Journal
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume 164, Issue -, Pages -Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijheatmasstransfer.2020.120573
Keywords
Patterned-fins optimization; Charging performance enhancement; Phase change materials; Enthalpy-porosity method; Numerical simulation
Categories
Funding
- National Natural Science Foundation of China [51906028]
- Fundamental Research Funds for the Central Universities [3132020113]
- Research Start-up Foundation of Dalian Maritime University [02503005]
Ask authors/readers for more resources
Optimizing the dimensions of metal fins can significantly enhance the charging performance of PCM-based thermal energy storage systems by shortening the total charging time and integrating different controlled regions during the charging process. The results provide an effective guideline for designing optimum patterned-fins to enhance the average charging performances of lowly conductive PCM-based thermal energy storage systems and expanding their applications.
Structures and dimensions of highly conductive metal fins applied to reinforce the charging performances of organic phase change materials (PCM) such as paraffin wax have not been systematically analyzed and accurately designed yet. Therefore, an optimization of the patterned metal fins for enhancing the charging performances of PCM-based thermal energy storage systems is numerically conducted using the enthalpy-porosity method by adjusting the areas of the convection-controlled and conduction-controlled regions through the patterned-fins dimensions during the charging process. Two optimization arrangements are conducted and the optimum patterned-fins are respectively obtained in this study. The results demonstrate that the optimum patterned-fins can obviously shorten the total charging time thus greatly enhance the charging performance of the poorly conductive PCM-based thermal energy storage system compared to the completely vertical triple-fin system through perfectly integrating the convection-controlled and conduction-controlled regions during the charging process. About 63.7%, 48.5% and 42.7% enhancements can be respectively obtained by the optimum patterned-fins under the heating temperatures of 85 degrees C, 90 degrees C and 95 degrees C via optimization arrangement I. Moreover, around 61.9%, 44.1% and 38.4% enhancements can be achieved by optimization arrangement II, which is a bit lower than that induced by optimization arrangement I due to the weaker convection effect using optimization arrangement II. The results provide an effective guideline and database for designing the optimum patterned-fins to enhance the average charging performances of lowly conductive PCM-based thermal energy storage and thus expanding their applications. (C) 2020 Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available