Journal
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume 164, Issue -, Pages -Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijheatmasstransfer.2020.120460
Keywords
Microchannels; Boiling heat transfer; Gradient-porous-wall; Phase separation
Categories
Funding
- National Natural Science Foundation of China [51821004]
Ask authors/readers for more resources
A new concept of phase-separation evaporator is proposed in this study, where flow instabilities can be suppressed by using gradient pinfin-porous wall microchannels. The high-frequency release of vapor bubbles and stable heat transfer in bare channels enable stable heat transfer under different operating parameters.
Microchannel evaporator has intrinsic drawback of two-phase flow instabilities with large pressure drop that is induced from bubble blockage in microchannels. Here, we propose a new concept of phase-separation evaporator, in which flow instabilities can be completely suppressed by using gradient pinfin-porous wall microchannels. The phase-separation concept stems from the self-driven motion of nucleated bubbles from pin-fin region to bare channel region. Vapor bubbles release from porous wall at a high frequency of similar to 1000 Hz that ensures bare channels not totally wrapped by vapor. Thus, ultra-stable flow and heat transfer can be achieved in a wide range of operating parameters: T-in = 81.992.6 degrees C, P-in = 110.57219.77 kPa, G = 112264 kg/m(2)s, q = 20.79 similar to 292.82 kW/m(2) and x(out) = 0.005 similar to 0.318. Both convective evaporation in bare channels and bubble nucleation in porous walls contribute to enhanced performance. Heat transfer coefficients are not changed as the Bo numbers ranging from 6.91 x 10(-5) to 7.44 x 10(-4). This is because when heat flux and/or mass flux is changed, one mechanism is strengthened while the other mechanism is weakened to achieve constant overall heat transfer coefficient. This heat transfer mechanism is different from that in conventional microchannels in which nucleation mechanism dominates at small Bo while convective mechanism dominates at large Bo. With mass fluxes in the range of 112 264 kg/m(2)s, pressure drops are not changed versus mass fluxes at a given heat flux, which are caused by the thermal driving effect in porous walls. Stable heat transfer coefficients and pressure drops ensure flexible selection of running parameters. The evaporator can operate at smaller mass flow rates, as long as dry-out does not occur, it can also operate at larger flow rates without accompanying additional pressure drops. (C) 2020 Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available