Related references
Note: Only part of the references are listed.Material behaviour of a dual hardening steel under thermomechanical loading
Benjamin Seisenbacher et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
Cyclic deformation and cracking behavior of 316LN stainless steel under thermomechanical and isothermal fatigue loadings
Bingbing Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of strain rate induced M23C6 distribution on cyclic deformation behavior: Cyclic hardening model
Haizhou Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Cyclic plastic response and damage mechanisms in superaustenitic steel Sanicro 25 in high temperature cycling - Effect of tensile dwells and thermomechanical cycling
Jaroslav Polak et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
High temperature fatigue and creep-fatigue behaviors in a Ni-based superalloy: Damage mechanisms and life assessment
Run-Zi Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Life, dislocation evolution, and fracture mechanism of a 41Fe-25.5Ni-23.5Cr alloy during low cycle fatigue at 700 °C
Haizhou Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue behavior, microstructural evolution, and fatigue life model based on dislocation annihilation of an Fe-Ni-Cr alloy at 700 °C
Haizhou Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Microcrack nucleation and early crack growth of a nuclear grade nitrogen alloyed austenitic stainless steel X2CrNiMo18.12 under thermomechanical fatigue loading
Bingbing Li et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2019)
Microcrack initiation mechanisms of 316LN austenitic stainless steel under in-phase thermomechanical fatigue loading
Bingbing Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Creep-fatigue behaviour of single-crystal Ni-base superalloy CMSX-8
Ernesto A. Estrada Rodas et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Thermomechanical fatigue behaviour of aged heat resistant austenitic alloys
Hugo Warner et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Creep Rupture Assessment of New Heat-Resistant Sanicro 25 Steel Using Different Life Prediction Approaches
Lei Zhao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Cyclic damage behavior of Sanicro 25 alloy at 700 °C: Dispersed damage and concentrated damage
Haizhou Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Cyclic deformation behavior of an Fe-Ni-Cr evolution and cyclic hardening model alloy at 700°C: microstructural evolution and cyclic hardening model
Haizhou Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Initiation and growth of short fatigue cracks in austenitic Sanicro 25 steel
V. Mazanova et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Damage mechanism in austenitic steel during high temperature cyclic loading with dwells
Roman Petras et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Fatigue crack initiation and growth in 43Fe-25Ni-22.5Cr austenitic steel at a temperature of 700 °C
V. Mazanova et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
High temperature creep of Sanicro 25 austenitic steel at low stresses
Lubos Kloc et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Atomic resolution characterization of strengthening nanoparticles in a new high-temperature-capable 43Fe-25Ni-22.5Cr austenitic stainless steel
M. Heczko et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Fracture and Damage Behavior in an Advanced Heat Resistant Austenitic Stainless Steel During LCF, TMF and CF
Hugo Warner et al.
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)
Fatigue behaviour of 16Mo3 steel at elevated temperatures under uniaxial as well as biaxial-planar loading
D. Kulawinski et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Experimental investigation of the time and temperature dependent growth of fatigue crack in inconel 718 and mechanism based lifetime prediction
Michael Schlesinger et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Thermo-mechanical low-cycle fatigue-creep of Haynes 230
Raasheduddin Ahmed et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
On the origin of extraordinary cyclic strengthening of the austenitic stainless steel Sanicro 25 during fatigue at 700 °C
Milan Heczko et al.
JOURNAL OF MATERIALS RESEARCH (2017)
Microstructure and texture study on an advanced heat-resistant alloy during creep
Yu Zhang et al.
MATERIALS CHARACTERIZATION (2017)
High-temperature deformation and fracture mechanisms of an advanced heat resistant Fe-Cr-Ni alloy
Yu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and dislocation arrangements in Sanicro 25 steel fatigued at ambient and elevated temperatures
M. Heczko et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Intergranular Oxidation Effects During Dwell-Time Fatigue of High-Strength Superalloys
Ulrich Krupp et al.
OXIDATION OF METALS (2017)
Basic Mechanisms Leading to Fatigue Failure of Structural Materials
Jaroslav Polak et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)
Phenomenological and microstructural analysis of intermediate temperatures creep in a Ni-Fe-based alloy for advanced ultra-supercritical fossil power plants
F. Sun et al.
ACTA MATERIALIA (2016)
Assessment of thermal fatigue life for 316L and P91 pipe components at elevated temperatures
Karl-Fredrik Nilsson et al.
ENGINEERING FRACTURE MECHANICS (2016)
Evolution of the cyclic plastic response of Sanicro 25 steel cycled at ambient and elevated temperatures
Jaroslav Polak et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Thermomechanical fatigue and damage mechanisms in Sanicro 25 steel
R. Petras et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Damage Evolution in Thermomechanical Loading of Stainless Steel
R. Petras et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Isothermal and thermo-mechanical fatigue behavior of the nickel base superalloy Waspaloy™ under uniaxial and biaxial-planar loading
D. Kulawinski et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Influence of dwell times on the thermomechanical fatigue behavior of a directionally solidified Ni-base superalloy
Stefan Guth et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Experimental study of type 316 stainless steel failure under LCF/TMF loading conditions
R. Hormozi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
High temperature fatigue: behaviour of three typical classes of structural materials
A. Pineau et al.
MATERIALS AT HIGH TEMPERATURES (2015)
Microstructural stability and oxidation behavior of Sanicro 25 during long-term steam exposure in the temperature range 600-750°C
J. Zurek et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)
Localized microtwin formation and failure during out-of-phase thermomechanical fatigue of a single crystal nickel-based superalloy
H. U. Hong et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Low cycle fatigue behavior of Sanicro25 steel at room and at elevated temperature
Jaroslav Polak et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Creep and LCF Behaviors of Newly Developed Advanced Heat Resistant Austenitic Stainless Steel for A-USC
Guocai Chai et al.
6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION (2013)
Thermomechanical and isothermal fatigue behavior of 347 and 316L austenitic stainless tube and pipe steels
Mageshwaran Ramesh et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Thermomechanical fatigue evaluation and life prediction of 316L(N) stainless steel
A. Nagesha et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Precipitation in creep resistant austenitic stainless steels
T Sourmail
MATERIALS SCIENCE AND TECHNOLOGY (2001)
Share Paper
