Related references
Note: Only part of the references are listed.Rubber fatigue life prediction using a random forest method and nonlinear cumulative fatigue damage model
Qiaobin Liu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Linear and non-linear SVM prediction for fresh properties and compressive strength of high volume fly ash self-compacting concrete
Mohammad Azimi-Pour et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
R. Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Mechanical and corrosion characterization of industrially treated 316L stainless steel surfaces
L. B. Coelho et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Microstructural damage and fracture mechanisms of selective laser melted Al-Si alloys under fatigue loading
Mustafa Awd et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Compaction property prediction of mixed gangue backfill materials using hybrid intelligence models: A new approach
Baiyi Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion
A. du Plessis et al.
ADDITIVE MANUFACTURING (2020)
Damage mode identification of adhesive composite joints under hygrothermal environment using acoustic emission and machine learning
D. Xu et al.
COMPOSITE STRUCTURES (2019)
A comparison of random forest and support vector machine approaches to predict coal spontaneous combustion in gob
Changkui Lei et al.
FUEL (2019)
Fatigue performances of selective laser melted Ti-6Al-4V alloy: Influence of surface finishing, hot isostatic pressing and heat treatments
Hanchen Yu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Machine learning for composite materials
Chun-Teh Chen et al.
MRS COMMUNICATIONS (2019)
The State of the Art of Data Science and Engineering in Structural Health Monitoring
Yuequan Bao et al.
ENGINEERING (2019)
High cycle fatigue and ratcheting interaction of laser powder bed fusion stainless steel 316L: Fracture behaviour and stress-based modelling
Meng Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Development of a novel fatigue damage model with AM effects for life prediction of commonly-used alloys in aerospace
Zhixin Zhan et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Fatigue life and microstructure of additive manufactured Ti6Al4V after different finishing processes
L. Denti et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Phase-field modeling and machine learning of electric-thermal-mechanical breakdown of polymer-based dielectrics
Zhong-Hui Shen et al.
NATURE COMMUNICATIONS (2019)
Fatigue of additively manufactured 316L stainless steel: The influence of porosity and surface roughness
Klas Solberg et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion
Chola Elangeswaran et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue life prediction for AlSi10Mg components produced by selective laser melting
Ming Tang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue life prediction for vibration isolation rubber based on parameter-optimized support vector machine model
Qiaobin Liu et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Structure-Mechanical Stability Relations of Metal-Organic Frameworks via Machine Learning
Peyman Z. Moghadam et al.
MATTER (2019)
Remaining Useful Life Estimation of Aircraft Engines Using a Modified Similarity and Supporting Vector Machine (SVM) Approach
Zhongzhe Chen et al.
ENERGIES (2018)
Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting
O. Fergani et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Fatigue strength of blunt V-notched specimens produced by selective laser melting of Ti-6Al-4V
N. Razavi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Biocompatible Zirconia-Coated 316 stainless steel with anticorrosive behavior for biomedical application
Gobi Saravanan Kaliaraj et al.
CERAMICS INTERNATIONAL (2018)
The influence of laminate stacking sequence on ballistic limit using a combined Experimental/FEM/Artificial Neural Networks (ANN) methodology
J. A. Artero-Guerrero et al.
COMPOSITE STRUCTURES (2018)
Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
S. Romano et al.
ENGINEERING FRACTURE MECHANICS (2018)
Remaining fatigue life assessment of in-service road bridge decks based upon artificial neural networks
Eissa Fathalla et al.
ENGINEERING STRUCTURES (2018)
An online tool for predicting fatigue strength of steel alloys based on ensemble data mining
Ankit Agrawal et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
Jonathan Pegues et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Fatigue behavior prediction and analysis of shot peened mild carbon steels
Erfan Maleki et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Artificial neural network for random fatigue loading analysis including the effect of mean stress
J. F. Durodola et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity
M. Benedetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
An intelligent modelling framework for mechanical properties of cemented paste backfill
Chongchong Qi et al.
MINERALS ENGINEERING (2018)
Inclusion evolution in additive manufactured 316L stainless steel by laser metal deposition process
Du-Rim Eo et al.
MATERIALS & DESIGN (2018)
On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing
Sara Bagherifard et al.
MATERIALS & DESIGN (2018)
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
Haniyeh Fayazfar et al.
MATERIALS & DESIGN (2018)
Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting
Decheng Kong et al.
MATERIALS & DESIGN (2018)
Predictive models for fatigue property of laser powder bed fusion stainless steel 316L
Meng Zhang et al.
MATERIALS & DESIGN (2018)
Variable selection and prediction of uniaxial compressive strength and modulus of elasticity by random forest
S. S. Matin et al.
APPLIED SOFT COMPUTING (2018)
Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
Hiroshige Masuo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
A simplified method to predict fatigue damage of TTR subjected to short-term VIV using artificial neural network
Eileen Wee Chin Wong et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
De novo composite design based on machine learning algorithm
Grace X. Gu et al.
EXTREME MECHANICS LETTERS (2018)
Trees vs Neurons: Comparison between random forest and ANN for high-resolution prediction of building energy consumption
Muhammad Waseem Ahmad et al.
ENERGY AND BUILDINGS (2017)
Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications
Yuan Zhong et al.
JOURNAL OF NUCLEAR MATERIALS (2017)
Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L: Influence of processing parameters
Meng Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Wind Turbine Blade Damage Detection Using Supervised Machine Learning Algorithms
Taylor Regan et al.
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2017)
Epileptic seizure detection in EEG signals using tunable-Q factor wavelet transform and bootstrap aggregating
Ahnaf Rashik Hassan et al.
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE (2016)
Continuum damage mechanics-based approach to the fatigue life prediction for 7050-T7451 aluminum alloy with impact pit
Zhixin Zhan et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2016)
Random forest in remote sensing: A review of applications and future directions
Mariana Belgiu et al.
ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2016)
Application of artificial neural network for predicting crack growth direction in multiple cracks geometry
Deepayan Gope et al.
APPLIED SOFT COMPUTING (2015)
A continuum damage mechanics model for pit-to-crack transition in AA2024-T3
M. Amiri et al.
CORROSION SCIENCE (2015)
Prediction of fretting fatigue crack initiation in double lap bolted joint using Continuum Damage Mechanics
A. Ferjaoui et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
One-equation integration algorithm of a generalized quadratic yield function with Chaboche non-linear isotropic/kinematic hardening
M. Wali et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
Noriko Read et al.
MATERIALS & DESIGN (2015)
Machine learning predictive models for mineral prospectivity: An evaluation of neural networks, random forest, regression trees and support vector machines
V. Rodriguez-Galiano et al.
ORE GEOLOGY REVIEWS (2015)
A damage mechanics approach to fretting fatigue life prediction with consideration of elastic-plastic damage model and wear
Fei Shen et al.
TRIBOLOGY INTERNATIONAL (2015)
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Bernhard Mueller
ASSEMBLY AUTOMATION (2014)
Review on fracture and crack propagation in weldments - A fracture mechanics perspective
U. Zerbst et al.
ENGINEERING FRACTURE MECHANICS (2014)
Approximating support vector machine with artificial neural network for fast prediction
Seokho Kang et al.
EXPERT SYSTEMS WITH APPLICATIONS (2014)
Lifetime of semi-ductile materials through the critical plane approach
Karolina Walat et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
An improved damage evolution law based on continuum damage mechanics and its dependence on both stress triaxiality and the third invariant
L. Malcher et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Crack propagation in pneumatic tires: Continuum mechanics and fracture mechanics approaches
G. Previati et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
A critical distance/plane method to estimate finite life of notched components under variable amplitude uniaxial/multiaxial fatigue loading
Luca Susmel et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
A continuum damage mechanics framework for modeling micro-damage healing
Masoud K. Darabi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: Effects of two-blocks loading and R ratio
G. Ayoub et al.
MECHANICS OF MATERIALS (2012)
Vertical bagging decision trees model for credit scoring
Defu Zhang et al.
EXPERT SYSTEMS WITH APPLICATIONS (2010)
Share Paper
