Limited-angle ultrasonic tomography back-projection imaging

Ultrasonic inspection of through-transmission is limited due to the inability to obtain defect depth information. Loss of signal is used as the only indicator, providing lateral defect information. This is often a problem in ultrasonic inspection. Radiographic acquisition techniques, where the X-ray source acts as the transmitter and the detector as the receiver, are conceptionally similar to ultrasonic through-transmission. In the latter, the tomography back-projection method is used to reconstruct images of an object that has been subjected to a minimum of 180 degrees of rotation, to allow for full coverage of the item. In this paper, a novel approach based on back-projection is presented to improve image resolution and defect detectability. Two ultrasonic transducers in through-transmission configuration are utilised to capture data for image processing. The rotation of the transmitter and receiver is not possible in this set-up and, therefore, the reconstruction relies on the artificial generation of a limited rotation. Two probes are aligned either side of the material and are used to gather the ultrasonic signals. These signals are processed before the reconstruction algorithm is applied to them. Various processing and imaging reconstruction algorithms are explored, building on the basic back-projection method to obtain images that are better focused. This technique could be used within materials where there are high attenuation levels and, therefore, traditional pulse-echo is not feasible.

Automated summary

Through-transmission ultrasonic inspection is limited in obtaining defect depth information, but a novel approach based on back-projection can improve image resolution and defect detectability. Two transducers are used to capture data for image processing, with various algorithms explored to enhance image focus.