design: Impact of polyethylene oxide (PEO) molecular weight
Abdullah Isreb et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Plasticiser-Free 3D Printed Hydrophilic Matrices: Quantitative 3D Surface Texture, Mechanical, Swelling, Erosion, Drug Release and Pharmacokinetic Studies
Zara Khizer et al.
POLYMERS (2019)
Preparation of Filaments and the 3D Printing of Dronedarone HCl Tablets for Treating Cardiac Arrhythmias
Gordana Matijasic et al.
AAPS PHARMSCITECH (2019)
Fused Deposition Modeling as an Effective Tool for Anti-Infective Dialysis Catheter Fabrication
Essyrose Mathew et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Impact of Processing Parameters on the Quality of Pharmaceutical Solid Dosage Forms Produced by Fused Deposition Modeling (FDM)
Muqdad Alhijjaj et al.
PHARMACEUTICS (2019)
Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling
Johanna Aho et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
3D printing of oral drugs: a new reality or hype?
Wen-Kai Hsiao et al.
EXPERT OPINION ON DRUG DELIVERY (2018)
Cocrystals of zonisamide: physicochemical characterization and sustained release solid forms
Srinivasulu Aitipamula et al.
CRYSTENGCOMM (2018)
Initial Risk Assessment as part of the Quality by Design in peptide drug containing formulation development
E. Pallagi et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
On demand manufacturing of patient-specific liquid capsules via coordinated 3D printing and liquid dispensing
Tochukwu C. Okwuosa et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
From 'fixed dose combinations' to 'a dynamic dose combiner': 3D printed bi-layer antihypertensive tablets
Muzna Sadia et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
3D printed medicines: A new branch of digital healthcare
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Selection of Solid-State Plasticizers as Processing Aids for Hot-Melt Extrusion
Dipen Desai et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release, Drug-Polymer Miscibility and Printability
Nayan G. Solanki et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Formulation development and process analysis of drug-loaded filaments manufactured via hot-melt extrusion for 3D-printing of medicines
Carolin Korte et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2018)
Extended release delivery system of metoprolol succinate using hot-melt extrusion: effect of release modifier on methacrylic acid copolymer
Kiran P. Sawant et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2018)
3D printing of a wearable personalized oral delivery device: A first-in-human study
Kun Liang et al.
SCIENCE ADVANCES (2018)
3D printing of tablets containing amorphous aripiprazole by filaments co-extrusion
Witold Jamroz et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2018)
Evaluation of Affinisol® HPMC polymers for direct compression process applications
Pinak Khatri et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2018)
Role of Polymers in 3D Printing Technology for Drug Delivery - An Overview
Ankit Jain et al.
CURRENT PHARMACEUTICAL DESIGN (2018)
A Comprehensive Map of FDA-Approved Pharmaceutical Products
Hao Zhong et al.
PHARMACEUTICS (2018)
Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery
Deck Khong Tan et al.
PHARMACEUTICS (2018)
Application of hot melt extrusion for improving bioavailability of artemisinin a thermolabile drug
C. Kulkarni et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2018)
Melt Extrusion for a High Melting Point Compound with Improved Solubility and Sustained Release
Jiannan Lu et al.
AAPS PHARMSCITECH (2018)
The preparation and evaluation of salt forms of linogliride with reduced solubilities as candidates for extended release
Frank A. Chrzanowski et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2017)
Engineering hot-melt extruded solid dispersion for controlled release of hydrophilic drugs
Shuli Zhang et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2017)
Patient acceptability of 3D printed medicines
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Jiaxiang Zhang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing
Natalja Genina et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Process analytical quality control of tailored drug release formulation prepared via hot-melt extrusion technology
Jun-Bom Park et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2017)
3D printed oral solid dosage forms containing hydrochlorothiazide for controlled drug delivery
Christos I. Gioumouxouzis et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2017)
Hydroxypropyl methylcellulose-based controlled release dosage by melt extrusion and 3D printing: Structure and drug release correlation
Jiaxiang Zhang et al.
CARBOHYDRATE POLYMERS (2017)
Bioadhesive Drug Delivery System for Enhancing the Permeability of a BCS Class III Drug via Hot-Melt Extrusion Technology
Nicole S. Mendonsa et al.
AAPS PHARMSCITECH (2017)
Design and Evaluation of Topical Diclofenac Sodium Gel Using Hot Melt Extrusion Technology as a Continuous Manufacturing Process with Kolliphor® P407
Jaywant Pawar et al.
AAPS PHARMSCITECH (2017)
A New Extrudable Form of Hypromellose: AFFINISOL™ HPMC HME
Siyuan Huang et al.
AAPS PHARMSCITECH (2016)
Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
Hemlata Patil et al.
AAPS PHARMSCITECH (2016)
Current Trends in Self-Emulsifying Drug Delivery Systems (SEDDSs) to Enhance the Bioavailability of Poorly Water-Soluble Drugs
Rohit Karwal et al.
CRITICAL REVIEWS IN THERAPEUTIC DRUG CARRIER SYSTEMS (2016)
A novel floating controlled release drug delivery system prepared by hot-melt extrusion
Anh Q. Vo et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing
Muqdad Alhijjaj et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2016)
A comparative study between melt granulation/compression and hot melt extrusion/injection molding for the manufacturing of oral sustained release thermoplastic polyurethane matrices
G. Verstraete et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Continuous production of itraconazole-based solid dispersions by hot melt extrusion: Preformulation, optimization and design space determination
Justine Thiry et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based caplets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
PEO hot melt extrudates for controlled drug delivery: Importance of the molecular weight
O. Cantin et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2016)
Co-extrusion as a processing technique to manufacture a dual sustained release fixed-dose combination product
An-Katrien Vynckier et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2016)
Evaluation of topical hesperetin matrix film for back-of-the-eye delivery
Goutham R. Adelli et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Controlled drug release from melt-extrudates through processing parameters: A chemometric approach
Abraham G. Sarraf et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Effect of geometry on drug release from 3D printed tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
Continuous Production of Fenofibrate Solid Lipid Nanoparticles by Hot-Melt Extrusion Technology: a Systematic Study Based on a Quality by Design Approach
Hemlata Patil et al.
AAPS JOURNAL (2015)
Evaluation of the hyperbranched polymer Hybrane H1500 for production of matricial controlled-release particles by hot-melt extrusion
Elena Ravina-Eirin et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
In silico simulation of niacin release from lipid tablets: Theoretical predictions and independent experiments
C. Velghe et al.
JOURNAL OF CONTROLLED RELEASE (2014)
Formulation and Evaluation of Sustained Release Extrudes Prepared via Novel Hot Melt Extrusion Technique
Ravindra Tiwari et al.
JOURNAL OF PHARMACEUTICAL INNOVATION (2014)
Development of sustained-release formulations processed by hot-melt extrusion by using a quality-by-design approach
Muhammad T. Islam et al.
DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2014)
Low-Viscosity Hydroxypropylcellulose (HPC) Grades SL and SSL: Versatile Pharmaceutical Polymers for Dissolution Enhancement, Controlled Release, and Pharmaceutical Processing
Ashish Sarode et al.
AAPS PHARMSCITECH (2013)
Plasticizer Effects on Physical-Mechanical Properties of Solvent Cast Soluplus® Films
Hanpin Lim et al.
AAPS PHARMSCITECH (2013)
Development of a HPMC-based controlled release formulation with hot melt extrusion (HME)
Decheng Ma et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2013)
Development and evaluation of a hot-melt coating technique for enteric coating
Arun Trambak Patil et al.
BRAZILIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2012)
Ethylene vinyl acetate as matrix for oral sustained release dosage forms produced via hot-melt extrusion
A. Almeida et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2011)
Controlled Release Systems Containing Solid Dispersions: Strategies and Mechanisms
Phuong Ha-Lien Tran et al.
PHARMACEUTICAL RESEARCH (2011)
Effect of hydrophilic and hydrophobic polymers on release kinetics of metoprolol succinate extended release tablets
Ramani Gade et al.
ASIAN JOURNAL OF PHARMACEUTICS (2011)
Influence of plasticizer type and level on the properties of Eudragit® S100 matrix pellets prepared by hot-melt extrusion
Sandra U. Schilling et al.
JOURNAL OF MICROENCAPSULATION (2010)
Development and characterization of extended release Kollidon® SR mini-matrices prepared by hot-melt extrusion
Isik Ozguney et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2009)
Influence of polyethylene glycol/polyethylene oxide on the release characteristics of sustained-release ethylcellulose mini-matrices produced by hot-melt extrusion: in vitro and in vivo evaluations
E. Verhoeven et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2009)
Influence of formulation and process parameters on the release characteristics of ethylcellulose sustained-release mini-matrices produced by hot-melt extrusion
E. Verhoeven et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
Applications of hot-melt extrusion for drug delivery
Michael A. Repka et al.
EXPERT OPINION ON DRUG DELIVERY (2008)
Pharmaceutical applications of hot-melt extrusion: Part I
Michael M. Crowley et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2007)
Xanthan gum to tailor drug release of sustained-release ethylcellulose mini-matrices prepared via hot-melt extrusion: in vitro and in vivo evaluation
E. Verhoeven et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2006)
Properties of sustained release hot-melt extruded tablets containing chitosan and xanthan gum
M Fukuda et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)
The effect of pressurized carbon dioxide as a temporary plasticizer and foaming agent on the hot stage extrusion process and extrudate properties of solid dispersions of itraconazole with PVP-VA 64
G Verreck et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2005)
Hot-melt extruded ethylcellulose cylinders containing a HPMC-gelucire® core for sustained drug delivery
E Mehuys et al.
JOURNAL OF CONTROLLED RELEASE (2004)
Compression forces and amount of outer coating layer affecting the time-controlled disintegration of the compression-coated tablets prepared by direct compression with micronized ethylcellulose
KH Lin et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2001)
Properties of lipophilic matrix tablets containing phenylpropanolamine hydrochloride prepared by hot-melt extrusion
JP Liu et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2001)