Related references
Note: Only part of the references are listed.Assessment and quantification of ballistic impact damage of a single-layer woven fabric composite
Enock Bonyi et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2019)
Experimental and numerical comparisons of ballistic impact behaviors between 3D angle-interlock woven fabric and its reinforced composite
Pibo Ma et al.
JOURNAL OF INDUSTRIAL TEXTILES (2019)
Suitability of numerical model from low to high velocity impacts against KM2 fabrics with isotropic hypothesis
Hector Lopez-Galvez et al.
COMPOSITE STRUCTURES (2019)
Ballistic impact mechanisms - A review on textiles and fibre-reinforced composites impact responses
Mulat Alubel Abtew et al.
COMPOSITE STRUCTURES (2019)
Influence of fabric architecture on energy absorption efficiency of soft armour panel under ballistic impact
Yanfei Yang et al.
COMPOSITE STRUCTURES (2019)
2Engineering of 3D warp interlock p-aramid fabric structure and its energy absorption capabilities against ballistic impact for body armour applications
Mulat Alubel Abtew et al.
COMPOSITE STRUCTURES (2019)
On a multi-scale finite element model for evaluating ballistic performance of multi-ply woven fabrics
Emre Palta et al.
COMPOSITE STRUCTURES (2019)
Evaluating impact damage to fabric-based personal armor by infrared NDT
O. N. Budadin et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2019)
Progressive failure prediction of woven fabric composites using a multi-scale approach
Lei Xu et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2018)
Improvement in failure prediction algorithm for textile composites
Ali Hallal et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2018)
Ballistic impact performance of spaced multilayered and monolithic composite targets: Analytical and experimental studies
P. S. Patil et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2018)
Multi-Scale Modeling of Composites with Surrogate and Uncertainty in Residual Velocity for High-Speed Impacts
Minhyung Lee et al.
INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2018)
Effects of ply orientation and material on the ballistic impact behavior of multilayer plain-weave aramid fabric targets
Gaurav Nilakantan et al.
DEFENCE TECHNOLOGY (2018)
Ballistic performance of angle-interlock woven fabrics
Dan Yang et al.
JOURNAL OF THE TEXTILE INSTITUTE (2017)
Numerical study of inter-yarn friction on the failure of fabrics upon ballistic impacts
Yanyan Chu et al.
MATERIALS & DESIGN (2017)
Investigation of failure modes and influence on ballistic performance of Ultra-High Molecular Weight Polyethylene (UHMWPE) uni-directional laminate for hybrid design
Yanfei Yang et al.
COMPOSITE STRUCTURES (2017)
Ballistic performance of hybrid thermoplastic composite armors reinforced with Kevlar and basalt fabrics
Aswani Kumar Bandaru et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact
Cuong Ha-Minh et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Low velocity impact response of 2D and 3D Kevlar/polypropylene composites
Aswani Kumar Bandaru et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Determination of inter-yarn friction and its effect on ballistic response of para-aramid woven fabric under low velocity impact
Sanhita Das et al.
COMPOSITE STRUCTURES (2015)
A numerical study of ply orientation on ballistic impact resistance of multi-ply fabric panels
Ying Wang et al.
COMPOSITES PART B-ENGINEERING (2015)
Energy absorption of three-dimensional angle-interlock woven composite under ballistic penetration based on a multi-scale finite element model
Kun Luan et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Ballistic impact behavior of 2D plain weave fabric targets with multiple layers: Analytical formulation
Shaktivesh et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Finite element modeling of ballistic impact on multi-layer Kevlar 49 fabrics
Deju Zhu et al.
COMPOSITES PART B-ENGINEERING (2014)
Influence of yarn gripping on the ballistic performance of woven fabrics from ultra-high molecular weight polyethylene fibre
Yi Zhou et al.
COMPOSITES PART B-ENGINEERING (2014)
Numerical Simulation of Projectile Impact on Mild Steel Armour Plates using LS-DYNA: Part I: Validation
A. Deb et al.
DEFENCE SCIENCE JOURNAL (2014)
MULTI-SCALE MODEL TO PREDICT THE BALLISTIC IMPACT BEHAVIOR OF MULTI-LAYER PLAIN-WOVEN FABRICS
C. Ha Minh et al.
INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS (2014)
Effects of architecture on ballistic resistance of textile fabrics: Numerical study
P. Tran et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2014)
Ballistic impact damages of 3-D angle-interlock woven composites based on high strain rate constitutive equation of fiber tows
Kun Luan et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)
Effect of Frictions on the Ballistic Performance of a 3D Warp Interlock Fabric: Numerical Analysis
Cuong Ha-Minh et al.
APPLIED COMPOSITE MATERIALS (2012)
A Numerical Simulation on Ballistic Penetration Damage of 3D Orthogonal Woven Fabric at Microstructure Level
Xiwen Jia et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2012)
FEM simulation of 3D angle-interlock woven composite under ballistic impact from unit cell approach
Zhijiang Li et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
Measurement of strain in fabrics under ballistic impact using embedded nichrome wires, part II: Results and analysis
Sidney Chocron et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Development of Fabric Constitutive Behavior for Use in Modeling Engine Fan Blade-Out Events
S. Bansal et al.
JOURNAL OF AEROSPACE ENGINEERING (2009)
Global/Local Modeling of Ballistic Impact onto Woven Fabrics
M. P. Rao et al.
JOURNAL OF COMPOSITE MATERIALS (2009)
Computational analysis of impact of a bullet against the multilayer fabrics in LS-DYNA
Rimantas Barauskas et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2007)
Mechanical properties of Kevlar® KM2 single fiber
M Cheng et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2005)
Ballistic penetration of conically cylindrical steel projectile into plain-woven fabric target - A finite element simulation
BH Gu
JOURNAL OF COMPOSITE MATERIALS (2004)
Analytical modeling for the ballistic perforation of planar plain-woven fabric target by projectile
BH Gu
COMPOSITES PART B-ENGINEERING (2003)
Finite-element modeling of the ballistic impact of fabric armor
CT Lim et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2003)
Share Paper
