4.2 Article

Solving the soft furnishings fire problem (without incurring collateral damage)

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Bedding ignition, vertical flame spread and subsequent thermal impact on underlying mattress

Mark T. Gratkowski

Summary: The study investigated the ignition and vertical flame spread of bedding materials along the side of a noncombustible surrogate bed set. Results showed variations in ignition timing and flame spread speed depending on the bedding material. The thermal exposure from burning bedding to the vertical sides of the bed set was found to be influenced by the vertical flame spread rate and thickness of the bedding materials.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Studying smoldering to flaming transition in polyurethane furniture subassemblies: Effects of fabrics, flame retardants, and material type

Alexander B. Morgan et al.

Summary: Materials prone to smoldering can lead to ignition and propagation to foam, while flame retardant materials can prevent this transition. The transition from smoldering to flaming occurs when oxygen consumption exceeds supply, leading to thermal decomposition and high fuel concentrations for flaming combustion.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Revisiting flexible polyurethane foam flammability in furniture and bedding in the United States

Alexander B. Morgan

Summary: The flammability of flexible polyurethane foam has been well studied, with known fire risks when not protected. Current available technologies for fire protection and their pros and cons need further discussion.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Fire safe, sustainable loose furnishing

Karolina Storesund et al.

Summary: This exploratory study aims to investigate the fire properties and environmental aspects of different upholstery material combinations, particularly for domestic applications. Sustainability and circularity of selected textiles were analyzed qualitatively through lifecycle assessment, while the cone calorimeter was used to screen 20 material combinations for fire performance. The study found that blending conventional fibers with fire resistant specialty fibers can improve the fire properties of textile covers, and a new three-dimensional web structure as an alternative padding material shows promising fire properties in terms of ignition time, heat release rates, and smoke production.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Soft furnishing fires: They're still a problem

Marty Ahrens

Summary: Home fires involving soft furnishings contribute significantly to fire deaths in the US, with smoking materials being a leading cause. Despite a decrease in overall deaths compared to the 1980s, the death rate per 1000 reported fires has doubled. Understanding the causes of these fires is essential for developing effective prevention strategies.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Chemical exposure and flammability risks of upholstered furniture

Debra Harris et al.

Summary: Upholstered furniture poses fire hazards to consumers, but using effective fire barrier materials can reduce the risk of combustion. This study developed methods to evaluate flame retardant exposure and flammability performance on upholstered chairs, finding that volatile organic compound exposure was low during consumer use. The study suggests that upholstered chairs constructed with an efficient fire barrier material can achieve both human health and fire safety benefits without the need for added flame retardants.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Reduced-scaletest to assess the effect of fire barriers on the flaming combustion of cored composites: Anupholstery-materialcase study

Mauro Zammarano et al.

Summary: This study introduces a reduced-scale test (Cube test) for measuring fire performance, comparing it to the ASTM standard test to find that the Cube test is less affected by edge effects. By measuring the wetting point, the relevance of full-scale fire performance and failure mechanism of fire barriers can be inferred.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Combustion behavior of upholstered furniture. Important findings, practical use, and implications

Bjorn Sundstrom

Summary: The Combustion Behavior of Upholstered Furniture (CBUF) project was initiated by the European Commission (EC) to provide scientific basis for improving fire safety in Europe. Although the furniture directive was not implemented, the project gained valuable insights into furniture burning behavior, composition effects, and prediction accuracy of different models in full-scale tests.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Experimental investigation into the influence of ignition location on flame spread and heat release rates of polyurethane foam slabs

Konrad Wilkens Flecknoe-Brown et al.

Summary: This study investigated the influence of ignition location on the fire behavior of flexible polyurethane foam slabs through 11 large-scale open fire tests. Results showed clear shapes in heat release rate and flame spread rate data, with different behaviors observed depending on ignition location. The study highlighted the importance of considering ignition location in modeling fire behavior of polyurethane foam.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Effects of upholstery materials on the burning behavior of real-scale residential upholstered furniture mock-ups

William M. Pitts et al.

Summary: Investigations on fire spread and growth on real-scale mock-ups of residential upholstered furniture revealed that changes in materials such as barrier and fabric have significant effects on burning behavior, indicating the importance of considering these factors in predicting the behavior of such furniture.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

The roles of standard cigarettes in assuring the ignition resistance of soft furnishings

Richard G. Gann et al.

Summary: Regulations for cigarette ignition resistance and less fire-prone cigarettes have significantly reduced losses from cigarette-initiated fires over time. Standard reference cigarettes play key roles in ensuring compliance with regulations and maintaining effectiveness of fire safety regulations amid external changes.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Estimating the impact of the mattress fire safety Standard 16 CFR Part 1633 on bed fire outcomes

Stanley W. Gilbert et al.

Summary: By introducing a new standard, the United States successfully reduced the harm caused by bed fires to personal safety and decreased the number of fire casualties. At the same time, the severity of bed fires is also being reduced. In contrast, residential upholstered furniture fires were not affected by the standard.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

Influence of modern plastic furniture on the fire development in fires in homes: large-scale fire tests in living rooms

Anja Hofmann et al.

Summary: Modern furniture burns faster in fires than older furniture, leading to quicker fire development in terms of temperature and smoke production.

FIRE AND MATERIALS (2021)

Article Materials Science, Multidisciplinary

An overview and experimental analysis of furniture fire safety regulations in Europe

Eric Guillaume et al.

FIRE AND MATERIALS (2020)